Sign Regulations in Bedford Town, New York
Bedford Town, New York has specific sign regulations covering 10 sign types across 3 zoning districts. Regulated sign types include Wall Sign (Type A), Projecting Sign (Type B), Freestanding Sign (Type C). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 28, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Bedford Town, New York
Sample Sign Requirements in Bedford Town
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Wall Sign (Type A) | Shall not be higher than the wall; letters, numbers, or symbols max 12 in height unless wall is >100 ft from road center line (then up to 24 in). | Not listed | May be located within required setbacks. |
| Projecting Sign (Type B) | Not less than 10 ft from ground to bottom, not more than 25 ft from ground to top. Shall not extend above the building. | 12 sq ft | May be located within required setbacks. |
| Freestanding Sign (Type C) | Max 4 ft above ground level to top of sign (CB District) | 20 sq ft (CB District) | Must comply with principal building setback requirements of the district. |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
10
- Wall Sign (Type A)
- Projecting Sign (Type B)
- Freestanding Sign (Type C)
- Window Sign (Type D)
- +2 more types
Zoning Districts
3
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Bedford Town
Other Cities in New York
Frequently Asked Questions
In Bedford Town, the height limit for Freestanding Sign (Type C) is 15 ft above ground level to top. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Bedford Town require a permit. From the submission notes on this page: No sign shall be erected or installed, nor shall any existing sign be changed, until a sign permit has been obtained from the Building Inspector. Run a code check for an exact address to see the permit requirements for that zone.
Bedford Town's sign code covers 10 sign types, including Wall Sign (Type A), Projecting Sign (Type B), Freestanding Sign (Type C), and Window Sign (Type D). Most commercial signs need a permit. The ordinance lists 13 exemptions. One of them: "No trespassing" signs. The full list is on this page.
This page doesn't list a single setback distance for signs in Bedford Town. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.
Rules in Bedford Town's sign ordinance that cover digital, changing, or flashing signs: Flashing or intermittently illuminated signs are prohibited. A sign which exhibits changing light or color effects, even though the intensity of light may be relatively constant, shall be deemed a flashing sign. Signs where the source of illumination is visible, including neon-type or LED-type electric signs, are prohibited except where such signs are less than two square feet in area and mounted on the inside of the window of a building. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Bedford Town Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Bedford Town, New York, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Bedford Town, New York Sign Rules at a Glance
Bedford Town, New York regulates 10 sign types across 3 zoning districts. Direction Signs (Type E) are capped at 8 ft tall and 2 sq ft. Most commercial signs in Bedford Town require a permit.
Detailed Sign Ordinance Requirements for Bedford Town, New York
Sign Rules by Zoning District in Bedford Town (3 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| CB District | 6 | Shall not be higher than the wall; letters, numbers, or symbols max 12 in height unless wall is >100 ft from road center line (then up to 24 in). | 20 sq ft (CB District) | Not listed |
| Historic Districts, Historic Downtown Bedford Hills | 1 | Not listed | Not listed | Not listed |
| General Regulations For All Zones | 9 | 15 ft above ground level to top | 25 sq ft | Not listed |
Zone-by-Zone Sign Requirements in Bedford Town
CB District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign (Type A) | Shall not be higher than the wall; letters, numbers, or symbols max 12 in height unless wall is >100 ft from road center line (then up to 24 in). | Not listed | Length of sign not to exceed 7/8 of the facade of the establishment. | May be located within required setbacks. | Not listed | Located anywhere on any wall of the building, provided other requirements met. | Not listed | Unlock | §125-117, §125-120A, §125-120B(1), §125-121B(1)-(2) |
| Projecting Sign (Type B) | Not less than 10 ft from ground to bottom, not more than 25 ft from ground to top. Shall not extend above the building. | 12 sq ft | May not extend more than 50 in from the wall; not beyond the curbline. | May be located within required setbacks. | Not listed | Hung from a bracket attached to building wall. | Not listed | Unlock | §125-117, §125-120B(2), §125-121B(1)-(2) |
| Freestanding Sign (Type C) | Max 4 ft above ground level to top of sign (CB District) | 20 sq ft (CB District) | Not listed | Must comply with principal building setback requirements of the district. | Not listed | Rigidly mounted or hung from bracket on post or structure set in ground. | Not listed | Unlock | §125-117, §125-120B(3), §125-121B(1)-(2) |
| Window Sign (Type D) | Not listed | Not listed | Not listed | Not listed | Not listed | Affixed, displayed, or painted on or within any window/screen. | Not listed | Unlock | §125-117, §125-120B(4), §125-121B(1)-(2) |
| Direction Sign (Type E) | 8 ft above ground level at highest point | 2 sq ft | Not listed | Not listed | Not listed | As required for direction. | Not listed | Unlock | §125-117, §125-120B(5) |
| Announcement Sign (Type F) | Not listed | 1 sq ft | Not listed | Not listed | One per principal use per street frontage; extra at secondary entrances. | Attached to building or bracket or post. | Not listed | Unlock | §125-117, §125-120B(6) |
Historic Districts, Historic Downtown Bedford Hills
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Temporary Sign (In Town Right-of-Way) | Not listed | Not listed | Not listed | Not listed | Not listed | Town right-of-way | Not listed | Unlock | §125-119F |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign (Type A) | Not higher than wall; 12 in character max unless >100 ft from road center (then up to 24 in). | Not listed | Max length 7/8 of the facade. | May be within required setbacks. | Not listed | Anywhere on any wall, observing other rules. | Not listed | Unlock | §125-117, §125-120A, §125-120B(1), §125-121B |
| Projecting Sign (Type B) | Not less than 10 ft from ground to bottom, not more than 25 ft to top; not above building. | 12 sq ft | Extends no more than 50 in from wall, not beyond curbline. | May be within required setbacks. | Not listed | Hung from wall bracket. | Not listed | Unlock | §125-117, §125-120B(2), §125-121B |
| Freestanding Sign (Type C) | 15 ft above ground level to top | 25 sq ft | Not listed | Must comply with principal building setback requirements. | Not listed | Rigidly mounted or bracket on structure or post set in ground. | Not listed | Unlock | §125-117, §125-120B(3), §125-121B |
| Direction Sign (Type E) | 8 ft | 2 sq ft | Not listed | Not listed | Not listed | As necessary for direction, safety, or convenience. | Not listed | Unlock | §125-117, §125-120B(5), §125-121B |
| Announcement Sign (Type F) | Not listed | 1 sq ft per sign | Not listed | Not listed | One per entrance. | Attached to building, bracket, or post. | Not listed | Unlock | §125-117, §125-120B(6), §125-121B |
| Temporary Sign | Not listed | 12 sq ft; banners up to 30 ft long | Not listed | Not listed | Not listed | Town right-of-way except Historic Districts and Historic Downtown Bedford Hills. | Not listed | Unlock | §125-119A-F |
| Farm Product Temporary Sign | Not listed | 6 sq ft per sign | Not listed | Not listed | Maximum 3 per farm | On or in front of farm property; must have owner's permission if not the farm's property. | Not listed | Unlock | §125-119G |
| Christmas Tree Sale Sign | 15 ft if freestanding | 6 sq ft per sign | Not listed | Not listed | 2 per property | On property where sale is conducted. | Not listed | Unlock | §46-9A-E |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Bedford Town with a free PermitPal account.
Run a free code checkProhibited Signs in Bedford Town
- Roof signs are prohibited.
- Flashing or intermittently illuminated signs are prohibited. A sign which exhibits changing light or color effects, even though the intensity of light may be relatively constant, shall be deemed a flashing sign.
- Signs where the source of illumination is visible, including neon-type or LED-type electric signs, are prohibited except where such signs are less than two square feet in area and mounted on the inside of the window of a building.
- Searchlights to attract attention to a sign or permitted use are prohibited.
- Strings of incandescent lights are prohibited.
- Moving or rotating signs are prohibited.
- Pennants, streamers or other eye-catching devices are prohibited.
- Signs on awnings are prohibited.
- Portable signs, with or without wheels, easel type, A-frame or other, are prohibited. Any sign not permanently affixed to a building or the ground is prohibited.
Exempt Signs in Bedford Town
- Signs of or required by duly constituted governmental bodies and their agencies, including traffic signs, legal notices and warnings at railroad crossings. The number and location of such signs shall be as directed by the governmental agency having jurisdiction.
- Flags of the national, state, county or Town government not exceeding 15 square feet; and banners and emblems or name and meeting-place signs of civic, philanthropic, educational or religious organizations or institutions not exceeding 10 square feet.
- Temporary signs located in the Town's public right-of-way in accordance with the provisions of § 125-119.
- Memorial plaques, cornerstones, historical tablets and similar signs.
- Signs required to be maintained or posted by law or governmental order, rule or regulation, unless specifically prohibited, limited or restricted.
- Small, nonilluminated signs, none exceeding one and one-half (1 1/2) square feet in area, displayed strictly for the direction, safety or convenience of the public, including signs which identify rest rooms and other similar facilities or conveniences, parking area entrances or exits and freight entrances, or for purposes of indicating the location or restricting the use of off-street parking areas when these are provided by the owner or occupant of the building.
- Name and address signs, not more than one for each street frontage of each principal use on a lot and not exceeding one square foot in area, showing only the name of the occupant and/or the numerical address designations of the premises on which they are situated.
- Temporary construction signs, not exceeding 12 square feet in area, either affixed to the wall of the building to which they pertain or to a post, identifying the project under construction, participating designers, contractors or developers, etc. Such a sign shall be permitted only during the construction period of the project and shall conform in all respects to the provisions of § 125-121.
- Signs not visible outside of a building.
- Signs displayed in a window indicating the availability of a public telephone or notary public and/or the possession of any licenses normally required to conduct a given business.
- Holiday decorations displayed in season.
- Temporary signs for tag or garage sales, provided that such signs contain the address of the seller and date of the sale, are displayed only two days prior to the sale and are removed the day after the sale.
- "No trespassing" signs.
Sign Plan & Submission Notes for Bedford Town
- No sign shall be erected or installed, nor shall any existing sign be changed, until a sign permit has been obtained from the Building Inspector.
- Issuance of a sign permit is conditioned upon conformance with all applicable provisions of this article and payment of the required permit fee.
- All freestanding and bracket signs in the CB District must be approved by the Planning Board, which reviews design criteria including sign location, size, proportions, scale, materials, texture, color, lettering and illumination.
- Every applicant for a sign permit must pay a fee as listed in the fee schedule adopted by the Town Board.
- Every sign made nonconforming by this chapter or which existed as nonconforming prior to its adoption must be removed or brought into compliance within three years of adoption.
Source: ecode360 municipal code