Sign Regulations in Bellport, New York

Bellport, New York has specific sign regulations covering 26 sign types across 4 zoning districts. Regulated sign types include Lawn Sign (Identifying Resident), Political Sign (Residential), Awning Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 7, 2025

Sign Regulation Overview for Bellport, New York

Sample Sign Requirements in Bellport

Sign TypeMax HeightMax AreaSetback
Historical Marker, Memorial Sign, Plaque, Name of Building (integral to masonry or metal)6 sq ft
Directional Sign (On-premise)4 sq ft per face
Warning/Private Drive/No Trespassing Sign2 sq ft per face

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for BellportFull Coverage

Sign Types Covered

26

  • Lawn Sign (Identifying Resident)
  • Political Sign (Residential)
  • Awning Sign
  • Sandwich Board Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Bellport

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

Sign height limits in Bellport vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Bellport, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Bellport, regulated sign types include Lawn Sign (Identifying Resident), Political Sign (Residential), Awning Sign, Sandwich Board Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Bellport vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Bellport are regulated with specific requirements for brightness, animation, and message duration. Bellport has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Bellport Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Bellport, New York sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Bellport, New York Sign Rules at a Glance

Bellport, New York regulates 26 sign types across 4 zoning districts. Detached or Ground Signs in the Business E District, Professional Business Zone zoning district are capped at 6 ft tall and 25 sq ft, with a 15 ft from front, 5 ft from side, 50 ft from other detached signs setback (Sec. Sec. 21-484(d), 21-486(b)(3)). Most commercial signs in Bellport require a permit.

Detailed Sign Ordinance Requirements for Bellport, New York

Sign Rules by Zoning District in Bellport (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones1948 in50 sq ft
Residential District44 sq ft per side
Business E District, Professional Business Zone748 in25 sq ft
Industrial District150 sq ft

Zone-by-Zone Sign Requirements in Bellport(sample of 3 of 4 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Historical Marker, Memorial Sign, Plaque, Name of Building (integral to masonry or metal)6 sq ftUnlockSec. 21-483(a)(1)
Home Occupation/Professional Office (Freestanding or Attached)2 sq ft10 ft1 per residential buildingAt least 10 ft from highway right-of-wayUnlockSec. 21-483(a)(5)
Temporary Real Estate Sign (Residential)4 sq ft per side1On premisesUnlockSec. 21-483(a)(9)
Temporary Real Estate Sign (Business or Industrial)50 sq ft15 ft from property lines1On premisesUnlockSec. 21-483(a)(9)
Construction/Renovation Sign (Residential)6 sq ft1On premisesUnlockSec. 21-483(a)(11)
Construction/Renovation Sign (Business)16 sq ft1On premisesUnlockSec. 21-483(a)(11)
Sandwich Board Sign48 in24 in x 48 in (8 sq ft)24 inIn front of business it advertisesUnlockSec. 21-486(b)(4)(c)
Satellite Earth Station Antenna10 ft from grade level10 ft from property lines, not closer to street than rear of building1 per building siteNot visible from street where possible; not closer to front street line than rear of principal building; not within 10 ft of any property line;UnlockSec. 21-436(b)

Residential District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Temporary Real Estate Sign4 sq ft per side1On premisesUnlockSec. 21-483(a)(9)
Lawn Sign (identifying resident)1 sq ft (single-faced), 2 sq ft (double-faced)UnlockSec. 21-483(a)(7)
Home Occupation/Professional Office Sign2 sq ft10 ft1At least 10 ft from highway right-of-wayUnlockSec. 21-483(a)(5)
Political Sign (Residential)4 sq ftUnlockSec. 21-483(a)(12)

Business E District, Professional Business Zone

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign15 ftAs calculated by formula; max height 15 ft from ground1 per structure or per business if multipleOn wall fronting public streetUnlockSec. 21-484(b), 21-486(b)(1)
Projecting SignNot above second floor or 12 ft, whichever less4 sq ft1 projecting or 1 wall per businessAt wall fronting street or near main entrance if not on through streetUnlockSec. 21-484(b), (e), 21-486(b)(2)
Detached or Ground Sign6 ft25 sq ft15 ft from front, 5 ft from side, 50 ft from other detached signs1 per structure/buildingFreestanding; in Professional zone must be parallel to roadUnlockSec. 21-484(d), 21-486(b)(3)
Wall/Projecting Sign (Entrance not on through street)2 ft4 sq ft; max width 2 ft; max height 2 ft2 ft1Near business's main entranceUnlockSec. 21-484(e)
Directory Sign (Detached, for obscured businesses)4 sq ft1 per complexUnlockSec. 21-484(f)
Sandwich Board Sign48 in24 in x 48 in (8 sq ft)24 inIn front of business it advertisesUnlockSec. 21-486(b)(4)(c)
Awning SignFlat to surface of awningUnlockSec. 21-486(b)(4)(b)

PermitPal covers all 4 zoning districts in Bellport — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 4 zones for Bellport — start free

Prohibited Signs in Bellport

  • No off-premises signs shall be allowed other than as permitted under the exempt signs provision of section IV.
  • There shall be no illuminated signs located on the exterior of a building or in any windows.
  • There shall be no signs that contain flashing, intermittent, rotating or moving lights.
  • There shall be no rotating or moving signs.
  • No signs shall impair or cause confusion of vehicular or pedestrian traffic, in its design, color or placement.
  • No sign shall impair visibility for the motorist at a street corner or intersection by placement and location within twenty-five (25) feet of the intersection of the street or highway lanes.
  • No sign or sign supports shall be placed upon the roof of any building.
  • No sign shall be attached to any trees, fences or utility poles.
  • No sign shall consist of banners, pennants, ribbons, streamers, spinners or similar moving, fluttering or revolving devices.
  • No advertising message shall be extended over more than one (1) sign placed along a street or highway.
  • There shall be no signs in any residential zone except as allowed under section 4 (regarding exempt signs).
  • There shall be no portable signs.
  • Any illuminated signs existing as of the date of enactment of this law may remain pursuant to the regulations of section 6.
  • No person shall erect, alter or relocate any sign without first obtaining a permit from the building inspector (unless exempted).

Exempt Signs in Bellport

  • Historical markers, tablets and statues, memorial signs and plaques; names of buildings and dates of erection when cut into any masonry surface or when constructed of bronze, stainless steel, or similar material; and emblems installed by governmental agencies, religious or nonprofit organizations; not exceeding six (6) square feet.
  • Flags and insignia of any government, except when displayed in connection with commercial promotion.
  • On-premise directional signs for the convenience of the general public, entrances and exits and similar signs, not exceeding four (4) square feet per face. Business names and personal names shall not be allowed.
  • Warning, private drive, posted or no trespassing signs, not exceeding two (2) square feet per face.
  • One (1) on-premise sign, either freestanding or attached, in connection with any residential building in any zoning district, for permitted professional offices or home occupations, not exceeding two (2) square feet and set back at least ten (10) feet from the highway right-of-way. Such sign shall state name and vocation only.
  • Number and name plates identifying residents, mounted on house, apartment or mailbox, not exceeding one (1) square foot in area.
  • Lawn signs identifying residents, not exceeding one (1) square foot, or two (2) square feet if double-faced. Such signs are to be nonilluminated except by a light which is an integral part of a lamp post if used as a support, with no advertising message thereon.
  • Private-owner merchandise sale signs for garage sales and auctions, not exceeding four (4) square feet for a period not exceeding four (4) days.
  • Temporary nonilluminated 'For Sale,' 'For Rent,' real estate signs and signs of similar nature, concerning the premises upon which the sign is located. In a residential zoning district, one (1) sign not exceeding four (4) square feet per side. In a business or industrial zoning district, one (1) sign not exceeding fifty (50) square feet set back at least fifteen (15) feet from all property lines. All such signs shall be removed within three (3) days after the sale, lease or rental of the premises.
  • At gasoline stations: Price signs on gasoline pumps.
  • One (1) sign, not exceeding six (6) square feet in the residential district nor sixteen (16) square feet in the business district, listing the architect, engineer, contractor and/or owner, on the premises where construction, renovation or repair is in progress.
  • Political posters, banners, promotional devices and similar signs, not exceeding four (4) square feet in the residential districts nor sixteen (16) square feet in the business districts, providing: Placement shall not exceed thirty (30) days, and a period of eleven (11) months shall elapse between the last day of one period of showing and the first day of the next. The names and addresses of the sponsor and the person responsible for removal are identified.

Sign Plan & Submission Notes for Bellport

  • No person shall erect, alter or relocate any sign without first obtaining a permit from the building inspector; permit application must include location to scale, elevations, illumination, materials, colors, and content.
  • Subsequent repainting or repair of an existing sign does not require a permit.
  • An application for a sign permit must be made to the building inspector, who will review for compliance with the local law before issuance.
  • Certain exempt sign types (listed in Section 21-483(a)) do not require a permit.
  • Any aggrieved person may appeal a decision of the building inspector to the board of appeals; appeals for variances must meet specific criteria per Section 21-487.
  • Sandwich board signs require an application on a form approved by the village board and a permit issued by the village clerk.

Source: municode municipal code