Questions? Call us at (262) 218-2915

Sign Regulations in Kenmore, New York

Kenmore, New York has specific sign regulations covering 22 sign types across 4 zoning districts. Regulated sign types include Pole Sign, Ground Sign, Animated Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Kenmore, New York

Sample Sign Requirements in Kenmore

Sign TypeMax Area
Building Sign2 sq ft
Ground Sign2 sq ft
Ground Sign (Institutional Use)20 sq ft

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for KenmoreFull Coverage

Sign Types Covered

22

  • Pole Sign
  • Ground Sign
  • Animated Sign
  • Building Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Kenmore

City WebsiteMunicipal Code3 permit application links available

Kenmore, New York Sign Rules at a Glance

Kenmore, New York regulates 22 sign types across 4 zoning districts. Pole Signs in the General Business District, Industrial District are capped at 20 ft tall and 50 sq ft, set back at least 2 ft from any property line (Sec. 25-231(2)). Most commercial signs in Kenmore require a permit.

Detailed Sign Ordinance Requirements for Kenmore, New York

Sign Rules by Zoning District in Kenmore (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
General Regulations For All Zones2Not listedNot listed
Residential District (R-1, R-2, R-3)9Not listed30 sq ft
Restricted Business Use District (RB)108 ft32 sq ft
General Business District, Industrial District320 ft50 sq ft

Zone-by-Zone Sign Requirements in Kenmore(sample of 3 of 4 zones)

Residential District (R-1, R-2, R-3)

Sign TypeMax AreaSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Building Sign2 sq ft1 per residenceNot listedUnlockSec. 25-229(a)(1)
Ground Sign2 sq ft1 per residenceNot listedUnlockSec. 25-229(a)(2)
Ground Sign (Institutional Use)20 sq ft1 per lotNot listedUnlockSec. 25-229(a)(3)
Wall Sign (Institutional Use)30 sq ft1 per lotNot listedUnlockSec. 25-229(a)(3)
FlagNot listedNot listedNot listedUnlockSec. 25-229(a)(4)
Political SignNot listedNot listedNot listedUnlockSec. 25-229(a)(5)
Real Estate SignNot listedNot listedNot listedUnlockSec. 25-229(a)(6)
Window Sign (Non-commercial)Not listedNot listedWindowUnlockSec. 25-229(a)(7)

Restricted Business Use District (RB)

Sign TypeMax HeightMax AreaSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign8 ft20 sq ft1 per lotFront of lotUnlockSec. 25-230(2)
Monument Sign8 ft20 sq ft1 per lotFront of lotUnlockSec. 25-230(2)
Wall Sign (Front of Building)Not listedNot listed1 per side of building facing streetFront of buildingUnlockSec. 25-230(3)
Wall Sign (Rear/Other Walls Not Facing Delaware Ave)Not listed15 sq ft1 per wallPart of building not fronting on Delaware AveUnlockSec. 25-230(11)
Awning SignNot listedNot listed1 per buildingFront of building, attached to awningUnlockSec. 25-230(4)
Projecting Sign (Front of Building)Not listed15 sq ft1 per buildingFront of buildingUnlockSec. 25-230(5)
Portable SignNot listed16 sq ft1 per lotWithin frontage of building, not in right-of-wayUnlockSec. 25-230(5)
Temporary Banner or Temporary Illuminated Portable Sign (New Business/Replacement)Not listed32 sq ft1 per buildingNext to building if illuminatedUnlockSec. 25-230(6)

General Business District, Industrial District

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Pole Sign20 ft50 sq ftAt least 2 ft from any property line1 per tax parcelNot listedUnlockSec. 25-231(2)
Wall Sign (Front of Building, 40 ft setback)Not listedNot listedAt least 40 ft from street curb1 per businessFront of buildingUnlockSec. 25-231(3)
Wall Sign (Rear/Other Walls Not Fronting Elmwood Ave, Kenmore Ave, or Military Rd)Not listed15 sq ftNot listed1 per wallNot fronting on Elmwood Ave, Kenmore Ave, or Military RdUnlockSec. 25-231(4)

PermitPal covers all 4 zoning districts in Kenmore. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Kenmore

  • No sign may be erected, placed, established, painted, created or maintained in the village except in conformance with the standards, procedures, exemptions and other requirements of this chapter.
  • Except as otherwise provided herein, no person or entity may erect, construct, enlarge, move or convert any sign in the village without first obtaining a permit pursuant to section 25-228 of this article.
  • Animated signs are not permitted in any district.
  • If a nonconforming sign is removed, other than for temporary repair or maintenance, it shall be replaced only with a sign that conforms to the requirements of this article.
  • An abandoned sign shall be removed by the owner or occupier of the property on which it stands within three (3) months after its abandonment.
  • No owner or occupier of property shall permit a dangerous or defective sign to remain on such property owned or occupied.
  • Every sign shall be designed and placed in such manner as to: not impair public safety; not restrict clear vision between a sidewalk and street; not be confused with any traffic signal or sign; not prevent free ingress to or egress from any door, window or fire escape; and not impede pedestrian or vehicular traffic.
  • Pole signs are not allowed in the village except as specifically authorized in the general business district and in the industrial district.

Exempt Signs in Kenmore

  • A public notice or warning required by a valid and applicable federal, state, or local law, regulation, rule or ordinance.
  • A sign inside a building that is not attached to a door or window and not visible from a distance of more than three (3) feet beyond the lot line of the zone lot or parcel on which the sign is located.
  • A state inspection station identification sign or state authorized repair shop identification sign which is located on an exterior or interior wall of a motor vehicle service or repair station.
  • Holiday lights or decorations with no commercial message that are erected not more than thirty (30) days before the holiday. Such lights or signs must be removed no more than thirty (30) days after the holiday.
  • Traffic control signs on private property which meet state department of transportation standards and which contain no commercial message.
  • Real estate signs.
  • Signs stating the hours of operation of a business or that it is closed or open that do not exceed two (2) square feet in surface area.
  • Information signs, memorial signs, building signs which do not exceed two (2) square feet in surface area.
  • Signs identifying the address of a building or residence.

Sign Plan & Submission Notes for Kenmore

  • The planning board is authorized to promulgate sign design guidelines, which provide guidance but do not override the chapter's requirements.
  • Applications for sign incentives (increased maximum sign area) in restricted use business, general business, or industrial districts are reviewed and approved by the planning board at the time of sign application.
  • Applications for most sign permits (other than for temporary signs) require planning board review before approval is recommended.
  • Applications for window signs exceeding 25% of the window area require both planning board recommendation and board of trustees approval, considering specific design guidelines and community character factors.
  • For mural installation, an application with a detailed site plan is required and is forwarded to the planning board for review and recommendation; the planning board must determine compliance and may recommend modifications before a permit is issued.
  • Applicants may appeal planning board determinations to the board of trustees (for murals) or the zoning board of appeals in case of sign permit violations.

Source: municode municipal code

Frequently Asked Questions

In Kenmore, the height limit for Pole Sign in the General Business District, Industrial District is 20 ft (Sec. 25-231(2)). Maximum sign heights range from 8 ft to 20 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Kenmore require a permit. From the submission notes on this page: Applications for sign incentives (increased maximum sign area) in restricted use business, general business, or industrial districts are reviewed and approved by the planning board at the time of sign application. Run a code check for an exact address to see the permit requirements for that zone.

Kenmore's sign code covers 22 sign types, including Pole Sign, Ground Sign, Animated Sign, and Building Sign. Most commercial signs need a permit. The ordinance lists 9 exemptions. One of them: Real estate signs. The full list is on this page.

In Kenmore, Pole Sign in the General Business District, Industrial District must be set back at least 2 ft from any property line (Sec. 25-231(2)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Kenmore's sign ordinance that cover digital, changing, or flashing signs: Animated signs are not permitted in any district. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Kenmore Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Kenmore, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds