Questions? Call us at (262) 218-2915

Sign Regulations in Kent Town, New York

Kent Town, New York has specific sign regulations covering 7 sign types across 3 zoning districts. Regulated sign types include Wall Sign, Freestanding Sign, Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Kent Town, New York

Sample Sign Requirements in Kent Town

Sign TypeMax HeightMax AreaSetback
Wall SignNo higher than the height of the wall to which it is attachedNot listedNot listed
Freestanding Sign6 ft above finished grade8 sq ft per side10 ft from highway right-of-way or 35 ft from highway center line, whichever is greater.
Projecting SignNot listedSee formulaNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Kent TownFull Coverage

Sign Types Covered

7

  • Wall Sign
  • Freestanding Sign
  • Projecting Sign
  • Sandwich Board Sign
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Kent Town

Municipal Code1 permit application link available

Frequently Asked Questions

In Kent Town, the height limit for Freestanding Sign (Shopping Center) in the Commercial District, IOC District is 15 ft above finished grade (Sec. 77-37A(5)(a)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Kent Town require a permit. From the submission notes on this page: Every application for a sign permit must be accompanied by plans to scale showing the dimensions and area of the sign; location; colors; materials; lettering, artwork and other attributes; method of illumination; and compliance statements. Run a code check for an exact address to see the permit requirements for that zone.

Kent Town's sign code covers 7 sign types, including Wall Sign, Freestanding Sign, Projecting Sign, and Sandwich Board Sign. Most commercial signs need a permit. The ordinance lists 14 exemptions. One of them: Flags and insignia of any government. The full list is on this page.

This page doesn't list a single setback distance for signs in Kent Town. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Kent Town's sign ordinance that cover digital, changing, or flashing signs: No sign shall be illuminated by or contain flashing, intermittent, rotating or moving lights except to show time, date and/or temperature. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Kent Town Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Kent Town, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Kent Town, New York Sign Rules at a Glance

Kent Town, New York regulates 7 sign types across 3 zoning districts. Freestanding Signs in the R-80, R-40, R-10, PRD District are capped at 6 ft above finished grade and 8 sq ft per side (Sec. 77-36A(2)). Most commercial signs in Kent Town require a permit.

Detailed Sign Ordinance Requirements for Kent Town, New York

Sign Rules by Zoning District in Kent Town (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones3No higher than the height of the wall to which it is attachedNot listedNot listed
R-80, R-40, R-10, PRD District26 ft above finished grade8 sq ft per sideNot listed
Commercial District, IOC District715 ft above finished grade64 sq ft per sideNot listed

Zone-by-Zone Sign Requirements in Kent Town

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNo higher than the height of the wall to which it is attachedNot listedNot listedNot listedNot listedAttached to building wallNot listedUnlock§ 77-35B(1)-(2), § 77-35B(5), § 77-35B(13)
Freestanding SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§ 77-35B(1)-(2), (5)-(9), (15)
Projecting SignNot listedNot listedNot listedNot listedNot listedAbove first-story windows, below second-story windowsills (multistory); above first-story windows, below roofline (one-story)Not listedUnlock§ 77-35B(11)-(12), (14)

R-80, R-40, R-10, PRD District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNo higher than the wall to which it is attached6 sq ftNot listedNot listed1 per nonresidential premisesNonresidential premises, mounted on buildingNot listedUnlock§ 77-36A(1)-(2)
Freestanding Sign6 ft above finished grade8 sq ft per sideNot listed10 ft from highway right-of-way or 35 ft from highway center line, whichever is greater.1 per nonresidential premisesNonresidential premisesNot listedUnlock§ 77-36A(2)

Commercial District, IOC District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listedSee formulaNot listedNot listed1 per tenantPer tenant, affixed to buildingNot listedUnlock§ 77-37A(2)
Projecting SignNot listedSee formulaNot listedNot listed1 per tenant (combined with wall sign)Affixed to buildingNot listedUnlock§ 77-37A(2)
Freestanding Sign8 ft above finished grade20 sq ft per sideNot listed10 ft from highway right-of-way or 35 ft from highway center line, whichever is greater.1 per useOn siteNot listedUnlock§ 77-37A(2)
Sandwich Board SignNot listed5 sq ft per sideNot listedNot listed1 per tenantPlaced so as to not block or impede trafficNot listedUnlock§ 77-37A(3)
Menu Board (Drive-through)Not listed20 sq ftNot listedNot listed1 per tenantDrive-throughNot listedUnlock§ 77-37A(4)
Freestanding Sign (Shopping Center)15 ft above finished grade64 sq ft per sideNot listed15 ft from highway right-of-way or 40 ft from center line, at least 15 ft from any property line.1 per shopping centerShopping center entrance or as approvedNot listedUnlock§ 77-37A(5)(a)
Wall Sign (Shopping Center Tenant)Not listed10% of facade area or 20 sq ft (whichever is less)Not listedNot listed1 per tenantBuilding facade for tenantNot listedUnlock§ 77-37A(5)(b)

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Kent Town with a free PermitPal account.

Run a free code check

Prohibited Signs in Kent Town

  • No person, firm or corporation shall hereafter erect, re-erect, construct or structurally alter a sign or sign structure without first receiving the approval of the Town Planning Board and obtaining a permit issued by the Building Inspector.
  • No sign shall be erected which, in the opinion of the Building Inspector or Zoning Administrator, may cause hazardous or unsafe conditions.
  • No sign, other than an official traffic sign, shall be erected within the right-of-way of any public street or highway.
  • Unless otherwise provided for in this section, no sign shall have more than two sides.
  • All illuminated signs must bear the Underwriters Laboratories, Inc., seal or be inspected and certified by a Putnam County authorized electrical inspection company.
  • All freestanding signs shall be designed and constructed to withstand a wind pressure of not less than 30 pounds per square foot of surface area.
  • All signs, including wall signs and projecting signs, shall be securely anchored and shall not swing or move in any manner.
  • All signs shall be constructed of durable materials and shall be maintained in a good condition. The use of cardboard, paper, canvas or similar impermanent material is prohibited.
  • Except for the Commercial District and IOC District, no sign shall project over public sidewalk areas.
  • Projecting signs where permitted must have no more than two faces, may not extend more than five feet from the building or 1/3 of the sidewalk width, and must have specific clearances above sidewalks.
  • No sign shall project from an awning.
  • No wall sign shall be higher than the height of the wall to which it is attached.
  • Illumination of any sign shall not produce a direct glare beyond the limits of the boundary of the lot. Ground-mounted spotlights must be fully shielded.
  • All wiring to a freestanding sign shall be underground and/or concealed within the sign structure.
  • Any sign destroyed or deteriorated beyond repair, as determined by the Building Inspector, shall be promptly removed.
  • No off-premises signs shall be allowed other than as permitted for agricultural premises and as stated in the exempt signs provisions.
  • No sign shall be illuminated by or contain flashing, intermittent, rotating or moving lights except to show time, date and/or temperature.
  • No sign shall contain any moving parts.
  • No sign shall be mounted on the roof of any building or structure.
  • Portable signs are prohibited except as provided herein.
  • Nonconforming signs may not be enlarged, altered, or replaced unless brought into conformity with the code; any nonconforming sign that is damaged or destroyed for a loss of 50% or more of its value may not be restored except as conforming.

Exempt Signs in Kent Town

  • Decorative banners, flags, posters, placards and streamers on residential premises.
  • Historical markers, tablets and statues, memorial signs and plaques; names of buildings and dates of erection when permanently affixed or constructed from durable materials; and emblems installed by governmental agencies, religious or nonprofit organizations, not exceeding six square feet.
  • Flags and insignia of any government.
  • Notification signs on communication facilities required by law.
  • On-premises directional signs for the convenience of the general public, identifying public parking areas, fire zone, entrances and exits not exceeding four square feet per face and six feet in height. Business names and personal names allowed for directional purposes only.
  • Number and name plates identifying residences mounted on the house, building, apartment or mailbox, not exceeding two square feet in area.
  • Lawn signs identifying residences, not exceeding one square foot, non-illuminated except by a lamppost as support.
  • Private owner merchandise sale signs for garage sales and auctions located on the premises, not exceeding four square feet.
  • On-premises "No Trespassing" or "Private Property" or similar signs.
  • Temporary nonilluminated real estate signs and signs of similar nature concerning sale, rental, availability of property, subject to size and removal conditions.
  • Temporary, nonilluminated window signs and posters not exceeding 35% of the total window surface of a building.
  • Temporary informational and directional signs for noncommercial events, meetings, conventions, and other assemblies, displayed not more than one week prior to the event and removed after.
  • One sign listing architect, engineer, contractor and/or owner on premises where construction, renovation or repair is in progress, subject to size and removal conditions.
  • Political posters, noncommercial, and similar signs as long as not placed within the right-of-way of any street or highway.

Sign Plan & Submission Notes for Kent Town

  • Every application for a sign permit must be accompanied by plans to scale showing the dimensions and area of the sign; location; colors; materials; lettering, artwork and other attributes; method of illumination; and compliance statements.
  • Signs in residential districts (R-80, R-40, R-10, PRD) must be designed in accordance with an overall comprehensive signage plan appropriate to dimension and architectural appearance.
  • Signs in Commercial and IOC Districts must be designed in accordance with an overall comprehensive signage plan, presented as a unified plan integrated with building and landscaping, and subject to Planning Board review and approval.
  • Multiple tenant signage in nonresidential districts requires a unified signage plan integrated with overall building design and subject to Planning Board review.
  • Shopping center and shopping mall signage, as well as drive-through menu boards and sandwich board signs, are subject to Planning Board review and approval.

Source: ecode360 municipal code