Questions? Call us at (262) 218-2915

Sign Regulations in Port Chester, New York

Port Chester, New York has specific sign regulations covering 28 sign types across 4 zoning districts. Regulated sign types include Address Sign, Sidewalk Sign, Plaque Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Port Chester, New York

Sample Sign Requirements in Port Chester

Sign TypeMax HeightMax AreaSetback
Address SignNot listed2 square feetNot listed
Plaque Sign (Home Occupation Only)7 feet (mounting height maximum), 2 feet (sign height maximum)1 square footNot listed
Awning Sign (Street-Facing Principal Buildings)Not specified for sign; Valance height maximum 12 inches70% of valance areaNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Port ChesterFull Coverage

Sign Types Covered

28

  • Address Sign
  • Sidewalk Sign
  • Plaque Sign
  • Plaque Sign (Home Occupation Only)
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Port Chester

Municipal Code1 permit application link available

Frequently Asked Questions

In Port Chester, the height limit for Plaque Sign (Home Occupation Only) in the CD-3, CD-3.R20, CD-3.R5, CD-3.R7, SD-PRD zoning districts is 7 feet (mounting height maximum), 2 feet (sign height maximum). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Port Chester require a permit. From the submission notes on this page: Each application for a sign permit shall be accompanied by a fully dimensioned sign plan that reflects compliance with all applicable standards and requirements. Run a code check for an exact address to see the permit requirements for that zone.

Port Chester's sign code covers 28 sign types, including Address Sign, Sidewalk Sign, Plaque Sign, and Plaque Sign (Home Occupation Only). Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: Temporary signs allowed under § 345-701G. The full list is on this page.

We haven't published Port Chester's sign setback rules on this page yet. Run a code check for an exact address to see them.

Rules in Port Chester's sign ordinance that cover digital, changing, or flashing signs: No sign may be illuminated with or include animated, moving, intermittent, or flashing lights, or other active lighting. No sign may have changeable copy except for a marquee sign with physically changeable letters, an outdoor display case with removable printed items, or an electronic message board allowed pursuant to § 345-701I. Moving or animated signs are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Port Chester Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Port Chester, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Port Chester, New York Sign Rules at a Glance

Port Chester, New York regulates 28 sign types across 4 zoning districts. Sidewalk Signs in the CD-4 zoning district are capped at 48 inches tall, 10 square feet, and 30 inches wide. Most commercial signs in Port Chester require a permit.

Detailed Sign Ordinance Requirements for Port Chester, New York

Sign Rules by Zoning District in Port Chester (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
CD-3, CD-3.R20, CD-3.R5, CD-3.R7, SD-PRD27 feet (mounting height maximum), 2 feet (sign height maximum)2 square feetNot listed
CD-41348 inches70% of valance areaNot listed
CD-41, CD-5, CD-5W, CD-6, CD-6T, SD-PMU, CV1648 inches70% of valance areaNot listed
CD-3217 feet (mounting height maximum), 2 feet (sign height maximum)1 square footNot listed

Zone-by-Zone Sign Requirements in Port Chester(sample of 3 of 4 zones)

CD-3, CD-3.R20, CD-3.R5, CD-3.R7, SD-PRD

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Address SignNot listed2 square feetNot listedNot listed1 per addressMounted on the BuildingNot listedUnlock§345-701J(1), Table 345.701.B (B-1), §345-701F
Plaque Sign (Home Occupation Only)7 feet (mounting height maximum), 2 feet (sign height maximum)1 square foot18 inchesNot listed1 per Principal FrontageFlush with the building wall within 10 feet of an entranceNot listedUnlockTable 345.701.A, Table 345.701.B (B-10)

CD-4

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Awning Sign (Street-Facing Principal Buildings)Not specified for sign; Valance height maximum 12 inches70% of valance areaWidth of FacadeNot listed1 per windowOn valance of street-facing building awningsNot listedUnlockTable 345.701.A, Table 345.701.B (B-2)
Band Sign (Street-Facing Principal Buildings)3 feet1.5 square feet per linear foot of FacadeWidth of Facade (max 100%)Not listed1 per Facade plus 1 per first floor business FrontageAbove main entrance, horizontally along entablatureNot listedUnlockTable 345.701.A, Table 345.701.B (B-3)
Blade Sign (Street-Facing Principal Buildings)4 feet (sign panel); Clearance minimum 8 feet above sidewalk8 square feet2 feetNot listed1 per businessPerpendicular to facade on first floorNot listedUnlockTable 345.701.A, Table 345.701.B (B-4)
Directory Sign (Street-Facing Principal Buildings)3 feet6 square feet2 feetNot listed1 per ground floor entrance to upper floor business(es)Attached to and parallel with the first floor FacadeNot listedUnlockTable 345.701.A, Table 345.701.B (B-5)
Plaque Sign (Street-Facing Principal Buildings)7 feet (mounting height maximum), 2 feet (sign height maximum)1 square foot18 inchesNot listed1 per Principal FrontagePanel or individual letters inset/applied flush with building wall within 10 feet of entranceNot listedUnlockTable 345.701.A, Table 345.701.B (B-10)
Porch Sign (Street-Facing Principal Buildings)2 feet6 square feetWidth of entranceNot listed1 per address (2 for Corner Building)Mounted on porch, parallel to FacadeNot listedUnlockTable 345.701.A, Table 345.701.B (B-11)
Post Sign (Street-Facing Principal Buildings)6 feet (apex)12 square feet48 inches (sign panel)Not listed1 per BuildingMounted on 1 or 2 posts in the First Lot LayerNot listedUnlockTable 345.701.A, Table 345.701.B (B-12)
Sidewalk Sign48 inches10 square feet30 inchesNot listed1 per businessAt the entrance to a Building in pedestrian environmentNot listedUnlockTable 345.701.A, Table 345.701.B (B-13)

CD-41, CD-5, CD-5W, CD-6, CD-6T, SD-PMU, CV

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Awning SignValance height maximum 12 inches70% of valance areaWidth of FacadeNot listed1 per windowOn valance of building awningsNot listedUnlockTable 345.701.A, Table 345.701.B (B-2)
Band Sign3 feet1.5 square feet per linear foot of FacadeWidth of Facade (max 100%)Not listed1 per Facade plus 1 per first floor business FrontageAbove main entrance, horizontally along entablatureNot listedUnlockTable 345.701.A, Table 345.701.B (B-3)
Blade Sign4 feet (sign panel); Clearance minimum 8 feet above sidewalk8 square feet2 feetNot listed1 per businessPerpendicular to facade on first floorNot listedUnlockTable 345.701.A, Table 345.701.B (B-4)
Directory Sign3 feet6 square feet2 feetNot listed1 per ground floor entrance to upper floor business(es)Attached to and parallel with the first floor FacadeNot listedUnlockTable 345.701.A, Table 345.701.B (B-5)
Plaque Sign7 feet (mounting height maximum), 2 feet (sign height maximum)1 square foot18 inchesNot listed1 per Principal FrontagePanel or individual letters inset/applied flush with building wall within 10 feet of entranceNot listedUnlockTable 345.701.A, Table 345.701.B (B-10)
Porch Sign2 feet6 square feetWidth of entranceNot listed1 per address (2 for Corner Building)Mounted on porch, parallel to FacadeNot listedUnlockTable 345.701.A, Table 345.701.B (B-11)
Post Sign6 feet (apex)12 square feet48 inches (sign panel)Not listed1 per BuildingMounted on 1 or 2 posts in the First Lot LayerNot listedUnlockTable 345.701.A, Table 345.701.B (B-12)
Sidewalk Sign48 inches10 square feet30 inchesNot listed1 per businessAt the entrance to a Building in pedestrian environmentNot listedUnlockTable 345.701.A, Table 345.701.B (B-13)

PermitPal covers all 4 zoning districts in Port Chester. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Port Chester

  • No sign may be illuminated with or include animated, moving, intermittent, or flashing lights, or other active lighting.
  • No sign or sign support may be affixed to a tree, rock, utility pole or other improper sign support, or contain any attachment, other sign, symbol, flag, pennant or other attention-getting device (other than the sign itself).
  • Billboards and off-premises signs are prohibited.
  • Portable signs other than sidewalk signs are not permitted.
  • Neon cabinet signs and projection signs are not permitted.
  • Signs in upper floor windows are not permitted, except for window signs for an occupant that is separate from the occupant of the ground floor.
  • All signs must comply with all applicable provisions of the Building Code and/or Village Code Chapter 151, Building Code Administration and Enforcement.
  • Except as expressly allowed, signs are not permitted in public rights-of-way.
  • No sign may have any moving component or element.
  • No sign may have changeable copy except for a marquee sign with physically changeable letters, an outdoor display case with removable printed items, or an electronic message board allowed pursuant to § 345-701I.
  • No sign may, by design or arrangement, imitate the size, color, lettering, illumination, word, phrase, or symbol of a sign used as traffic safety control sign.
  • No sign may obstruct a traffic-control device, traffic sign, or street name sign, block the vision of drivers at any driveway, street intersection or crosswalk, or be unsafe or constitute a hazard of any type.
  • Where a lot adjoins another lot, no freestanding sign shall be permitted within a triangle formed by the side lot line, the front lot line and a line beginning on the side lot line at the required front setback distance and extended at 45° to the front lot line for an existing building.
  • No sign may be within or overhang a public right-of-way other than a wall sign that does not overhang such right-of-way more than 15 inches, a blade sign, a vertical projecting sign, a marquee sign, or an awning sign.
  • Signs in parks are forbidden.
  • Moving or animated signs are prohibited.
  • Intermittent or flashing lights shall not be used on or in any sign.
  • Shopping plaza signage exceptions: No interior sign may be erected or maintained in the window of a building which is visible from outside except as specified.

Exempt Signs in Port Chester

  • Address sign: one address sign per tenant or owner.
  • On-premises signs not exceeding three square feet in area that are located along the route to a place or location within such premises or are provided for safety.
  • Signs placed by the village or any other governmental unit with jurisdiction over the area where the sign is placed.
  • Signs carved into stone, concrete or similar material or made of bronze, aluminum, or other permanent construction and made an integral part of the structure.
  • Temporary signs allowed under § 345-701G.

Sign Plan & Submission Notes for Port Chester

  • Except for exempt signs, no sign shall be erected on a lot, installed or placed on a building, or otherwise exist on a lot or building unless a sign permit has been issued.
  • Each application for a sign permit shall be accompanied by a fully dimensioned sign plan that reflects compliance with all applicable standards and requirements.
  • Design drawings of any proposed sign must be submitted to the Planning and Economic Development Zoning Administrator for review of compliance with this section prior to fabrication and installation.
  • Upon receipt of an application for a sign permit, the building inspector may at his or her discretion forward to the Planning and Economic Development Zoning Administrator a copy thereof and copies of all accompanying materials, including without limitation the sign plan.
  • The Planning and Economic Development Zoning Administrator shall review such application, sign plan, and other materials to determine whether the proposed sign complies.
  • If the Planning and Economic Development Zoning Administrator determines the application, sign plan, and other materials comply, a Certificate of Compliance shall be issued.
  • A sign permit shall be issued by the building inspector if and only if the sign plan and other materials accompanying the application conform to the applicable requirements.
  • The applicant may choose to include the location of a sign within its site plan application or development parcel plan, but still must file a sign permit application after any site plan or development parcel plan approval.
  • All informational signs, prior to their installation, and any changes made to the informational signs during the term of the license must be approved by the Police Chief or his designee.

Source: ecode360 municipal code