Sign Regulations in Pleasantville, New York
Pleasantville, New York has specific sign regulations covering 18 sign types across 3 zoning districts. Regulated sign types include Residential Sign, Residential Development Identification Sign, Building Marker. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 28, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Pleasantville, New York
Sample Sign Requirements in Pleasantville
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Residential Sign | Not listed | As specified in Schedule I, Note 1: Residential lots are limited to maximum aggregate sign area per lot. | Behind lot line, not to interfere with driver vision/intersections. |
| Residential Development Identification Sign | Not listed | As regulated by Schedule I: 1 sign per entrance to subdivision of 10+ lots or multiple dwellings of 10+ units. | Behind lot line |
| Wall Sign | Shall not project above top of building wall or beyond ends of wall (see §148-10A(3)). | See Schedule II, Note 1. Typically determined as maximum area per foot of building frontage. | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
18
- Residential Sign
- Residential Development Identification Sign
- Building Marker
- Wall Sign
- +2 more types
Zoning Districts
3
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Pleasantville
Other Cities in New York
Frequently Asked Questions
This page doesn't give a single height number for signs in Pleasantville. The tables on this page quote the ordinance's height rules for the sign types we sampled. For example, the height rule for Wall Sign in the Nonresidential District and other zoning districts reads: Shall not project above top of building wall or beyond ends of wall (see §148-10A(3)). Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Pleasantville require a permit. From the submission notes on this page: A sign plan, showing the location of all existing and proposed signs, is required as part of the application for approval of a comprehensive signage plan or sign permit for all other signs (other than interim signs). Run a code check for an exact address to see the permit requirements for that zone.
Pleasantville's sign code covers 18 sign types, including Residential Sign, Residential Development Identification Sign, Building Marker, and Wall Sign. Most commercial signs need a permit. The ordinance lists 11 exemptions. One of them: Public signs erected by or on behalf of a governmental body. The full list is on this page.
This page doesn't list a single setback distance for signs in Pleasantville. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.
Rules in Pleasantville's sign ordinance that cover digital, changing, or flashing signs: Animated signs are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Pleasantville Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Pleasantville, New York, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Pleasantville, New York Sign Rules at a Glance
Pleasantville, New York regulates 18 sign types across 3 zoning districts. Real Estate Signs (Exempt) are capped at 5 square feet per sign (Sec. 148-6H). Most commercial signs in Pleasantville require a permit.
Detailed Sign Ordinance Requirements for Pleasantville, New York
Sign Rules by Zoning District in Pleasantville (3 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential District, R-PO, RO-2, PUD | 3 | Not listed | As specified in Schedule I, Note 1: Residential lots are limited to maximum aggregate sign area per lot. | Not listed |
| Nonresidential District, C-O, Business and Manufacturing Districts, R-PO, RO-2 (for nonresidential principal uses) | 9 | Shall not project above top of building wall or beyond ends of wall (see §148-10A(3)). | Covers not more than 25% of glass area or maximum aggregate sign area specified in Schedule II, Note 1 (whichever is less). | Not listed |
| General Regulations For All Zones | 6 | Not listed | Maximum 25 sq ft aggregate all flags per property | Not listed |
Zone-by-Zone Sign Requirements in Pleasantville
Residential District, R-PO, RO-2, PUD
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Residential Sign | Not listed | As specified in Schedule I, Note 1: Residential lots are limited to maximum aggregate sign area per lot. | Not listed | Behind lot line, not to interfere with driver vision/intersections. | Not listed | On residential lots, behind lot line. | Not listed | Unlock | §148-4B [RESIDENTIAL SIGN] and §148-8A |
| Residential Development Identification Sign | Not listed | As regulated by Schedule I: 1 sign per entrance to subdivision of 10+ lots or multiple dwellings of 10+ units. | Not listed | Behind lot line | Typically 1 per entrance | At entrance to subdivision or development. | Not listed | Unlock | §148-4B [RESIDENTIAL DEVELOPMENT IDENTIFICATION SIGN] and §148-8A |
| Building Marker | Not listed | Not listed | Not listed | Not listed | Not listed | Attached to building | Not listed | Unlock | §148-4B [BUILDING MARKER] |
Nonresidential District, C-O, Business and Manufacturing Districts, R-PO, RO-2 (for nonresidential principal uses)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | Shall not project above top of building wall or beyond ends of wall (see §148-10A(3)). | See Schedule II, Note 1. Typically determined as maximum area per foot of building frontage. | Not listed | Not listed | See Schedule II | Parallel to and within 8 inches of wall, not above roof or wall ends. | Not listed | Unlock | §148-4B [WALL SIGN] and §148-8B, §148-10, §148-10.1 |
| Freestanding Sign | Must be approved by Planning Commission as to height for traffic/safety (§148-12C, §148-13G(2)) | See Schedule II, Note 1. Typically maximum area per street frontage. | Not listed | Behind lot line, not to interfere with vision at driveways/intersections. | See Schedule II | On private property, not interfering with site lines. Cannot overhang right-of-way. | Not listed | Unlock | §148-4B [FREESTANDING SIGN], §148-8B, §148-10 |
| Projecting Sign | Not listed | See Schedule II | Not listed | Not listed | See Schedule II | Attached to building/wall | Not listed | Unlock | §148-4B [PROJECTING SIGN] |
| Window Sign | Not listed | Covers not more than 25% of glass area or maximum aggregate sign area specified in Schedule II, Note 1 (whichever is less). | Not listed | Not listed | 25% glass area or sign area maximum | Interior window or door | Not listed | Unlock | §148-4B [WINDOW SIGN], §148-10B(2) |
| Temporary Sign | Not listed | Up to 25% of glass area or maximum aggregate sign area in Schedule II, Note 1. | Not listed | Not listed | As permitted by aggregate area | Interior window/door | Not listed | Unlock | §148-4B [TEMPORARY SIGN] |
| Interim Sign | Not listed | See Schedule II. Must be in compliance with underlying sign type. | Not listed | As for permanent sign type | As permitted for sign type | Can be building or freestanding sign. | Not listed | Unlock | §148-4B [INTERIM SIGN], §148-13F |
| Awning/Canopy Sign | Not listed | See Schedule II | Not listed | Not listed | See Schedule II | On canopy/awning, parallel or perpendicular, vertical face. | Not listed | Unlock | §148-4B [CANOPY SIGN], §148-8B |
| Nonresidential Development Identification Sign | Not listed | See Schedule II | Not listed | Behind lot line | See Schedule II | At nonresidential use site | Not listed | Unlock | §148-4B [NONRESIDENTIAL DEVELOPMENT IDENTIFICATION SIGN] |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Real Estate Sign (Exempt) | Not listed | 5 square feet per sign | Not listed | Behind lot line | 1 per street frontage | Behind lot line, not interfering with driveway/intersection vision. | Not listed | Unlock | §148-6H |
| Contractor's Identification Sign (Exempt) | Not listed | 5 square feet per sign, 15 square feet total aggregate on property | Not listed | Behind lot line | 1 per contractor; 15 sq ft max aggregate | Behind lot line | Not listed | Unlock | §148-6I |
| Flag (Exempt) | Not listed | Maximum 25 sq ft aggregate all flags per property | Not listed | Behind lot line | Not listed | Behind lot line. | Not listed | Unlock | §148-6J |
| Property Identification Sign (Exempt) | Not listed | 1 sq ft per sign | Lettering/numeral maximum 6 inches height/width | Behind lot line | 2 | Behind lot line, visible to the street. | Not listed | Unlock | §148-6G |
| Prohibition Sign (No Trespassing, Hunting, Fishing) (Exempt) | Not listed | 1 sq ft | Not listed | Not listed | Not listed | Private property | Not listed | Unlock | §148-6K |
| Holiday Lights/Decorations (Exempt) | Not listed | Not listed | Not listed | Not listed | Not listed | Behind lot line | Not listed | Unlock | §148-6F |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Pleasantville with a free PermitPal account.
Run a free code checkProhibited Signs in Pleasantville
- All signs not expressly permitted or exempt under the chapter are prohibited.
- Pennants are prohibited.
- Portable signs are prohibited.
- Roof signs are prohibited.
- Suspended signs attached to an awning or marquee are prohibited.
- Animated signs are prohibited.
- Beacons are prohibited.
- Strings of lights not permanently mounted to a rigid background are prohibited, except exempt holiday lights.
- Signs hanging or projecting over, or placed upon, public rights-of-way are prohibited, except as specifically authorized by the Board of Trustees per Chapter 98.
- Signs affixed or attached to trees or rocks, public utility poles or Village signage/directional poles are prohibited.
Exempt Signs in Pleasantville
- Public notices or warnings required by applicable federal, state, Village or school district law, regulation or ordinance.
- Public signs erected by or on behalf of a governmental body.
- Informational signs of a public utility regarding its poles, lines, pipes or facilities.
- Signs erected by or on behalf of a public transit company to identify bus stops, train stations, and related route and schedule information.
- Any sign inside a building not attached to a window or door, or not located within four feet of a window or door.
- Holiday lights and decorations when displayed behind the lot line on private property.
- Not more than two property identification signs containing street address only, not exceeding specified dimensions and located behind the lot line.
- Not more than one real estate sign for each street frontage, subject to specified size, placement, removal, and illumination criteria.
- One contractor's identification sign per contractor, with area and placement limitations, and aggregate area requirements.
- Flags, not exceeding 25 square feet in aggregate, with no illumination and proper placement.
- Signs devoted to prohibiting trespass, hunting or fishing, not larger than one square foot and located on private property.
Sign Plan & Submission Notes for Pleasantville
- A comprehensive signage plan is required and must be approved by the Board of Architectural Review for any site with a building containing multiple nonresidential tenancies/units or multiple nonresidential buildings, unless an area signage plan applies.
- An area signage plan may be proposed by the Board of Architectural Review for a particular area composed of multiple properties, and can become the basis for an overlay zoning district with signage guidelines.
- A sign plan, showing the location of all existing and proposed signs, is required as part of the application for approval of a comprehensive signage plan or sign permit for all other signs (other than interim signs).
- Applications for new or relocated freestanding signs require simultaneous site plan approval by the Planning Commission.
Source: ecode360 municipal code