Questions? Call us at (262) 218-2915

Sign Regulations in Rome, New York

Rome, New York has specific sign regulations covering 34 sign types across 12 zoning districts. Regulated sign types include Building Entryway Sign, Construction Activity Sign (Individual Single-family or Two-family dwellings or site < 1 acre), Construction Activity Sign (Other sites). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Rome, New York

Sample Sign Requirements in Rome

Sign TypeMax HeightMax AreaSetback
Building Entryway Sign5 ft (freestanding)6 sq ft5 ft from lot line (freestanding)
Construction Activity Sign (Individual Single-family or Two-family dwellings or site < 1 acre)7 ft (freestanding)16 sq ft5 ft from lot line (freestanding)
Construction Activity Sign (Other sites)7 ft (freestanding)32 sq ft5 ft from lot line (freestanding)

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for RomeFull Coverage

Sign Types Covered

34

  • Building Entryway Sign
  • Construction Activity Sign (Individual Single-family or Two-family dwellings or site < 1 acre)
  • Construction Activity Sign (Other sites)
  • Flag
  • +2 more types

Zoning Districts

12

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Rome

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

In Rome, the height limit for Canopy Sign (Structural, Freestanding) in the Multi-family Dwellings and other zoning districts is 25 ft (Sec. 80-16.10(c)iii). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Rome require a permit. From the submission notes on this page: Sign permit applications for A-frame signs must include a placement plan showing the general location of the A-frame sign. Run a code check for an exact address to see the permit requirements for that zone.

Rome's sign code covers 34 sign types, including Building Entryway Sign, Construction Activity Sign (Individual Single-family or Two-family dwellings or site < 1 acre), Construction Activity Sign (Other sites), and Flag. Most commercial signs need a permit. The ordinance lists 7 exemptions. One of them: Changing the message of a changeable message sign or electronic message sign is exempt from sign permit requirements. The full list is on this page.

In Rome, Awning Sign in the Multi-family Dwellings and other zoning districts must be set back 2 ft from curb line minimum (Sec. 80-16.10(b)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Rome's sign ordinance that cover digital, changing, or flashing signs: Neon or LED lighting to outline doors and windows is prohibited. Flashing neon or LED lighting is prohibited. Changing the message of a changeable message sign or electronic message sign is exempt from sign permit requirements. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Rome Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Rome, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Rome, New York Sign Rules at a Glance

Rome, New York regulates 34 sign types across 12 zoning districts. Temporary Inflatable Signs in the C-2 (Temporary Inflatable Signs) zoning district are capped at 25 ft tall and 25 ft wide (Sec. 80-16.9). Most commercial signs in Rome require a permit.

Detailed Sign Ordinance Requirements for Rome, New York

Sign Rules by Zoning District in Rome (12 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones1735 ft or district height limit, whichever is less (freestanding pole)32 sq ftNot listed
Historic District1Not listedNot listedNot listed
Commercial Districts, WR, W, GB14 ft6 sq ft per sideNot listed
Multi-family Dwellings, Non-residential Districts, All Districts (for awning/canopy/wall/projection)725 ftVaries, min 40 sq ftNot listed
All Drive-through Facilities18 ft75 sq ftNot listed
C-2, GB, I (and non-residential in those districts), School/Government/Park/Cultural in any district1Not listed70% of total sign area (as wall, freestanding, or marquee sign)Not listed
Non-residential Uses (excluding multi-tenant retail centers)120 ft; 30 ft (for lots over 200 ft frontage & 2 acres)50 sq ft (one sign per street frontage); 200 sq ft (for lot over 200 ft frontage & 2 acres)Not listed
Non-residential Multi-tenant Retail Centers125 ft200 sq ftNot listed
Multi-family Dwellings16 ft32 sq ftNot listed
Residential Subdivisions16 ft100 sq ftNot listed
C-2, C-3, W, GB (Non-residential uses)1Not listedNot listedNot listed
C-2 (Temporary Inflatable Signs)125 ftAggregate lettering/advertising 150 sq ftNot listed

Zone-by-Zone Sign Requirements in Rome(sample of 3 of 12 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Building Entryway Sign5 ft (freestanding)6 sq ftNot listed5 ft from lot line (freestanding)1 per building entryWithin 10 ft of building entry, at entryway; 5 ft from any lot line (freestanding)Not listedUnlockSec. 80-16.7(c)(i)
Construction Activity Sign (Individual Single-family or Two-family dwellings or site < 1 acre)7 ft (freestanding)16 sq ftNot listed5 ft from lot line (freestanding)1 per street frontageOn site of construction; wall signs allowed on fenceNot listedUnlockSec. 80-16.7(c)(ii)
Construction Activity Sign (Other sites)7 ft (freestanding)32 sq ftNot listed5 ft from lot line (freestanding)1 per street frontageOn site of construction; wall signs allowed on fenceNot listedUnlockSec. 80-16.7(c)(ii)
Garage or Yard Sale Activity Sign5 ft (freestanding)6 sq ftNot listedWithin 5 ft from lot line (freestanding)1 per street frontageOn site of activity; may be freestanding, wall, or window signNot listedUnlockSec. 80-16.7(c)(iv)
Memorial Sign4 ft (freestanding)6 sq ftNot listed5 ft from lot line (freestanding)1 per street frontageAny district; may be wall or freestanding; 5 ft from lot line (freestanding)Not listedUnlockSec. 80-16.7(c)(vii)
Parking Lot Circulation Sign4 ft (freestanding)4 sq ftNot listed2 ft from lot line (freestanding)As neededEach entrance/exit, driveway intersection, drive-through lane, other circulation pointsNot listedUnlockSec. 80-16.7(c)(ix)a
Parking Lot Information Sign6 ft (freestanding)10 sq ftNot listed5 ft from lot line abutting street (freestanding)As neededAs needed for any parking lot; may be wall-mounted or freestanding; freestanding must be 5 ft from lot line abutting a streetNot listedUnlockSec. 80-16.7(c)(ix)b
Real Estate Activity Sign (Residential Districts)5 ft (freestanding)16 sq ftNot listedWithin 5 ft from lot line (freestanding)1 per street frontageOn site; may be freestanding, wall, or window; 1 per street frontageNot listedUnlockSec. 80-16.7(c)(x)

Multi-family Dwellings, Non-residential Districts, All Districts (for awning/canopy/wall/projection)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Awning SignNot listed30% of each awning surfaceNot listed2 ft from curb line minimumNot listedAttached to or above awning, may encroach into public right-of-way (at least 2 ft from curb)Not listedUnlockSec. 80-16.10(b)
Canopy Sign (Non-structural)Not listed30% of canopy surface areaNot listed2 ft from curb line minimumNot listedOn canopy, may encroach into public right-of-way (at least 2 ft from curb)Not listedUnlockSec. 80-16.10(c)ii
Canopy Sign (Structural, Building-attached)Not listed30% of facade area (per facade)Not listed2 ft from curb line minimumNot listedOn canopy facade; attached to principal structure; may encroach into public right-of-way (at least 2 ft from curb)Not listedUnlockSec. 80-16.10(c)iii
Canopy Sign (Structural, Freestanding)25 ft30% of each facade area (per facade)Not listedDistrict or 5 ft from lot line, whichever greaterNot listedFreestanding structure; subject to district setback or 5 ft from lot line, whichever greaterNot listedUnlockSec. 80-16.10(c)iii
Wall Sign (Single Tenant Structure)Not listedVaries, min 40 sq ftNot listedNot listedUnlimited per facade (subject to total sign area limit per formula)Affixed flat to wall (may encroach max 12" into right-of-way)Not listedUnlockSec. 80-16.10(i)
Wall Sign (Multi-Tenant Structure)Not listedVaries, min 40 sq ft per tenant's frontageNot listedNot listedUnlimited per eligible tenant's facade (subject to total sign area limit per formula)Affixed flat to wall along tenant's individual frontageNot listedUnlockSec. 80-16.10(i)
Projecting SignNot listed32 sq ftNot listed2 ft from curb line (if projecting into right-of-way)1 per street frontagePer establishment with street frontage (1 per street); may project into public right-of-way (min 2 ft from curb)Not listedUnlockSec. 80-16.10(h)

C-2 (Temporary Inflatable Signs)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Inflatable Sign25 ftAggregate lettering/advertising 150 sq ft25 ftCannot extend into setbacks1 per location at a timeOn private property in C-2 only (or if city-sponsored event)Not listedUnlockSec. 80-16.9

PermitPal covers all 12 zoning districts in Rome. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Rome

  • All signs not expressly allowed by this code are prohibited.
  • No sign may obstruct any ingress or egress, including fire escapes, or windows.
  • No sign may be attached to a fire escape.
  • No sign may be allowed to become dilapidated or deteriorated.
  • Sign illumination may not be combined with reflective materials, such as mirrors, polished metal, or highly-glazed tiles, which would increase glare.
  • No sign illumination may cast glare or direct light upon roadways and surrounding properties, or distract motor vehicle operators or pedestrians in the public right-of-way.
  • Flashing signs are prohibited.
  • Moving signs, including signs designed to be moved by wind or other natural elements, are prohibited (excluding clocks and barber poles).
  • Parked advertising vehicles and vehicle signs are prohibited unless the primary purpose of the vehicle is transportation and they are operated and stored in the normal course of business in operable condition. Vehicle for-sale signs are exempt.
  • Roof signs are prohibited.
  • Snipe signs are prohibited.
  • Temporary off-premise signs are prohibited.
  • Signs that interfere with, obstruct the view of, or may be confused with any authorized traffic sign, signal, or device, including those illuminated in red, green, or amber resembling a traffic signal, are prohibited.
  • Signs that make use of the words STOP, LOOK, DETOUR, DANGER, CAUTION, WARNING, or any similar message in a manner that misleads, interferes with, or confuses traffic are prohibited.
  • Tri-vision signs are prohibited.
  • Neon or LED lighting to outline doors and windows is prohibited.
  • Flashing neon or LED lighting is prohibited.
  • No sign may be constructed or maintained in violation of state uniform fire prevention and building code.

Exempt Signs in Rome

  • Painting, repainting, cleaning, changing permitted items of information, or other normal maintenance and repair of a sign not involving structural changes or changes in the electrical components are exempt from sign permit requirements (but activity increasing sign area, height, or dimension is not exempt).
  • Changing the message of a changeable message sign or electronic message sign is exempt from sign permit requirements.
  • Logos and labels on mechanical equipment, recycling bins, trash containers, or similar, which are part of the equipment as manufactured and/or installed, are exempt.
  • Signs installed by the sponsors of public transit stations, bike-sharing stations, or car-share facilities are exempt.
  • Signs installed on gas station pumps to advertise products or services available on the premises are exempt, limited to two square feet in area and one per pump station.
  • The following permanent and temporary signs are allowed without a sign permit, provided they are not illuminated (unless specified otherwise) and comply with all regulations: building entryway signs, construction activity signs, flags of nations/governments/organizations, garage or yard sale activity signs, government signs, light pole banners, memorial signs, noncommercial message signs, parking lot signs (circulation and information), real estate activity signs, window signs.
  • Signs painted on vehicles, trucks, or buses being operated and stored in normal course of business are exempt from vehicle sign prohibition, provided primary purpose is not display of signs and vehicles are operable. Vehicle for-sale signs are also exempt.

Sign Plan & Submission Notes for Rome

  • Sign permit applications for A-frame signs must include a placement plan showing the general location of the A-frame sign.
  • Applications for signs in historic districts must be accompanied by a written statement from the chairman of the historic and scenic preservation commission confirming the sign application has been reviewed and approved by the planning board.

Source: municode municipal code