Questions? Call us at (262) 218-2915

Sign Regulations in Rosendale Town, New York

Rosendale Town, New York has specific sign regulations covering 19 sign types across 4 zoning districts. Regulated sign types include Wall Sign (Permitted Nonresidential Use), Freestanding Sign (Permitted Nonresidential Use - Setback Over 50 Ft), Wall Sign (Dwellings for Five or More Families). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Rosendale Town, New York

Sample Sign Requirements in Rosendale Town

Sign TypeMax HeightMax AreaSetback
Wall Sign (Permitted Nonresidential Use)Not listed32 square feet (aggregate)Not listed
Freestanding Sign (Permitted Nonresidential Use - Setback Over 50 Ft)5 feet15 square feet (total face area); 8 square feet/side (two sides max) if facing more than one directionBuilding must be set back more than 50 ft. Sign must be 10 ft from property line or road (greater applies).
Wall Sign (Dwellings for Five or More Families)Not listed12 square feet (aggregate)Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Rosendale TownFull Coverage

Sign Types Covered

19

  • Wall Sign (Permitted Nonresidential Use)
  • Freestanding Sign (Permitted Nonresidential Use - Setback Over 50 Ft)
  • Wall Sign (Dwellings for Five or More Families)
  • Nameplate/Professional Sign (Any Dwelling Unit)
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Rosendale Town

Municipal Code2 permit application links available

Frequently Asked Questions

In Rosendale Town, the height limit for Freestanding Sign (Permitted Nonresidential Use - Setback Over 50 Ft) in the Residential District is 5 feet (Sec. 75-22A(1)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Rosendale Town require a permit. From the submission notes on this page: No explicit requirement for a master sign plan, sign plan, or variance meeting for all signs across all zones is found other than approvals by the Town Planning Board where specified. Run a code check for an exact address to see the permit requirements for that zone.

Rosendale Town's sign code covers 19 sign types, including Wall Sign (Permitted Nonresidential Use), Freestanding Sign (Permitted Nonresidential Use - Setback Over 50 Ft), Wall Sign (Dwellings for Five or More Families), and Nameplate/Professional Sign (Any Dwelling Unit). Most commercial signs need a permit. The ordinance lists 5 exemptions. One of them: One sign denoting the architect, engineer, and/or contractor on work under construction, not exceeding 24 square feet in area. The full list is on this page.

This page doesn't list a single setback distance for signs in Rosendale Town. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Rosendale Town's sign ordinance that cover digital, changing, or flashing signs: Illumination of signs shall not be of intermittent or varying intensity or produce direct glare beyond the limits of the side property line. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Rosendale Town Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Rosendale Town, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Rosendale Town, New York Sign Rules at a Glance

Rosendale Town, New York regulates 19 sign types across 4 zoning districts. Construction Signs are capped at 24 square feet (Sec. 75-22G(3)). Most commercial signs in Rosendale Town require a permit.

Detailed Sign Ordinance Requirements for Rosendale Town, New York

Sign Rules by Zoning District in Rosendale Town (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential District45 feet32 square feet (aggregate)Not listed
Business District220 feet above ground or not exceeding the highest part of building, whichever is less restrictive100 square feet (whichever is less)Not listed
B-1 Business District, B-2 Business District, Light Industrial District120 feet above ground or 5 feet above roof at sign location (whichever is less)100 square feet (aggregate per establishment for both signs)Not listed
General Regulations For All Zones12Not listed50 square feet (aggregate)Not listed

Zone-by-Zone Sign Requirements in Rosendale Town(sample of 3 of 4 zones)

Residential District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Permitted Nonresidential Use)Not listed32 square feet (aggregate)Not listedNot listedNot listedAttached to principal building of permitted nonresidential use.Not listedUnlock§ 75-22A(1)
Freestanding Sign (Permitted Nonresidential Use - Setback Over 50 Ft)5 feet15 square feet (total face area); 8 square feet/side (two sides max) if facing more than one directionNot listedBuilding must be set back more than 50 ft. Sign must be 10 ft from property line or road (greater applies).One additional (in addition to allowed wall sign).Erected in ground, no nearer than 10 ft to any property line or roadNot listedUnlock§ 75-22A(1)
Wall Sign (Dwellings for Five or More Families)Not listed12 square feet (aggregate)Not listedNot listedNot listedAttached to principal building on the lot.Not listedUnlock§ 75-22A(2)
Nameplate/Professional Sign (Any Dwelling Unit)Not listed2 square feetNot listedNot listed1 per dwelling unitOn dwelling unit (detached or attached structure)Not listedUnlock§ 75-22A(3)

Business District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign20 feet above ground or not exceeding the highest part of building, whichever is less restrictive100 square feet (whichever is less)Not listedNot listed2 per business establishment (plus 1 on secondary street if applicable)On principal building; facing principal frontage.Not listedUnlock§ 75-22B
Projecting Sign (Main Street, Hamlet of Rosendale)Not listed12 square feet per faceNot listedSee above regarding distance from curb and access drives.1 per establishment per frontageEach public right-of-way frontage (Main Street in the hamlet of Rosendale only).Not listedUnlock§ 75-22E(1)-(5)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Directional Sign (Off-site Directional)Not listed4 square feet per establishmentNot listedNot listedNot listedAny district; must be grouped on community poles.Not listedUnlock§ 75-22D
Subdivision SignNot listed50 square feet (aggregate)Not listedNot listedNot listedWithin subdivision or adjoining property in same ownership.Not listedUnlock§ 75-22F
Mobile SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§ 75-22L
Real Estate Sign (Residential/Business District)Not listed6 square feet (aggregate)Not listedNot listedNot listedOn premises being sold/rented/leased.Not listedUnlock§ 75-22G(1)
Real Estate Sign (Light Industrial District)Not listed32 square feet (aggregate)Not listedNot listedNot listedOn premises being sold/rented/leased.Not listedUnlock§ 75-22G(1)
Professional/Business Nameplate (Any Zone)Not listed1 square footNot listedNot listed1 per professional/business establishmentNot listedNot listedUnlock§ 75-22G(2)
Construction SignNot listed24 square feetNot listedNot listed1 per construction siteOn property under constructionNot listedUnlock§ 75-22G(3)
Memorial/Building Name SignNot listedNot listedNot listedNot listedNot listedMasonry surface or constructed of bronze, stainless steel or similar.Not listedUnlock§ 75-22G(4)

PermitPal covers all 4 zoning districts in Rosendale Town. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Rosendale Town

  • No sign or other device for advertising purposes of any kind may be erected or established in the Town except as provided in the ordinance.
  • Signs not pertaining to the use, sale, rent or lease of property on the same lot and signs not representing construction or subdivision activity as allowed are not permitted in any district, except directional signs as specified.
  • Signs projecting more than two feet from the face of a building to which they are attached are prohibited except on Main Street in the hamlet of Rosendale in the business district, and only as permitted.
  • Red, green and amber lights of such shape and hue that they may be confused with official traffic lights and signals are prohibited.
  • Illumination of signs shall not be of intermittent or varying intensity or produce direct glare beyond the limits of the side property line.
  • All bare incandescent light sources and immediately adjacent reflecting surfaces shall be shielded from view.
  • Banners and similar devices are prohibited, except nonpermanent ones for special events and only for up to three weeks.
  • Any sign that no longer advertises a business or product available on the premises must be removed by the owner within 10 days after notification from the Building Inspector.
  • The Building Inspector is authorized to remove such non-compliant signs and bill expenses to the building owner.
  • Mobile signs are only permitted with a temporary permit and may not cause a traffic safety hazard or have other adverse public welfare effects.
  • A mobile sign located on a property for 15 consecutive days or 30 days in a calendar year must comply with all district sign regulations for permanent signs.
  • Nonconforming signs (those that exceed area/quantitative limits by more than 25% or violate illumination rules) cannot be physically altered or enlarged, and if removed for reasons other than maintenance, cannot be replaced except with conforming signs.

Exempt Signs in Rosendale Town

  • Real estate signs advertising the sale, rental, or lease of premises upon which the sign is located and having an aggregate total face no greater than 6 square feet in residential and business districts, or 32 square feet in Light Industrial Districts.
  • One professional or business nameplate not exceeding one square foot in area for one professional or business establishment where such signs are not otherwise permitted.
  • One sign denoting the architect, engineer, and/or contractor on work under construction, not exceeding 24 square feet in area.
  • Memorial signs or tablets, names of buildings, and dates of erection when cut into any masonry surface or constructed of bronze, stainless steel, or similar material.
  • Traffic or other municipal signs, legal notices, and such temporary, emergency, or nonadvertising signs as may be authorized by the Town Board.

Sign Plan & Submission Notes for Rosendale Town

  • Directional signs for the purpose of directing persons to a business or establishment must be approved by the Town Planning Board.
  • No explicit requirement for a master sign plan, sign plan, or variance meeting for all signs across all zones is found other than approvals by the Town Planning Board where specified.

Source: ecode360 municipal code