Sign Regulations in Clinton, Ohio
Clinton, Ohio has specific sign regulations covering 17 sign types across 4 zoning districts. Regulated sign types include Wall Sign (Projecting), Window Sign, Permanent Ground-Mounted Sign (Driveway/Directional). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 7, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Clinton, Ohio
Sample Sign Requirements in Clinton
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Ground-Mounted Monument Sign (Residential Development Entrance) | 4 ft | 20 sq ft | 10 ft from public right-of-way; 20 ft from adjacent side lot lines |
| Wall Sign (Residential Development Entrance) | 4 ft | 20 sq ft (not including the wall or fence area) | 10 ft from public right-of-way; 20 ft from adjacent side lot lines |
| Ground-Mounted Sign (Public or Institutional Use) | 4 ft | 20 sq ft (10 sq ft may be manual changeable copy) | 10 ft from public right-of-way; 20 ft from adjacent side lot lines |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
17
- Wall Sign (Projecting)
- Window Sign
- Permanent Ground-Mounted Sign (Driveway/Directional)
- Flag (Commercial Speech)
- +2 more types
Zoning Districts
4
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Clinton
Other Cities in Ohio
Frequently Asked Questions
In Clinton, the height limit for Pole-Mounted Sign in the Warwick Business District (B-2), Industrial District (I-1) is 25 ft (Sec. 1157.09(a)). The height limit for Wall Sign (Projecting) in the Warwick Business District (B-2), Industrial District (I-1) is 12 ft and not exceeding building height (Sec. 1157.09(b)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Clinton require a permit. From the submission notes on this page: All signs (except temporary signs permitted under Section 1157.10) to be erected, placed, established, moved, altered, or remodeled must be submitted to the Planning Commission for review and recommendation to the Zoning Inspector as part of the sign permit review process. Run a code check for an exact address to see the permit requirements for that zone.
Clinton's sign code covers 17 sign types, including Wall Sign (Projecting), Window Sign, Permanent Ground-Mounted Sign (Driveway/Directional), and Flag (Commercial Speech). Most commercial signs need a permit. The ordinance lists 10 exemptions. One of them: General maintenance of a sign or changing the copy of a changeable copy sign does not require a sign permit. The full list is on this page.
In Clinton, Pole-Mounted Sign in the Warwick Business District (B-2), Industrial District (I-1) must be set back 10 ft from public right-of-way (Sec. 1157.09(a)). The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Clinton's sign ordinance that cover digital, changing, or flashing signs: All illuminated signs must use lights emitting a constant intensity; flashing, revolving, or intermittent illumination is prohibited except for electronic message centers where otherwise specified. Manual or electronic message changes on an electronic message center or reader board (changeable copy sign) are exempt from permit requirements, provided no structure or panel changes are made. Electronic message centers and certain permanent signs in residential and business districts may require conditional use review as established in Section 1113.06, Conditional Use. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Clinton Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Clinton, Ohio, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Clinton, Ohio Sign Rules at a Glance
Clinton, Ohio regulates 17 sign types across 4 zoning districts. Temporary Commercial Signs (Development Construction) are capped at 4 ft tall and 20 sq ft, set back 25 ft from all street rights-of-way (Sec. 1157.10(c)(2)). Most commercial signs in Clinton require a permit.
Detailed Sign Ordinance Requirements for Clinton, Ohio
Sign Rules by Zoning District in Clinton (4 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential Zoning Districts | 3 | 4 ft | 20 sq ft | Not listed |
| Warwick Business District (B-2), Industrial District (I-1) | 7 | Flagpole: 35 ft | 50 sq ft | Not listed |
| Downtown Canal District (B-1) | 4 | Flagpole: 35 ft | 50 sq ft | Not listed |
| General Regulations For All Zones | 7 | 4 ft | 20 sq ft | Not listed |
Zone-by-Zone Sign Requirements in Clinton(sample of 3 of 4 zones)
Warwick Business District (B-2), Industrial District (I-1)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Pole-Mounted Sign | 25 ft | 20 sq ft | Not listed | 10 ft from public right-of-way; 20 ft from adjacent lot lines | One per parcel/lot per street frontage | Each parcel/lot; additional sign permitted on each additional street frontage | Not listed | Unlock | Sec. 1157.09(a) |
| Wall Sign (Projecting) | 12 ft and not exceeding building height | 50 sq ft | Not listed | Not listed | One per building/facade facing a public street | Per building face facing public street | Not listed | Unlock | Sec. 1157.09(b) |
| Window Sign | Not listed | Not to cover more than 20% of each window surface | Not listed | Not listed | No specified limit; covered by area restriction | Within windows of business in district | Not listed | Unlock | Sec. 1157.09(c) |
| Permanent Ground-Mounted Sign (Driveway/Directional) | 3 ft | 4 sq ft (max 2 sq ft with commercial message) | Not listed | 5 ft from all lot lines; not more than 25 ft from driveway entrance/internal intersection | One per individual driveway or internal intersection | Near driveway entrances to street and at intersections of internal drives | Not listed | Unlock | Sec. 1157.09(d) |
| Flag (Commercial Speech) | Flagpole: 35 ft | 40 sq ft | Not listed | Not listed | One per parcel | Installed on a permanent flagpole on property | Not listed | Unlock | Sec. 1157.09(e) |
| Permanent Sign Related to Gasoline Sales | Not listed | Double-faced sign; not specified but most likely integrated into pole-mounted sign area | Not listed | Not listed | One per fueling station | Per fueling station where gasoline/fuel is dispensed | Not listed | Unlock | Sec. 1157.09(f) |
| Electronic Message Center | Not listed | 20 sq ft or 50% of total sign area, whichever is less | Not listed | Not listed | One per lot | On premises of Warwick Business District (B-2) and Industrial District (I-1) | Not listed | Unlock | Sec. 1157.09(g) |
Downtown Canal District (B-1)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign (Projecting) | 12 ft, not to exceed building height | 50 sq ft | Not listed | Not listed | One per building/facade facing a public street | Per building facade facing public street | Not listed | Unlock | Sec. 1157.09(b), Sec. 1157.05(j)(3)a |
| Window Sign | Not listed | Not to cover more than 20% of each window surface | Not listed | Not listed | No specified limit; covered by area restriction | Within windows of business in district | Not listed | Unlock | Sec. 1157.09(c) |
| Permanent Ground-Mounted Sign (Driveway/Directional) | 3 ft | 4 sq ft (max 2 sq ft with commercial message) | Not listed | 5 ft from all lot lines; not more than 25 ft from driveway entrance/internal intersection | One per individual driveway or internal intersection | Near driveway entrances to street and at intersections of internal drives | Not listed | Unlock | Sec. 1157.09(d) |
| Flag (Commercial Speech) | Flagpole: 35 ft | 40 sq ft | Not listed | Not listed | One per parcel | Installed on a permanent flagpole on property | Not listed | Unlock | Sec. 1157.09(e) |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Temporary Commercial Sign (For Sale/Lease/Auction) | 4 ft | 6 sq ft | Not listed | 10 ft from edge of street pavement or right-of-way, whichever is greater | One per lot or structure (+ one per additional street frontage) | On lot/structure for sale/lease/auction; one additional sign on extra street frontage | Not listed | Unlock | Sec. 1157.10(c)(1) |
| Temporary Commercial Sign (Development Construction) | 4 ft | 20 sq ft | Not listed | 25 ft from all street rights-of-way | One per development/subdivision | On property to be developed | Not listed | Unlock | Sec. 1157.10(c)(2) |
| Temporary Commercial Sign (Special Event, A-Frame Allowed) | 4 ft | 16 sq ft | Not listed | 25 ft from all street rights-of-way | One per event | On lot of the event | Not listed | Unlock | Sec. 1157.10(c)(3) |
| Temporary Sign (Public/Institutional) | 4 ft | 16 sq ft per side | Not listed | Not listed | One at a time | On property of public/institutional use | Not listed | Unlock | Sec. 1157.10(c)(4) |
| Temporary Political Sign | Not listed | 12 sq ft per side | Not listed | Not listed | No explicit limit | Any district | Not listed | Unlock | Sec. 1157.10(d) |
| Commemorative or Memorial Plaque | Not listed | 16 sq ft | Not listed | Not listed | No explicit limit | Placed by Village, County, State, or recognized historical agencies | Not listed | Unlock | Sec. 1157.07(a)(1) |
| Wall Sign (Dwelling Unit Identification) | Not listed | 1 sq ft | Not listed | Not listed | One per dwelling unit | On each dwelling unit | Not listed | Unlock | Sec. 1157.07(a)(2) |
PermitPal covers all 4 zoning districts in Clinton. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Clinton
- No sign shall be erected or maintained at any location where it may obstruct, impair, obscure, interfere with the view of, or be confused with any authorized traffic sign, signal or device, or interfere with traffic safety or flow.
- No portion of a sign shall obscure visibility within the visibility triangle established for intersections.
- Signs shall not be attached to trees, utility poles, rocks, fences, or streetlights, nor placed on any public property except as permitted by the ordinance.
- No person may damage, trim, destroy, or remove vegetation within any right-of-way or required landscaping area for the purpose of increasing sign visibility, unless expressly authorized.
- No sign shall be constructed on or over any road right-of-way.
- No sign of any classification shall be installed, erected, or attached in violation of any applicable building and fire codes.
- The light from illuminated signs shall not adversely affect residential districts or the safe vision and operation of vehicles, nor shall it shine or reflect on or into residential structures.
- All illuminated signs must use lights emitting a constant intensity; flashing, revolving, or intermittent illumination is prohibited except for electronic message centers where otherwise specified.
- Signs must employ lighting so that the source is not visible from the road and shall not shine on adjoining properties.
- No sign shall rotate, revolve, or otherwise move unless expressly permitted under the ordinance.
- No sign shall be mounted, attached, affixed, installed, or otherwise secured so as to protrude above the roof of a structure.
- No temporary sign shall be mounted, attached, or secured by any permanent means to any building, permanent sign, other structure or improvement, or the ground.
- No temporary sign shall be illuminated by anything other than non-reflected daylight.
- Off-premises signs are prohibited.
- Signs may not be placed on vehicles or trailers parked or located for the primary purpose of displaying such signs.
- Portable signs and snipe signs are prohibited.
- Signs imitating or resembling official traffic or governmental signs or signals are prohibited.
- Signs emitting any noisy mechanical device are prohibited.
- Signs above the roofline are prohibited.
- Signs with commercial messages are prohibited in residential zoning districts unless relating to lawful commercial activities conducted on those properties.
Exempt Signs in Clinton
- Signs located entirely within buildings or otherwise not visible from the public right-of-way or other properties are exempt from this chapter.
- General maintenance of a sign or changing the copy of a changeable copy sign does not require a sign permit.
- Commemorative or memorial plaques placed by government or recognized historical agencies, bearing no commercial message, not directly illuminated, and not exceeding 16 square feet, are exempt from sign permit and fee requirements.
- One wall sign (not exceeding one square foot, non-commercial, non-illuminated) per dwelling unit is exempt from sign permit and fee requirements.
- Routine maintenance of any sign, not involving structural changes, is permit-exempt.
- Manual or electronic message changes on an electronic message center or reader board (changeable copy sign) are exempt from permit requirements, provided no structure or panel changes are made.
- Signs installed by government entities in the course of official duties are permit-exempt.
- Signs conforming to the Manual of Uniform Traffic Control Devices and bearing no commercial message are permit-exempt.
- Detached signs smaller than two square feet in area and less than four feet in height, with no commercial message, are exempt from permit requirements and do not count towards sign limits.
- Wall signs smaller than two square feet in area and containing no commercial message are exempt from permit requirements and do not count towards sign limits.
Sign Plan & Submission Notes for Clinton
- Unless otherwise specified, all signs and structural changes to existing signs require a sign permit and payment of fees.
- A sign permit is required for changing a sign panel even if there is no structural change, or for changing copy when a sign is painted or otherwise printed on a structure (unless it is a changeable copy sign).
- All signs (except temporary signs permitted under Section 1157.10) to be erected, placed, established, moved, altered, or remodeled must be submitted to the Planning Commission for review and recommendation to the Zoning Inspector as part of the sign permit review process.
- Minor repairs not involving a panel or structural change are not subject to Planning Commission review.
- Signs on awnings, canopies, or marquees must meet all applicable building and electrical codes.
- Electronic message centers and certain permanent signs in residential and business districts may require conditional use review as established in Section 1113.06, Conditional Use.
Source: municode municipal code