Sign Regulations in Clyde, Ohio
Clyde, Ohio has specific sign regulations covering 22 sign types across 9 zoning districts. Regulated sign types include Plaque/Nameplate Sign, Directional/Information Sign, Official/Government Sign. Height restrictions apply. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 7, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Clyde, Ohio
Sample Sign Requirements in Clyde
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Plaque/Nameplate Sign | Not listed | 2 sq ft per sign face | Not listed |
| Directional/Information Sign | Not listed | 4 sq ft per sign face | Not listed |
| Temporary Sign | Not listed | 8 sq ft per sign face | 10 ft from right-of-way |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
22
- Plaque/Nameplate Sign
- Directional/Information Sign
- Official/Government Sign
- Temporary Sign
- +2 more types
Zoning Districts
9
Different zoning districts with specific sign regulations
Data Includes
- Height restrictions
- Illumination rules
Official Resources for Clyde
Other Cities in Ohio
Frequently Asked Questions
In Clyde, the height limit for Freestanding Sign in the I-1 General Industrial District (I-1) is 35 ft (Sec. 1157.09(b)(1)A.1). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
From the submission notes on this page: Variance requests for signs may be granted by the board of zoning appeals if strict compliance would impose undue hardship; the procedure for application and hearings is the same as zoning variances (1157.05(b)). Run a code check for an exact address to see the permit requirements for that zone.
Clyde's sign code covers 22 sign types, including Plaque/Nameplate Sign, Directional/Information Sign, Official/Government Sign, and Temporary Sign. The ordinance lists 9 exemptions. One of them: The following signs may be displayed in all zoning districts without a permit, subject to all other provisions of this chapter: (1157.06). The full list is on this page.
In Clyde, Freestanding Sign in the I-1 General Industrial District (I-1) must be set back 10 ft from right-of-way (Sec. 1157.09(b)(1)A.1). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Clyde's sign ordinance that cover digital, changing, or flashing signs: Signs that contain, include, or are illuminated by a flashing, intermittent, or moving light or lights are prohibited (1157.14(k)(1)). Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Clyde Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Clyde, Ohio, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Clyde, Ohio Sign Rules at a Glance
Clyde, Ohio regulates 22 sign types across 9 zoning districts. Freestanding Signs in the I-1 General Industrial District (I-1) are capped at 35 ft tall, set back 10 ft from right-of-way (Sec. 1157.09(b)(1)A.1).
Detailed Sign Ordinance Requirements for Clyde, Ohio
Sign Rules by Zoning District in Clyde (9 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| O-S Open Space District | 4 | Not listed | 8 sq ft per sign face | Not listed |
| R-1 Single Family Residential District (R-1), R-1A Single Family Residential District (R-1A), R-2 Mixed Residential District (R-2), R-3 Residential District (R-3), R-O Residential/Office District (R-O) | 8 | 6 ft | 32 sq ft per sign face/per sign; max 64 sq ft total (if 2 signs) | Not listed |
| PUD Planned Unit Development District (PUD) | 1 | Not listed | Not listed | Not listed |
| C-1 Central Business District (C-1), C-2 General Commercial District (C-2) | 10 | 20 ft (C-1, C-2); up to 35 ft (66 sq ft sign area) for C-1 with zero lot line exemption | 125 sq ft per premise | Not listed |
| I-1 General Industrial District (I-1) | 8 | 35 ft | 48 sq ft per sign face; 64 sq ft total area | Not listed |
| Highway Overlay District | 1 | 50 ft | 200 sq ft per face; 400 sq ft total area per sign | Not listed |
| Large Planned Commercial Development | 1 | Not listed | Not listed | Not listed |
| Route 20 Corridor | 1 | 20 ft above roadway grade | 72 sq ft per face | Not listed |
| General Regulations For All Zones | 1 | Not listed | Not listed | Not listed |
Zone-by-Zone Sign Requirements in Clyde(sample of 3 of 9 zones)
R-1 Single Family Residential District (R-1), R-1A Single Family Residential District (R-1A), R-2 Mixed Residential District (R-2), R-3 Residential District (R-3), R-O Residential/Office District (R-O)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Plaque/Nameplate Sign | Not listed | 2 sq ft per sign face | Not listed | Not listed | 1 | On premises | Not listed | Unlock | Sec. 1157.06(a) |
| Directional/Information Sign | Not listed | 4 sq ft per sign face | Not listed | Not listed | Not listed | On premises | Not listed | Unlock | Sec. 1157.06(b) |
| Official/Government Sign | Not listed | Not listed | Not listed | Not listed | Not listed | On premises/public property | Not listed | Unlock | Sec. 1157.06(c) |
| Temporary Sign | Not listed | 8 sq ft per sign face | Not listed | 10 ft from right-of-way | Not listed | On same lot as accessory use, at least 10 feet from right-of-way | Not listed | Unlock | Sec. 1157.06(e) |
| Subdivision Identification Sign | 4 ft (ground-mounted sign) | 32 sq ft per sign face/per sign; max 64 sq ft total (if 2 signs) | Not listed | 10 ft from right-of-way | 2 | At dedicated street entrance, on private property, at least 10 ft from right-of-way | Not listed | Unlock | Sec. 1157.07(b)(1) |
| Institutional Sign | 4 ft (ground-mounted sign) | 32 sq ft per sign face/per sign; max 64 sq ft total (if 2 signs) | Not listed | 10 ft from right-of-way | 2 | On the same lot as accessory use, at least 10 ft from right-of-way | Not listed | Unlock | Sec. 1157.07(b)(2) |
| Multi-Family Dwelling or Boarding House Sign | 6 ft | 32 sq ft per sign face, max 64 sq ft total | Not listed | 10 ft from right-of-way | 1 | At dedicated street entrance, at least 10 ft from right-of-way | Not listed | Unlock | Sec. 1157.07(b)(3) |
| Home Based Business Sign | Not listed | 6 sq ft | Not listed | 10 ft from right-of-way | 1 | At dedicated street entrance, at least 10 ft from right-of-way | Not listed | Unlock | Sec. 1157.07(b)(4) |
C-1 Central Business District (C-1), C-2 General Commercial District (C-2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Plaque/Nameplate Sign | Not listed | 2 sq ft per sign face | Not listed | Not listed | 1 | On premises | Not listed | Unlock | Sec. 1157.06(a) |
| Directional/Information Sign | Not listed | 4 sq ft per sign face | Not listed | Not listed | Not listed | On premises | Not listed | Unlock | Sec. 1157.06(b) |
| Temporary Sign | Not listed | 32 sq ft per sign face | Not listed | 10 ft from right-of-way | Not listed | On lot of accessory use, at least 10 ft from right-of-way | Not listed | Unlock | Sec. 1157.06(e) |
| Freestanding Sign | 20 ft (C-1, C-2); up to 35 ft (66 sq ft sign area) for C-1 with zero lot line exemption | 25 sq ft (max) | Not listed | Not listed | 1 | One per premises; cannot extend over sidewalk or street; 3 ft from curb; 8 ft minimum vertical clearance if projecting | Not listed | Unlock | Sec. 1157.08(b)(1), (b)(2), (c)(1) |
| Wall Sign | Not listed | 125 sq ft per premise | Not listed | Not listed | 2, plus additional per regulations | On wall, per tenant space | Not listed | Unlock | Sec. 1157.08(b)(3), (c)(2)-(3) |
| Under Canopy Sign | Not listed | 4 sq ft | Not listed | Not listed | 1 per tenant | Per tenant space | Not listed | Unlock | Sec. 1157.08(b)(4) |
| Projecting Sign | Not listed | 3 sq ft per sign face | Not listed | Not listed | 1 per tenant | Per tenant space | Not listed | Unlock | Sec. 1157.08(b)(5), (c)(1) |
| Incidental Sign | Not listed | 2 sq ft per sign face per tenant space | Not listed | Not listed | Not listed | Per tenant space | Not listed | Unlock | Sec. 1157.08(a)(2) |
I-1 General Industrial District (I-1)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Plaque/Nameplate Sign | Not listed | 2 sq ft per sign face | Not listed | Not listed | 1 | On premises | Not listed | Unlock | Sec. 1157.06(a) |
| Directional/Information Sign | Not listed | 4 sq ft per sign face | Not listed | Not listed | Not listed | On premises | Not listed | Unlock | Sec. 1157.06(b) |
| Official/Government Sign | Not listed | Not listed | Not listed | Not listed | Not listed | On premises/public property | Not listed | Unlock | Sec. 1157.06(c) |
| Temporary Sign | Not listed | 32 sq ft per sign face | Not listed | 10 ft from right-of-way | Not listed | At least 10 ft from right-of-way | Not listed | Unlock | Sec. 1157.06(e) |
| Festoons | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Sec. 1157.09(a)(2) |
| Freestanding Sign | 35 ft | 40 sq ft per sign face, 80 sq ft total area | Not listed | 10 ft from right-of-way | 1 | At least 10 ft from right-of-way | Not listed | Unlock | Sec. 1157.09(b)(1)A.1 |
| Ground Mounted Sign | 6 ft | 48 sq ft per sign face; 64 sq ft total area | Not listed | 10 ft from right-of-way | 1 | At least 10 ft from right-of-way | Not listed | Unlock | Sec. 1157.09(b)(1)A.2 |
| Wall Sign/Projecting/Awning/Under-Canopy Sign (industrial combination) | Not above wall to which fastened | Not listed | Not listed | Not listed | Up to 3 (any combination) | On building | Not listed | Unlock | Sec. 1157.09(b)(1)B.1-2 |
PermitPal covers all 9 zoning districts in Clyde. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Clyde
- No sign shall be erected unless it is in compliance with the regulations of this chapter (1157.03(a)).
- Signs must be constructed in compliance with any applicable regulations of the city's zoning code and any applicable state building and fire codes (1157.03(b)).
- All signs shall be properly maintained; defective, damaged or substantially deteriorated signs must be repaired or removed by the property owner, agent, or beneficiary (1157.03(c)).
- Any sign, retractable canopy, or awning that advertises a business no longer conducted on the premises constitutes a public nuisance and must be removed immediately after written notice from the zoning inspector (1157.03(d)).
- No sign shall obstruct or interfere with traffic or traffic visibility, or resemble or imitate signs or signals erected by government agencies (1157.03(e)).
- No illuminated sign shall contain any part that flashes on or off or displays changing degrees of intensity, except holiday, religious, or automatic changeable copy signs (1157.03(f)).
- No sign may project or be mounted over any public street, sidewalk, or on any public right-of-way, except as expressly permitted (1157.03(g)).
- Any permanently mounted sign must bear, in a permanent position, a clearly legible identification stating the name and address of the owner, the responsible party for construction, and the date of erection (1157.03(h)).
- No sign, except governmental signs, shall be placed, displayed, or erected in the public right-of-way or on public property without written approval from the city manager (1157.03(i)).
- No snipe signs shall be placed, erected, or displayed within the city (1157.03(j)).
- No light source for illuminated signs shall be of such brightness or orientation as to constitute a hazard to pedestrian or vehicular traffic (1157.03(k)).
- No sign shall be erected or placed on any property without the consent of the owner (1157.03(o)).
- No sign shall be placed where it blocks or impedes sight lines for any person, pedestrian or operator of a vehicle on a public right-of-way, driveway, or sidewalk (1157.03(p)).
- No sign shall imitate or resemble official traffic or governmental signs or signals (1157.03(q)).
- No sign shall be erected so as to have less than eight feet of vertical clearance between such sign and the public sidewalk (1157.03(r)).
- No temporary sign shall be illuminated (1157.06(e)(2)).
- No off-premise sign shall be constructed which resembles any official marker erected by a governmental entity, or which by reason of position, shape or color would conflict with the proper functioning of any official traffic control device (1157.14(a)).
- No off-premise sign shall be located on a property without the consent of the property's owner or legal representative (1157.14(d)).
- No off-premise sign shall be erected within 500 feet of another off-premise sign or within 500 feet of a residential district (1157.14(i)(1), (i)(3)).
- No off-premise sign shall be constructed that faces residential districts (1157.14(f)).
- Signs that contain, include, or are illuminated by a flashing, intermittent, or moving light or lights are prohibited (1157.14(k)(1)).
- No sign shall be so illuminated that it interferes with the effectiveness of, or obscures, an official traffic sign, device, or signal (1157.14(k)(4)).
- Contractors erecting, altering, relocating, constructing, or maintaining signs must have a valid city local zoning certificate and state and federal licenses (1157.14(l)).
- No person shall locate, erect, construct, reconstruct, enlarge, change, maintain, or use any sign in violation of any regulation adopted by the council (1157.99).
Exempt Signs in Clyde
- The following signs may be displayed in all zoning districts without a permit, subject to all other provisions of this chapter: (1157.06)
- One plaque, nameplate or tablet denoting the name of the building and/or date of erection, total area not exceeding two square feet per sign face (1157.06(a)).
- Directional or informational signs not exceeding four square feet per sign face (1157.06(b)).
- Official federal, state, or local government signs, flags, emblems, and historical markers (1157.06(c)).
- Holiday or special event decorations subject to applicable provisions (1157.06(d)).
- Temporary signs, unless otherwise provided, subject to specific conditions, including display duration and size (1157.06(e)).
- Public notices or information signs identifying telephones, rest rooms, and similar facilities, not exceeding two square feet per face (1157.06(f)).
- Incidental signs (1157.06(g)).
- Any sign relating to an emergency which poses an imminent threat to human life or property (1157.06(h)).
Sign Plan & Submission Notes for Clyde
- Variance requests for signs may be granted by the board of zoning appeals if strict compliance would impose undue hardship; the procedure for application and hearings is the same as zoning variances (1157.05(b)).
- In the 'Large Planned Commercial Development' section, all other signs (not specifically permitted) are allowed only by special variance granted by the planning commission after full consideration of the proponent's special variance request, which shall set forth all proposed signs affecting the public right-of-way in full detail and in coordination with the physical and architectural design of the proposed development (1157.11(b) and (c)).
- Planning commission approval (PUD site development plan or multi-family residential development approval process) may require site or architectural plans showing location, type, and design of signage as part of the overall approval package (see 1161.04(b), 1165.02(c)-(d), though these mention site plans generally rather than a separate master sign plan).
Source: municode municipal code