Sign Regulations in Dublin, Ohio

Dublin, Ohio has specific sign regulations covering 38 sign types across 10 zoning districts. Regulated sign types include Wall Sign, Awning Sign, Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: September 9, 2025

Sign Regulation Overview for Dublin, Ohio

Sample Sign Requirements in Dublin

Sign TypeMax HeightMax AreaSetback
Wall Sign (School/Church)8 ft20 sq ft
Ground Sign (School/Church)6 ft15 sq ft8 ft min
Wall Sign (Day Care - Conditional Use)8 ft8 sq ft

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for DublinFull Coverage

Sign Types Covered

38

  • Wall Sign
  • Awning Sign
  • Projecting Sign
  • Window Sign
  • +2 more types

Zoning Districts

10

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Dublin

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Dublin, wall signs can be up to 8 ft. Height limits vary by zoning district and sign type. Use PermitPal to get exact requirements for your specific location.

To get a sign permit in Dublin, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Dublin, regulated sign types include Wall Sign, Awning Sign, Projecting Sign, Window Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Dublin vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Dublin are regulated with specific requirements for brightness, animation, and message duration. Dublin has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Dublin Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Dublin, Ohio sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Dublin, Ohio Sign Rules at a Glance

Dublin, Ohio regulates 38 sign types across 10 zoning districts. Ground Sign (Office, Administrative, Professional)s in the Commercial Districts (SO, NC, CC, CB, CCC) zoning district are capped at 15 ft tall and 50 sq ft, with a 8 ft min setback (Sec. § 153.161; § 153.162 Table). Most commercial signs in Dublin require a permit.

Detailed Sign Ordinance Requirements for Dublin, Ohio

Sign Rules by Zoning District in Dublin (10 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential Districts (R, R-1, R-2, R-3, R-4, R-10, R-12)715 ft32 sq ft
Commercial Districts (SO, NC, CC, CB, CCC)1215 ft80 sq ft
Industrial Districts (RI, LI, GI, OLR)315 ft80 sq ft
Innovation Districts (ID-1, ID-2, ID-3, ID-4, ID-5, TF)215 ft80 sq ft
Planned Districts (PLR, PHR, PSC, PHS, PIP, PUD, POLR)1See underlying permitted use per table § 153.162See underlying permitted use per table § 153.162
Special Districts (FP, EQ, OG, EU)1Refer to use category in § 153.162 TableRefer to use category as listed in § 153.162 Table
Bridge Street Corridor Districts (BSC-R, BSC-OR, BSC-O, BSC-C, BSC-HC, BSC-HR, BSC-SCN, BSC-HTN, BSC-IRN, BSC-VMU, BSC-P), BSD-R Residential, BSD-OR Office Residential, BSD-O Office, BSD-C Commercial, BSD-SCN Sawmill Center Neighborhood, BSD-HTN Historic Transition Neighborhood, BSD-IRN Indian Run Neighborhood, BSD-SRN Scioto River Neighborhood, BSD-VMU Vertical Mixed Use, BSD Public, BSD Historic Core, BSD Historic Residential815 ft max; not above roof line100 sq ft
General Regulations For All Zones315 ft if on building32 sq ft
BSD Historic Core715 ft (not above roofline)8 sq. ft.
BSD Historic Residential2As per general codeAs per general code (e.g., 20 sq ft for institutional, less for others)

Zone-by-Zone Sign Requirements in Dublin(sample of 3 of 10 zones)

Commercial Districts (SO, NC, CC, CB, CCC)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign (Office, Administrative, Professional)15 ft50 sq ft1 per building/use; see § 153.157(A)(4) for multiple frontagesOn building wallUnlock§ 153.161; § 153.162 Table
Ground Sign (Office, Administrative, Professional)15 ft50 sq ft8 ft min1 per lot; 2 per corner lot with required separationOn propertyUnlock§ 153.161; § 153.162 Table
Wall Sign (General Commerce: Retail, Restaurant, Lodging, Consumer Service, Personal Service, Entertainment, Wholesaling, Bank, Hospital, Manufacturing, Research)15 ft80 sq ft1 per building/use; see § 153.157(A)(4)On building wallUnlock§ 153.161; § 153.162 Table
Ground Sign (General Commerce: Retail, Restaurant, Lodging, Consumer Service, Personal Service, Entertainment, Wholesaling, Bank, Hospital, Manufacturing, Research)15 ft50 sq ft8 ft min1 per lot; see corner lot rulesOn propertyUnlock§ 153.161; § 153.162 Table
Ground Sign (School, Church, Library)6 ft15 sq ft8 ft min1 per useOn propertyUnlock§ 153.161; § 153.162 Table
Ground Sign (Joint Identification)15 ft80 sq ft8 ft minUp to 2 if site has two street frontages and 1,000 ft of total lot frontageShopping centers/multi-tenant complexesUnlock§ 153.159(B); § 153.162 Table
Ground Sign (Development)8 ft32 sq ft8 ft min1 per useOn propertyUnlock§ 153.161; § 153.162 Table
Ground Sign (Day Care/Nursing Homes)6 ft15 sq ft8 ft min1 per useOn propertyUnlock§ 153.161; § 153.162 Table

Bridge Street Corridor Districts (BSC-R, BSC-OR, BSC-O, BSC-C, BSC-HC, BSC-HR, BSC-SCN, BSC-HTN, BSC-IRN, BSC-VMU, BSC-P), BSD-R Residential, BSD-OR Office Residential, BSD-O Office, BSD-C Commercial, BSD-SCN Sawmill Center Neighborhood, BSD-HTN Historic Transition Neighborhood, BSD-IRN Indian Run Neighborhood, BSD-SRN Scioto River Neighborhood, BSD-VMU Vertical Mixed Use, BSD Public, BSD Historic Core, BSD Historic Residential

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign15 ft max; not above roof line50 sq ft (all BSD zones but Historic Transition); 8 sq ft (BSD Historic Transition)Single tenant: 1 per street frontage; Multi-tenant w/ storefronts: 2 per tenant + possible additional for secondary entranceOn wall facing street (public); within first story; for Historic Core/Transition per elevations allowedUnlock§ 153.065(H)(7)(b), Table 153.065-I; § 153.065(H)(6)(b)-(d)
Awning Sign15 ft max8 sq ft (BSD Historic Transition); 50 sq ft (all others)See aboveOn awningUnlock§ 153.065(H)(7)(b); Table 153.065-I
Projecting Sign15 ft max and not above second story sill or roofline8 sq ft (BSD Historic Transition); 16 sq ft (all others)See per allowance in § 153.065(H)(6)Within 6 ft of tenant or public entranceUnlock§ 153.065(H)(7)(b); Table 153.065-I
Window SignGround floor only8 sq ft (BSD Historic Transition); generally 20% of cumulative window area per window elsewhere; plus small sign at main entrance allowedSee small sign entrance allowance, plus specifics per codeOn window; ground floor onlyUnlock§ 153.065(H)(7)(b); Table 153.065-I
Ground Sign8 ft (all BSD except Historic Transition); 6 ft (BSD Historic Transition)24 sq ft (all BSD except Historic Transition); 8 sq ft (BSD Historic Transition)8 ft min1 per building/parcel per street frontage (max 2), additional for corner lots per code8 ft from min required building zone, setback, or street ROW; different street frontage for multiple ground signsUnlockTable 153.065-H; § 153.065(H)(7)(a)
Building Identification Sign (for buildings 3 or more stories, not BSD Historic Transition)Shall not extend above roofline100 sq ft1 per building/street frontage, max 2Façade facing streetUnlockTable 153.065-J; § 153.065(H)(7)(c)
Directory SignGround floor only4 sq ft1 per public entranceMounted flat to wall within 6 ft of entranceUnlockTable 153.065-K
Sandwich Board Sign3 ft6 sq ft per side1 per ground floor tenantWithin 6 ft of primary ground floor entrance, on sidewalk, must not block accessUnlockTable 153.065-K

BSD Historic Core

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall Sign15 ft (not above roofline)8 sq. ft.Two types permitted per façade, not two of the same typeOn wall facing public streetUnlock§ 153.065(H)(7)(b); Table 153.065-I; § 153.065(H)(6)(d)
Awning Sign15 ft; min 8 ft above sidewalk8 sq. ft.1 per awning/tenantFlat to awning face, no overhang beyond awning edgeUnlock§ 153.065(H)(7)(b); Table 153.065-I; § 153.065(H)(6)(d)
Projecting Sign15 ft (not above 2nd story window sill or roofline); min 8 ft above sidewalk8 sq. ft.As per code, subject to combination limitsWithin 6 ft of principal entranceUnlock§ 153.065(H)(7)(b); Table 153.065-I; § 153.065(H)(6)(d)
Window SignGround floor only8 sq. ft. per window; 1 sq. ft. at entrance (exempt)1 per window; entrance sign exemptOn window, ground floorUnlock§ 153.065(H)(7)(b); Table 153.065-I; § 153.065(H)(6)(d)
Ground Sign6 ft8 sq. ft.8 ft minPer sign type/tenant, up to a maximum per lot frontage per codeMin 8 ft from ROW or lot line; attached to freestanding wall or like structureUnlockTable 153.065-H; § 153.065(H)(7)(a); § 153.065(H)(6)(d)
Directory SignGround floor only4 sq ft1 per public entranceWithin 6 ft of entranceUnlockTable 153.065-K; § 153.065(H)(7)(d)
Sandwich Board Sign3 ft6 sq ft per side1 per ground floor tenantWithin 6 ft of public entrance, on sidewalk with 5 ft clear passageUnlockTable 153.065-K; § 153.065(H)(7)(d)

PermitPal covers all 10 zoning districts in Dublin — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 10 zones for Dublin — start free

Prohibited Signs in Dublin

  • Off-premise signs are prohibited unless specifically allowed by master sign plan approval in BSD districts.
  • All of the following are prohibited: trailblazer signs, externally visible neon/neon look-alike signs, trailer signs, search lights, laser lights, pennants, streamers, spinners, bench signs, portable signs (except sandwich board), roof signs, billboards, changeable copy signs (except as expressly permitted), flashing signs, projected images and animated signs, signs with moving or movable parts, and any look-alike version of any of these prohibited sign types.
  • Signs that resemble the color, shape, design, or other characteristics of any government traffic control, directional, or warning sign are prohibited.
  • No sign shall obstruct the view of approaching/intersecting traffic or interfere with safe vehicle/pedestrian movement near right-of-way.
  • Signs are prohibited in public right-of-way, unless specifically authorized by applicable code and the City Engineer.
  • Signs are prohibited in utility easements, no-build zones, public parks, or on any public property (except as otherwise permitted).
  • Signs may not be installed on traffic control signs, construction signs, fences, utility poles, street signs, trees, or other natural objects.
  • Signs may not be placed on any property without the prior authorization of the property owner.
  • Externally visible neon and neon look-alike signs are prohibited universally.
  • No sign shall be located in any residential area except as expressly permitted.
  • No sign may be installed in a location creating a safety hazard or interfering with traffic visibility.
  • No sign shall show exposed wiring or structural elements except as designed.

Exempt Signs in Dublin

  • Permanent flags meeting pole height and area limits and with foundation permit for poles.
  • Governmental signs as consolidated and color-limited unless otherwise required by government regulation. If in right-of-way, approval is required by City Engineer.
  • Street address signs aiding first responders and meeting dimension, contrast, and location standards. These are required for every building.
  • Private traffic and on-site directional signs (max 4 sq ft area, 3 ft height), without advertising/logos, rectangular, located on same property, not in right-of-way.
  • Residential information signs displaying necessary safety/convenience info only, max 2 sq ft, no advertising.
  • Security system signs, max 1 sq ft area.
  • Barber poles per state law, not exceeding 28 inches in height.
  • ATM signage up to 1 sq ft, color limited, with logo illumination and orientation restrictions.
  • Residential sale or leasing period signs (for sale/lease signs in residential areas), for premises actively offered for sale or lease, not requiring a sign permit but subject to other code provisions and size/placement/duration restrictions.
  • Seasonal decorations (temporary), without a sign permit, subject to safety and lighting standards.
  • Model home period signs, temporary, not requiring a variance or special meeting.
  • Other temporary signs, subject to general restrictions, not requiring a sign permit, with number/size/height/duration limits.

Sign Plan & Submission Notes for Dublin

  • A Master Sign Plan is required in the BSD Sawmill Center Neighborhood, Indian Run Neighborhood, and Scioto River Neighborhood districts for buildings within designated shopping corridors; submission is required prior to or concurrent with site plan review.
  • A Master Sign Plan is required for projects in the Bridge Street District (BSD) meeting the criteria of § 153.066(K)(1)(d).
  • A Master Sign Plan may be requested for any project within BSD and permits flexibility in sign regulations; it is reviewed and approved by the Planning and Zoning Commission.
  • A total sign plan is required for multi-tenant buildings or complexes before issuance of any individual tenant or complex sign permit.
  • For drive-thru menu board signs, a total sign plan conforming to all code requirements must be submitted and approved before issuance of a permit; if not code-compliant, the sign plan is reviewed by the required reviewing body.
  • Master sign plans in BSD may allow alternative sign types, numbers, size, heights, locations, colors, or lighting, if approved.
  • For any variation from the code for signage (i.e., not meeting code standards), a master sign plan or sign variance/waiver may be required and is subject to review by the appropriate reviewing body.
  • A sign permit is otherwise required for all non-exempt signs as part of site plan or development review.

Source: amlegal municipal code