Questions? Call us at (262) 218-2915

Sign Regulations in Riverside, Ohio

Riverside, Ohio has specific sign regulations covering 24 sign types across 5 zoning districts. Regulated sign types include Directional Sign, Wall Sign (General Standards), Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Riverside, Ohio

Sample Sign Requirements in Riverside

Sign TypeMax HeightMax AreaSetback
Directional Sign3 ft within 25 ft of right-of-way; 8 ft elsewhere2 sq ft (per sign face), up to 4 sq ft (total)Not listed
Projecting Sign8 ft above sidewalks; 15 ft above drivewaysNot listedNot listed
Temporary Sign (Noncommercial)4 ft12 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for RiversideFull Coverage

Sign Types Covered

24

  • Directional Sign
  • Wall Sign (General Standards)
  • Projecting Sign
  • Temporary Sign (Noncommercial)
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Riverside

City WebsiteMunicipal Code4 permit application links available

Frequently Asked Questions

In Riverside, the height limit for Ground Sign (Neighborhood Identification) in the Residential Districts, Residential Zoning Districts (R-1, R-2, R-3, R-4) is 6 ft (Sec. 1115.09.F.1.b). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Riverside require a permit. From the submission notes on this page: A sign permit is required before a neighborhood identification ground sign may be constructed; plans for all neighborhood identification signs, including location, fences, walls or earth mounds and landscaping, must be submitted for approval. Run a code check for an exact address to see the permit requirements for that zone.

Riverside's sign code covers 24 sign types, including Directional Sign, Wall Sign (General Standards), Projecting Sign, and Temporary Sign (Noncommercial). Most commercial signs need a permit. The ordinance lists 6 exemptions. One of them: Temporary real estate signs conforming to section requirements do not require a sign permit. The full list is on this page.

This page doesn't list a single setback distance for signs in Riverside. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Riverside's sign ordinance that cover digital, changing, or flashing signs: Any sign utilizing an artificial illumination device which radiates intensity, beam spread, glare, flashing, blinking or color which interferes with the vision of persons not on the premises. No sign shall incorporate movement or the illusion of movement or incorporate reflective materials creating the illusion of flashing or moving lights (for business, industrial, or nonresidential uses). Electronic Message Centers (EMCs) require manufacturer certification as part of a sign permit request to ensure compliance with illumination standards. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Riverside Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Riverside, Ohio, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Riverside, Ohio Sign Rules at a Glance

Riverside, Ohio regulates 24 sign types across 5 zoning districts. Ground Signs (Neighborhood Identification) in the Residential Districts, Residential Zoning Districts (R-1, R-2, R-3, R-4) are capped at 6 ft tall and 15 sq ft (Sec. 1115.09.F.1.b). Most commercial signs in Riverside require a permit.

Detailed Sign Ordinance Requirements for Riverside, Ohio

Sign Rules by Zoning District in Riverside (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones68 ft above sidewalks; 15 ft above driveways12 sq ftNot listed
Residential Districts, Residential Zoning Districts (R-1, R-2, R-3, R-4)56 ft15 sq ftNot listed
Multi Family Residential Use56 ft32 sq ft (face), 64 sq ft (area)Not listed
Business, Industrial, or Other Nonresidential Uses, Office and Business District, Business Districts (B-1, B-2), Light Industrial (I-1), Industrial Districts66 ft at minimum setback, add 1 ft for each additional 5 ft of setback (up to 16 ft max)32 sq ft (face), 64 sq ft (area)Not listed
Undeveloped or Agricultural Land, Agricultural Districts26 ft16 sq ftNot listed

Zone-by-Zone Sign Requirements in Riverside(sample of 3 of 5 zones)

Residential Districts, Residential Zoning Districts (R-1, R-2, R-3, R-4)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Single or Two Family Residential Use)Not listed4 sq ftNot listedNot listedOne per dwelling unitOn each dwelling unitNot listedUnlock1115.09.F.1.c
Ground Sign (Neighborhood Identification)6 ft15 sq ftNot listedNot listedOne per entranceAt entrance to neighborhood, fronting on thoroughfareNot listedUnlock1115.09.F.1.b
Temporary Ground Sign (Home Sale)4 ft6 sq ft (sign face), 12 sq ft (sign area)Not listedNot listedNot listedOutside public right-of-way (not subject to general ground sign setback)Not listedUnlock1115.09.F.1.d
Temporary Real Estate Sign (Single/Two Family)4 ft6 sq ft (sign face), 12 sq ft (sign area)Not listedNot listedOne per lot frontageGround signNot listedUnlock1115.09.D.23.b.2
Temporary Noncommercial Sign (Residential District)Not listed12 sq ftNot listedNot listedNot listedOn private propertyNot listedUnlock1115.09.D.23.c

Multi Family Residential Use

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Multi Family Residential Use)Not listed4 sq ftNot listedNot listedOne per premises, max; split counts as optionNot listedNot listedUnlock1115.09.F.2.a, 1115.09.F.2.b
Ground Sign (Multi Family Residential Use)6 ft32 sq ft (face), 64 sq ft (area)Not listedNot listedOne per premises (two if split; max area applies total)At entrance(s) to development, on fence, wall, or mound, landscapedNot listedUnlock1115.09.F.2.b
Temporary Sign (Multi Family Residential Use)6 ft12 sq ft (sign face), 24 sq ft (sign area)Not listedNot listedNot listedNot listedNot listedUnlock1115.09.F.2.c
Temporary Real Estate Sign (Multi Family Residential Use)6 ft12 sq ft (frontage ≤ 100 ft), 32 sq ft (frontage > 100 ft), 64 sq ft (frontage ≥ 200 ft)Not listedNot listedOne per lot frontageOne per lot frontage; ground sign onlyNot listedUnlock1115.09.D.23.b.3
Temporary Noncommercial Sign (Multi Family Residential Use)Not listed12 sq ft (residential); for nonresidential see relevant zoneNot listedNot listedNot listedOn private propertyNot listedUnlock1115.09.D.23.c

Business, Industrial, or Other Nonresidential Uses, Office and Business District, Business Districts (B-1, B-2), Light Industrial (I-1), Industrial Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground/Projecting Sign6 ft at minimum setback, add 1 ft for each additional 5 ft of setback (up to 16 ft max)32 sq ft (face), 64 sq ft (area)Not listedOutside of public right-of-way; for additional height, 1 ft added per 5 ft additional setbackOne per premisesOn premises; setback outside right-of-wayNot listedUnlock1115.09.G.2
Wall Sign (Business, Industrial, Other Nonresidential)Not listed1.5 sq ft per linear ft of building frontage (up to 50 sq ft per sign on multi-tenant buildings)Not listedNot listedMaximum 3 per frontage; 1 per tenant for multi-tenant structures above entranceOn building frontage; for multi-tenant, above primary entranceNot listedUnlock1115.09.G.3
Temporary Ground Sign (Business, Industrial, Nonresidential)6 ft16 sq ft (face), 32 sq ft (area)Not listedNot listedNot listedNot listedNot listedUnlock1115.09.G.5.a
Temporary Wall Sign (Business, Industrial, Nonresidential)Not listed16 sq ftNot listedNot listedOne per frontageOn building frontageNot listedUnlock1115.09.G.5.b
Temporary Real Estate Sign (Nonresidential/Undeveloped)6 ft12 sq ft (≤100 ft frontage), 32 sq ft (>100 ft frontage), 64 sq ft (≥200 ft frontage)Not listedNot listedOne per lot frontageGround sign only; one per lot frontageNot listedUnlock1115.09.D.23.b.3
Temporary Noncommercial Sign (Nonresidential District)Not listed16 sq ftNot listedNot listedNot listedOn private propertyNot listedUnlock1115.09.D.23.c

PermitPal covers all 5 zoning districts in Riverside. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Riverside

  • Any sign placed in any public right-of-way except publicly owned signs such as traffic control signs and directional signs.
  • Any sign or part thereof which is erected within or above a public right-of-way.
  • Any sign erected at or near any intersection in such a manner as to obstruct free and clear vision, or where by reason of position, shape, or color, it may interfere with, obstruct the view of, or be confused with any authorized traffic sign, signal or device.
  • Any sign making use of the word 'stop', 'look', 'danger', or other word or symbol in such a manner as to interfere with, mislead, or confuse traffic.
  • Any sign mounted onto, above, or incorporated into, the roof of any building unless otherwise specifically permitted.
  • Any lighter than air or inflatable sign situated on, attached or tethered to a premises, structure, or vehicle. Exception: a balloon up to but not exceeding 24 inches in any dimension on specific residential premises if not displayed in conjunction with any other sign.
  • Any sign with visible moving, revolving, rotating parts, visible mechanical movement, non-constant visual image, or appearance of motion.
  • Any sign utilizing an artificial illumination device which radiates intensity, beam spread, glare, flashing, blinking or color which interferes with the vision of persons not on the premises.
  • Any sign utilizing a fixed or mobile beacon, strobe light, searchlight, signaling light, spotlight or similar device directed above or outside of a premises to attract unusual visual attention.
  • Any sign or part thereof utilizing flame as a source of light.
  • Any sign utilizing an energized lamp bulb where the bulb's surface is directly visible to persons not on the premises.
  • Any sign conveying misleading or unlawful commercial information.
  • Any sign conveying visual information that is obscene, indecent, or immoral.
  • Any sign mounted on or attached to a vehicle.
  • A portable sign.
  • Temporary signs in the right-of-way except publicly owned signs such as traffic control signs and directional signs.
  • A sign in dangerous or defective condition on any premises.
  • No sign shall be located in such a manner as to be primarily viewed from residential property (for business/industrial uses).
  • No sign shall incorporate movement or the illusion of movement or incorporate reflective materials creating the illusion of flashing or moving lights (for business, industrial, or nonresidential uses).
  • All signs must convey a static, fixed message; message must remain as a constant visual image for at least ten minutes.
  • No sign or part thereof shall be illuminated by or contain flashing, intermittent, rotating, or moving lights, or be illuminated in a way that causes glare or reflection that may constitute a traffic hazard or other nuisance.
  • Signs visible from streets shall not contain symbols or words, or red and green lights that resemble highway traffic signs or devices.
  • No placement of any small cell facility or wireless support structure shall necessitate tree trimming, cause removal of, or otherwise damage any tree located within the City's right-of-way or utility easement; no such facility shall be located within the eventual mature dripline or tree crown of any such tree.

Exempt Signs in Riverside

  • Flags (noncommercial), emblems, and insignia of any governmental agency, subdivision, and temporary displays of a patriotic, religious, charitable or civic character, political signs, and real estate signs are exempted from required permitting.
  • Temporary real estate signs conforming to section requirements do not require a sign permit.
  • Window signs located in a building where a commercial or industrial use is permitted as a principal use, provided not more than 50% of the area of any window is devoted to window signage, are exempt from most provisions except the prohibited sign characteristics.
  • A balloon measuring up to but not exceeding 24 inches in any dimension on a residential premises (single, two, three to four family dwelling unit) is exempt provided said balloon is not displayed in conjunction with any other sign as defined by the UDO.
  • Temporary noncommercial signs located on private property, within specified size limits, are exempt from permit requirements.
  • Publicly owned signs such as traffic control signs and directional signs are exempt from prohibition on sign placement in the public right-of-way.

Sign Plan & Submission Notes for Riverside

  • A Certificate of Zoning Compliance (CZC) must be obtained for erection, construction, relocation, or alteration of any sign unless exempted by the Planning and Program Management Department.
  • A sign shall be designed, erected, altered, reconstructed, moved and maintained in accordance with the provisions of Section 1115.09 unless specifically modified by another section of the Ordinance.
  • A sign permit is required before a neighborhood identification ground sign may be constructed; plans for all neighborhood identification signs, including location, fences, walls or earth mounds and landscaping, must be submitted for approval.
  • Written permission from the Director of Planning and Program Management (DPPM) and a CZC is required before a ground sign may be exchanged for a wall sign for business, industrial, or other nonresidential uses.
  • Plans for all ground signs, including all fences, walls, earth mounds, and landscaping, must be submitted for approval for multi-family residential developments wanting to split a ground sign into two signs.
  • Sign permits are not required for temporary real estate signs conforming to defined size and use standards.
  • If a request is made for a sign plan not meeting standards, a waiver or variance may be required under Chapter 1105 procedures.
  • Electronic Message Centers (EMCs) require manufacturer certification as part of a sign permit request to ensure compliance with illumination standards.

Source: municode municipal code