Sign Regulations in Enid, Oklahoma

Enid, Oklahoma has specific sign regulations covering 18 sign types across 7 zoning districts. Regulated sign types include Freestanding Sign, Wall Sign, Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 19, 2025

Sign Regulation Overview for Enid, Oklahoma

Sample Sign Requirements in Enid

Sign TypeMax HeightMax AreaSetback
Freestanding Sign35 ft150 sq ft
Wall Sign50% wall area
Projecting Sign40 sq ft

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for EnidFull Coverage

Sign Types Covered

18

  • Freestanding Sign
  • Wall Sign
  • Projecting Sign
  • Window Sign
  • +2 more types

Zoning Districts

7

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Enid, monument signs are limited to 35 ft. Height limits vary by zoning district and sign type. Use PermitPal to get exact requirements for your specific location.

To get a sign permit in Enid, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Enid, regulated sign types include Freestanding Sign, Wall Sign, Projecting Sign, Window Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Enid vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Enid are regulated with specific requirements for brightness, animation, and message duration. Enid has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Enid Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Enid, Oklahoma sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Enid, Oklahoma Sign Rules at a Glance

Enid, Oklahoma regulates 18 sign types across 7 zoning districts. Feather Flags in the General Regulations For All Zones zoning district are capped at 8 ft tall, 8 ft tall, 27 inches wide, and 27 in wide (Sec. § 11-13-11(H)(3)(a)-(b)). Most commercial signs in Enid require a permit.

Detailed Sign Ordinance Requirements for Enid, Oklahoma

Sign Rules by Zoning District in Enid (7 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones1035 ft150 sq ft
Residential Zoning Districts615 ft6 sq ft per entry
Commercial Zoning Districts, Industrial Zoning Districts535 ft150 sq ft (see also sign area calculation rules by frontage)
Agricultural Districts210 ft48 sq ft
Planned Unit Development (PUD)1
Enid Downtown Overlay District520 ft (25 ft for Garriott Road frontages)32 sq ft
Historic Preservation Districts1

Zone-by-Zone Sign Requirements in Enid(sample of 3 of 7 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Freestanding Sign35 ft150 sq ft1 per frontage1 per frontage; not within 50 ft of another sign at adjacent property/business; cannot overhang easement/right-of-way/vehicular driveUnlock§ 11-13-11(A); § 11-13-6; § 11-13-3(I); § 11-13-7(B)
Wall Sign50% wall areaOn outside wall of buildingUnlock§ 11-13-11(D); § 11-13-6; § 11-13-3(I)
Projecting Sign40 sq ft1 per building/occupancyOn building; may extend up to 8 ft from buildingUnlock§ 11-13-11(E)
Window SignWindow, visible from exteriorUnlock§ 11-13-11(F); § 11-13-4(W)
Wind Resistant (Swinger) Sign20 sq ft1 per 100 linear feet of frontageOn premisesUnlock§ 11-13-11(G)
Temporary Sign8 sq ft for residences; 32 sq ft on other property (unless otherwise provided); some feather flags excludedSee aboveOn premises; not in right-of-way/easement; must not impair sight triangle or intersection visibilityUnlock§ 11-13-11(H)
Feather Flag8 ft8 ft tall, 27 inches wide27 inSee additional requirementsOn premises; location per frontage/linear feet of buildingUnlock§ 11-13-11(H)(3)(a)-(b)
Electronic Message Center (EMC)72 sq ftOn freestanding sign structureUnlock§ 11-13-11(C)

Residential Zoning Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Subdivision Identification)15 ft1 per entryAt subdivision street entry; 1 per entryUnlock§ 11-13-9(A)(1), (3), (5)-(6)
Wall Sign (Subdivision Identification)15 ft1 per entryMounted on subdivision screening wall, at street entry; 1 per entryUnlock§ 11-13-9(A)(1), (3), (5)-(6)
Freestanding Sign (Multi-family Identification)1 per entryAt each street entryUnlock§ 11-13-9(A)(2), (6)
Wall Sign (Multi-family Identification)1 per entryAt each street entryUnlock§ 11-13-9(A)(2), (6)
Wall Sign (For Lease - Multi-family)6 sq ft per entry1 per entryAt each street entryUnlock§ 11-13-9(A)(2)
Wall Sign (Single Family/Duplex Lot Identification)3 sq ft (lots <1 acre); 6 sq ft (lots >1 acre)1 per lotOn buildingUnlock§ 11-13-9(A)(4)

Commercial Zoning Districts, Industrial Zoning Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Freestanding Sign35 ft150 sq ft (see also sign area calculation rules by frontage)1 per frontageOn propertyUnlock§ 11-13-9(B)(3)(a); § 11-13-11(A), (E)(2)(a)
Projecting Sign40 sq ft1 per building/occupancyOn exterior wall/building; may extend up to 8 ft from buildingUnlock§ 11-13-9(B)(3)(b); § 11-13-11(E)
Wall Sign50% of exterior wall area to which attachedOn exterior wall of buildingUnlock§ 11-13-9(B)(3)(c); § 11-13-11(D)
Window SignWindow, visible from exteriorUnlock§ 11-13-9(B)(3)(d); § 11-13-11(F)
Wind Resistant (Swinger) Sign20 sq ft1 per 100 linear ft frontageOn premisesUnlock§ 11-13-9(B)(3)(e); § 11-13-11(G)

PermitPal covers all 7 zoning districts in Enid — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 7 zones for Enid — start free

Prohibited Signs in Enid

  • Signs that interfere with the flow of pedestrians on sidewalks.
  • Flashing signs.
  • Signs with strobes that are visible from the street.
  • Pallet signs.
  • New billboards.
  • New off premises signs.
  • Signs affixed to trees or utility poles or traffic devices.
  • Vehicle signs.
  • No sign shall be maintained at any location where, by reason of its position, size, shape or color, it may interfere with or be confused with any traffic control signs or signals, or may mislead or confuse traffic.
  • Signs and their supporting structures shall not interfere with aboveground or underground facilities and utilities or surface/subsurface drainage.
  • No sign shall be installed or erected on, over, or extending across any public right-of-way, alley, easement, or vehicular driveway, unless otherwise specified.
  • No sign may be attached to any tree; only public service signs may be attached to utility poles.
  • No sign shall occupy a required parking space.
  • No sign shall obstruct any fire escape, window, door, or opening used for egress, or be attached to a fire escape or interfere with required ventilation openings.
  • No sign shall have an overhead electrical system.
  • No sign shall be placed or displayed within the public right-of-way or easement.
  • No sign shall be placed so as to impair a sight triangle or visibility at intersections, streets, driveways, and alleys.
  • No sign shall be erected, constructed, or maintained so as to obstruct the egress or ventilation required by law.
  • Abandoned signs must be removed within 30 days of abandonment.
  • Signs that do not comply with the applicable International Building Code and Electrical Code are prohibited.
  • No sign shall flash, pulsate, or cause glare unless specifically permitted.
  • Any prohibited sign is subject to removal and owner subject to a fine.

Exempt Signs in Enid

  • Official flags that meet area and height limits.
  • Memorial signs or tablets, names of buildings, and other memorial signs or plaques made of certain materials and within size limits.
  • Non-illuminated bulletin board signs not exceeding 20 square feet for public, charitable, or religious institutions on their premises.
  • Signs mounted inside buildings not visible to pedestrians or motorists beyond the lot boundaries.
  • Street address numerals not more than 20 square feet.
  • Scoreboards in athletic facilities.
  • Directional signs for public convenience within 10 square feet.
  • Public use signs (traffic control, street name, utility info, etc.) erected by a public officer or for public benefit.
  • No trespassing or property use regulation signs not more than 8 square feet.
  • Construction signs within size limits.
  • Home occupation signs or nameplates not more than four square feet attached to the building, denoting only the occupant or service.
  • Vacancy signs for apartments, hotels, motels not more than 10 square feet, not flashing or glaring or animated.
  • Temporary placards or posters (e.g., garage sale signs) not more than four square feet in area, max two per property.
  • Temporary decoration signs.
  • Menu signs at drive-through/in restaurants not designed to attract attention from the public right-of-way.
  • Changing the advertising copy or message on existing changeable copy signs or billboards.
  • Repainting, cleaning, or routine maintenance of signs not involving structural or size changes.
  • Gas island signs within specified dimensions, max one per island.
  • Sale and open house real estate and estate sale signs located on the property.
  • Vance Air Force Base billboard signs within specific size/height/max overhang and contractor requirements.
  • Political signs.
  • A-frame signs.
  • Window signs.
  • Replacement of a face in a freestanding sign.
  • Small gardening or crop signs designating plant or seed type.

Sign Plan & Submission Notes for Enid

  • A site plan indicating locations of all existing and proposed signs and their dimensions on the site is required as part of a sign permit application.
  • A building facade outline or photograph indicating the location of any existing or proposed signs to be attached to the building is required with the sign permit application.
  • For Planned Unit Developments (PUD), signage is governed by a development plan once approved by the City Council.
  • Historic Preservation Districts require sign applications to be reviewed by the Historic Preservation District Commission before a permit is issued (unless the commission does not act within 60 days).
  • A variance from sign regulations is processed by the Board of Adjustment through a required meeting/hearing per § 11-3-7(B).
  • If the sign ordinance is perceived as impeding economic development, cases may be brought before the City Council for review and approval, with submittal at least 15 days before the meeting.