Sign Regulations in Midwest City, Oklahoma

Midwest City, Oklahoma has specific sign regulations covering 26 sign types across 4 zoning districts. Regulated sign types include Construction Sign, Real Estate Sign (Nonarterial Street), Real Estate Sign (Arterial Street). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Sign Regulation Overview for Midwest City, Oklahoma

Sample Sign Requirements in Midwest City

Sign TypeMax HeightMax AreaSetback
Subdivision Identification Sign32 sq ft
Construction Sign8 sq ft
Real Estate Sign (Nonarterial Street)8 sq ft

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Midwest CityFull Coverage

Sign Types Covered

26

  • Construction Sign
  • Real Estate Sign (Nonarterial Street)
  • Real Estate Sign (Arterial Street)
  • Political Sign (Nonarterial Street)
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Midwest City

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

Sign height limits in Midwest City vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Midwest City, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Midwest City, regulated sign types include Construction Sign, Real Estate Sign (Nonarterial Street), Real Estate Sign (Arterial Street), Political Sign (Nonarterial Street), and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Midwest City vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Midwest City are regulated with specific requirements for brightness, animation, and message duration. Midwest City has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Midwest City Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Midwest City, Oklahoma sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Midwest City, Oklahoma Sign Rules at a Glance

Midwest City, Oklahoma regulates 26 sign types across 4 zoning districts. Freestanding Signs in the Multifamily zoning districts, Office zoning districts, Commercial zoning districts, Industrial zoning districts zoning district are capped at 20 ft tall and 200 sq ft per face, with a Not within right-of-way; not nearer than property line setback (Sec. Sec. 9-386). Most commercial signs in Midwest City require a permit.

Detailed Sign Ordinance Requirements for Midwest City, Oklahoma

Sign Rules by Zoning District in Midwest City (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential zoning districts, Mobile home zoning districts950 sq ft
Multifamily zoning districts, Office zoning districts, Commercial zoning districts, Industrial zoning districts1620 ft500 sq ft
Civic center area8Up to 20 ftUp to 200 sq ft
General Regulations For All Zones34 sq ft

Zone-by-Zone Sign Requirements in Midwest City(sample of 3 of 4 zones)

Residential zoning districts, Mobile home zoning districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Subdivision Identification Sign32 sq ftOne per immediate entranceAt each immediate entrance to the subdivisionUnlockSec. 9-384(h)(13)
Construction Sign8 sq ftOne per frontagePer frontage during period of constructionUnlockSec. 9-384(h)(10)
Real Estate Sign (Nonarterial Street)8 sq ftOne per frontagePer frontage and only for sale or lease of the propertyUnlockSec. 9-384(h)(11)
Real Estate Sign (Arterial Street)32 sq ftOne per frontagePer frontage and only for sale or lease of the propertyUnlockSec. 9-384(h)(11)
Political Sign (Nonarterial Street)8 sq ftNo setback required on nonarterial; 12 ft on arterialOne per street frontage per candidate/issueOn parcel with setback as detailed in ordinanceUnlockSec. 9-384(h)(16),(17), Sec. 9-393
Political Sign (Arterial Street)32 sq ft12 ft from curbOne per street frontage per candidate/issueOn parcel with at least 12 ft setback from curbUnlockSec. 9-384(h)(16),(17), Sec. 9-393
Subdivision Construction Sign50 sq ftOne per frontagePer frontage of the subdivisionUnlockSec. 9-384(h)(12)
Professional Nameplate2 sq ftOn the buildingUnlockSec. 9-384(h)(21)

Multifamily zoning districts, Office zoning districts, Commercial zoning districts, Industrial zoning districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Freestanding Sign20 ft200 sq ft per faceNot within right-of-way; not nearer than property lineOne per frontage, one per 600 ftNot within 2 ft of building/structure; not within right-of-wayUnlockSec. 9-386
Roof Sign20 ft above roof500 sq ft or 75% of building frontOn roof of buildingUnlockSec. 9-389
Projecting Sign (Horizontal)50 sq ft per sideNo over setback lineAt least 8 ft above sidewalk, not more than 2 ft from wallUnlockSec. 9-390(d)(1),(f)
Projecting Sign (Vertical)100 sq ft per sideNo over setback lineAt least 8 ft above sidewalk, not more than 2 ft from wallUnlockSec. 9-390(d)(2),(f)
Commercial Temporary Sign3 ft16 sq ft2 ft in any dimensionUnlockSec. 9-391(a),(g)
Construction Sign50 sq ftOne per frontagePer frontage during constructionUnlockSec. 9-384(h)(10)
Political Sign (Nonarterial Street)8 sq ftNo setback required on nonarterial; 12 ft on arterialOne per street frontage per candidate/issueOn parcelUnlockSec. 9-384(h)(16),(17), 9-393
Political Sign (Arterial Street)32 sq ft12 ft from curbOne per street frontage per candidate/issueAt least 12 ft from curbUnlockSec. 9-384(h)(16),(17), 9-393

Civic center area

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Identification Nameplate2 sq ftOn buildingUnlockSec. 9-385(z)(1)b
Real Estate Sign8 sq ftOn property within the districtUnlockSec. 9-385(z)(1)a
Bulletin Board Sign8 sq ftOn institution premises in Civic Center AreaUnlockSec. 9-385(z)(1)c
Construction Sign16 sq ftOn property where construction occurs in the Civic Center AreaUnlockSec. 9-385(z)(1)d
Occupational Sign2 sq ftOn commercial building, institutional building, or residenceUnlockSec. 9-385(z)(1)e
Memorial Sign/Building Name Plaque6 sq ftOn buildingUnlockSec. 9-385(z)(1)f
Storefront/Primary Use Sign (within 200 ft of Civic Center)10 ft40 sq ftWithin 200 ft of Civic Center areaUnlockSec. 9-385(z)(3)b,c
Signs beyond 200 ft from Civic CenterUp to 20 ftUp to 200 sq ftFrom 200 ft to 800 ft from Civic Center property lineUnlockSec. 9-385(z)(3)d

PermitPal covers all 4 zoning districts in Midwest City — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 4 zones for Midwest City — start free

Prohibited Signs in Midwest City

  • No sign shall be maintained at any location where, by reason of its position, size, shape or color, it may interfere with the view of or be confused with any traffic control signs or signals, or where it may mislead or confuse traffic.
  • Signs and their supporting structures shall not interfere with above ground and underground facilities and conduits for water, sewer, gas, electricity, communications, nor interfere with surface or subsurface drainage.
  • No permanent sign shall be installed, erected or maintained that is on or a part of which is on, over or extended across any public right-of-way, alley, utility or drainage easement, or any vehicular driveway, except as specifically provided for existing buildings.
  • No sign, except public service signs, shall be permitted to be located on publicly-owned property except within city athletic complexes and in conformity with established policies.
  • No sign shall obstruct any entrance or exit.
  • No sign shall be constructed of or contain glass or plastic below eight feet in height in athletic complexes.
  • No sign may be attached to a tree or placed on public property. Only public service signs may be attached to utility poles.
  • No sign shall occupy a required parking space.
  • No sign or advertising structure shall be erected at street intersections so as to obstruct vision or to be confused with or interfere with authorized traffic signs/signals/devices.
  • No sign shall be erected, constructed or maintained to obstruct a fire escape, window, door or opening used as a means of egress, nor attached to a standpipe, nor interfere with required ventilation.
  • No sign shall be located within a sight triangle; except one pole or column is allowed within certain height and width restrictions.
  • No political sign shall exceed thirty-two square feet in display surface area.
  • No sign shall be placed or erected in violation of city zoning ordinances.
  • No permanent sign, except subdivision identification signs, shall be allowed, installed, erected, or maintained on property zoned R-1-D, R-1-A, R-2, R-MH-1, or R-MH-2 unless subject to a special use permit or owned/operated by a political subdivision.
  • Permanent off-premises advertising signs are allowed only in industrial zoning districts.
  • No sign shall be maintained in a deteriorated or hazardous condition.
  • No sign shall be constructed without meeting wind loading, construction, and material standards.
  • The following types of signs are prohibited: 'A' frame signs; swinging signs (except residential property); flashing signs; portable signs.
  • No sign shall display obscene, indecent, or immoral matter.
  • No sign shall be placed or erected on utility poles or in the public right-of-way (unless permitted public service signs).
  • Balloons shall not be used as commercial temporary signs.
  • No sign shall be erected, placed or maintained in such manner as to create a traffic hazard.

Exempt Signs in Midwest City

  • Signs mounted inside buildings not visible to pedestrians or motorists beyond the boundaries of the lot or parcel upon which they are located or from any public right-of-way, parking area or public outdoor area.
  • Window displays, including neon signs, if such signs are prewired and/or prefabricated.
  • Street addresses and/or nameplates not exceeding a total of fifty square feet in display surface area.
  • Memorial signs or names of buildings and dates of erection when cut into masonry or constructed of bronze or other noncombustible material and not exceeding six square feet.
  • Scoreboards not exceeding fifty square feet in athletic facilities.
  • Nonilluminated bulletin board signs for public institutions or nonprofits located on their premises and not more than twenty square feet.
  • Directional signs not exceeding four square feet, for the convenience of the public (entrances, parking, restrooms, handicapped spaces, etc.).
  • Public use or public service signs (traffic control, street name, community/public utility info, safety, danger, public duty).
  • Regulatory property use signs (No Trespassing, etc.) not more than four square feet.
  • One construction sign per frontage, not more than fifty square feet (multifamily, mobile home, office, commercial, industrial) or eight square feet (other residential).
  • One real estate sign per frontage advertising the sale/lease/rental, not more than eight square feet (nonarterial) or thirty-two square feet (arterial).
  • One subdivision construction sign per frontage advertising the entire subdivision and not more than fifty square feet.
  • One subdivision identification sign per immediate entrance, containing only the subdivision's name, indirectly illuminated and not more than thirty-two square feet.
  • No more than two on-premises and two off-premises garage or estate sale signs, removed within 24 hours of sale completion.
  • Decorations customary and incidental to holidays.
  • No more than one political sign per street frontage per land parcel per candidate/issue, if placed no closer than twelve feet to the curb on arterial streets and removed within three days after election, and not more than eight square feet (nonarterial) or thirty-two square feet (arterial).
  • Political signs with the same size and removal requirements as above for residentially-zoned versus other parcels.
  • Menu signs at drive-through/drive-in restaurants, and attached signs on commercial property, if properly maintained, encased, two square feet or less, and not readable from the right-of-way.
  • Changing the advertising copy or message on an existing changeable copy sign.
  • Painting, repainting, cleaning or other normal maintenance/repair if not involving structural changes.
  • Professional nameplates not exceeding two square feet.
  • Searchlights for special events, located on the premises of the event.
  • Noncommercial temporary signs.

Sign Plan & Submission Notes for Midwest City

  • An application for a sign permit must include plans to scale showing the sign elevation, height, overall dimensions, colors, materials, illumination, wiring specifications, stress sheets/calculations, a site plan showing location and dimensions of all existing and proposed signs on the site, a building facade outline/photo showing existing/proposed sign locations, and other required info.
  • A site plan indicating all existing and proposed sign locations, heights, and dimensions must be submitted with the sign permit application.
  • A permit for each new sign, and for changes in location, sign type, electrification, or size, is required.
  • Permanent signs (except for those specifically exempted) require a permit and approval prior to display, erection, rebuilding, expansion, or relocation.
  • Appeals of administrative decisions about signs may be made to the city council within ten days, with notice to the applicant and abutting property owners, and a hearing is held.

Source: municode municipal code