Questions? Call us at (262) 218-2915

Sign Regulations in Sapulpa, Oklahoma

Sapulpa, Oklahoma has specific sign regulations covering 22 sign types across 10 zoning districts. Regulated sign types include Ground Sign, Temporary Construction Sign, Business Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Sapulpa, Oklahoma

Sample Sign Requirements in Sapulpa

Sign TypeMax HeightMax AreaSetback
Ground Sign (Principal Use)30 ft (can be up to 50 ft with additional setback)300 sq ftStreet setback per 821.3.A; 1 ft additional setback for every ft over 30 ft in height; Not permitted in street ROW
Bulletin Board15 ft12 sq ftNot listed
Identification Sign (Non-Residential Use)15 ft32 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for SapulpaFull Coverage

Sign Types Covered

22

  • Ground Sign
  • Temporary Construction Sign
  • Business Sign
  • Roof Sign
  • +2 more types

Zoning Districts

10

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Sapulpa

City WebsiteMunicipal Code4 permit application links available

Frequently Asked Questions

In Sapulpa, the height limit for Ground Sign (Principal Use) in the AG District is 30 ft (can be up to 50 ft with additional setback) (Sec. 921.4.A). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Sapulpa require a permit. From the submission notes on this page: No reference to a Master Sign Plan, sign plan, or variance meeting requirements is provided in this ordinance text for general sign regulations. Run a code check for an exact address to see the permit requirements for that zone.

Sapulpa's sign code covers 22 sign types, including Ground Sign, Temporary Construction Sign, Business Sign, and Roof Sign. Most commercial signs need a permit. The ordinance lists 11 exemptions. One of them: Signs located within buildings are not included in display surface area calculations. The full list is on this page.

This page doesn't list a single setback distance for signs in Sapulpa. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Sapulpa's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Sapulpa Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Sapulpa, Oklahoma, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Sapulpa, Oklahoma Sign Rules at a Glance

Sapulpa, Oklahoma regulates 22 sign types across 10 zoning districts. Bulletin Boards in the AG District are capped at 15 ft tall and 12 sq ft (Sec. 921.4.B.1). Most commercial signs in Sapulpa require a permit.

Detailed Sign Ordinance Requirements for Sapulpa, Oklahoma

Sign Rules by Zoning District in Sapulpa (10 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
AG District630 ft (can be up to 50 ft with additional setback)300 sq ftNot listed
Office Districts (OL, OM)3Height of building or 20 ft, whichever is lower160 sq ftNot listed
Central Business District (CBD)630 ft (add 1 ft setback per foot >30 ft, max 50 ft)100 sq ft per signNot listed
Commercial and Industrial Districts330 ft (add 1 ft setback/ft >30 ft, max 50 ft)300 sq ft per signNot listed
Commercial District (CS, CG)130 ft (add 1 ft setback per ft >30 ft, max 50 ft)300 sq ft per signNot listed
O District1Height of building or 20 ft, whichever is lower32 sq ftNot listed
IR District130 ft (add 1 ft setback per ft >30 ft, max 50 ft)300 sq ft per signNot listed
R Districts (RE, RS, RD, RM, RMH)515 ft64 sq ftNot listed
CH Commercial High Intensity District130 ft (add 1 ft setback per ft >30 ft, max 50 ft)300 sq ft per signNot listed
General Regulations For All Zones36 ft (including trailers)32 sq ftNot listed

Zone-by-Zone Sign Requirements in Sapulpa(sample of 3 of 10 zones)

AG District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign (Principal Use)30 ft (can be up to 50 ft with additional setback)300 sq ftNot listedStreet setback per 821.3.A; 1 ft additional setback for every ft over 30 ft in height; Not permitted in street ROWNot listedNot in ROW; abutting state/federal highways must meet state/federal regulationsNot listedUnlockSec. 921.4.A
Bulletin Board15 ft12 sq ftNot listedNot listed1 per street frontageEach street frontage of educational, religious, institutional, or similar useNot listedUnlockSec. 921.4.B.1
Identification Sign (Non-Residential Use)15 ft32 sq ftNot listedNot listed1 per street frontageEach street frontage of permitted non-residential useNot listedUnlockSec. 921.4.B.2
Temporary Construction Sign15 ft64 sq ftNot listedNot listed1 per street frontageEach perimeter street frontage of development under constructionNot listedUnlockSec. 921.4.B.3
Temporary Real Estate Sign - RM, RD15 ft8 sq ftNot listedNot listed1 per street frontageEach street frontage of a lot (RM, RD)Not listedUnlockSec. 921.4.B.4
Temporary Real Estate Sign - RS, RE6 ft4 sq ftNot listedNot listed1 per street frontageEach street frontage of a lot (RS, RE)Not listedUnlockSec. 921.4.B.4

Central Business District (CBD)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Portable Ground SignNot listedNot listedNot listedNot listedNot listedROW; minimum 10 ft from curb, 35 ft from intersectionsNot listedUnlockSec. 921.6.A.1
Projecting Roof and Canopy Signs10 ft above sidewalk, extend no closer than 18 in behind curb lineNot listedNot listedNot listedNot listedCan project over ROW with specified height/clearanceNot listedUnlockSec. 921.6.A.2
Ground Sign30 ft (add 1 ft setback per foot >30 ft, max 50 ft)100 sq ft per signNot listedIf over 30 ft tall, must be set back 1 ft per foot of height over 30 ft; max 50 ftNot listedNot listedNot listedUnlockSec. 921.6.C.1
Wall and Canopy SignNot listedNot listedNot listedNot listedNot listedBuilding wall/canopyNot listedUnlockSec. 921.6.C.2
Roof Sign12 ft above mean roof levelNot listedNot listedNot listedNot listedRoofNot listedUnlockSec. 921.6.B.2
Projecting Sign9 ft above mean roof levelNot listedNot listedNot listedNot listedProjecting from buildingNot listedUnlockSec. 921.6.B.3

R Districts (RE, RS, RD, RM, RMH)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Bulletin Board (Educational, Religious, Institutional)15 ft12 sq ftNot listedNot listed1 per street frontageEach street frontage of useNot listedUnlockSec. 921.4.B.1
Identification Sign (Permitted Non-Residential Use)15 ft32 sq ftNot listedNot listed1 per street frontageEach street frontage of useNot listedUnlockSec. 921.4.B.2
Temporary Construction Sign (RM, RD)15 ft64 sq ftNot listedNot listed1 per street frontageEach street frontageNot listedUnlockSec. 921.4.B.3
Temporary Real Estate Sign (RM, RD)15 ft8 sq ftNot listedNot listed1 per street frontageEach street frontageNot listedUnlockSec. 921.4.B.4
Temporary Real Estate Sign (RS, RE)6 ft4 sq ftNot listedNot listed1 per street frontageEach street frontageNot listedUnlockSec. 921.4.B.4

PermitPal covers all 10 zoning districts in Sapulpa. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Sapulpa

  • No sign or portion thereof shall be permitted in the right-of-way of any street or area designated in the Master Street Plan as a future street except authorized traffic signals, signs or devices.
  • No sign shall be located less than thirty-five (35) feet from the intersection of the pavement of two streets or from the intersection of street pavement and a railroad track.
  • No sign shall be located in such a manner as to obstruct or obscure or in any manner interfere with any traffic signal light or public warning sign.
  • Signs located in such a manner so as to prevent any motorist from obtaining a clear view of approaching vehicles for a distance of five hundred (500) feet along a public right-of-way are prohibited.
  • No business or outdoor advertising sign shall be located within fifty (50) feet of an R district if visible from such district.
  • Only constant light is permitted for sign illumination.
  • A minimum separation of fifty (50) feet is required between any two on-premises ground signs on the same frontage.
  • A minimum separation of five hundred (500) feet is required between any two off-premises ground signs, and also between any off-premises and on-premises ground sign on the same frontage (if the on-premises sign was located first).
  • No political campaign sign shall be erected more than forty-five (45) days prior to any election, nor remain on any property more than seven (7) days following an election.
  • No political campaign signs are permitted on public property and are permitted on private property only with the consent of the property owner.
  • The display surface area of each political campaign sign located in R or O zoning districts shall not exceed sixteen (16) square feet.
  • Vehicles with business identification signs cannot be parked and used as advertisements (temporary sign designation does not apply).
  • Temporary sign permits are limited to sixty (60) days, not more than one (1) permit in a six (6) month period per site.
  • Temporary signs must be located only on privately owned property and advertise products or services on the property where the sign is located.
  • Temporary sign maximum height is six (6) feet; maximum face area is thirty-two (32) square feet.
  • Temporary signs requiring electrical service must comply with the national electric code.

Exempt Signs in Sapulpa

  • Nameplates attached to the face of the wall and not exceeding two (2) square feet in surface area are not included in display surface area calculations.
  • Temporary real estate and construction signs are not included in display surface area calculations.
  • Signs not visible from a public street are not included in display surface area calculations.
  • Signs painted on glass surfaces of windows or doors, pertaining to the business conducted therein and in place sixty (60) days or less, are not included in display surface area calculations.
  • Tablets built into the wall of a building or other structure and used for inscriptions, memorial tablets, or similar purposes, are not included in display surface area calculations.
  • Signs of warning, directive, or instructional nature erected by a public agency, franchised transportation company, or governmental agency are not included in display surface area calculations.
  • Legal notices and street numbers are not included in display surface area calculations.
  • Election campaign signs, if erected not more than forty-five (45) days prior to an election and removed within seven (7) days following an election, are not included in display surface area calculations.
  • Signs located within buildings are not included in display surface area calculations.
  • Signs not exceeding three (3) square feet of display surface area of a warning, directive, or instructional nature, including entrance, exit, and restroom signs, are not included in display surface area calculations.
  • Signs which are attached labels of a commodity offered for sale are not included in display surface area calculations.

Sign Plan & Submission Notes for Sapulpa

  • No reference to a Master Sign Plan, sign plan, or variance meeting requirements is provided in this ordinance text for general sign regulations.
  • Certain sign locations, types, or exceptions may be subject to the Board of Adjustment approval for special exceptions (e.g., antennas, temporary/pre-manufactured structures, mini-storage, etc.) but not specifically for sign plans.
  • All signs must comply with setback, separation, and display surface requirements as outlined in Sec. 921, but there is no provision requiring a sign plan or master sign plan for general compliance.

Source: municode municipal code