Questions? Call us at (262) 218-2915

Sign Regulations in Mill City, Oregon

Mill City, Oregon has specific sign regulations covering 18 sign types across 4 zoning districts. Regulated sign types include Permanent Entrance Sign, Freestanding Sign, Wall-Mounted Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Mill City, Oregon

Sample Sign Requirements in Mill City

Sign TypeMax HeightMax AreaSetback
Permanent Entrance Sign6 feet (for freestanding sign)32 sq ft overall; 16 sq ft per display surfaceNot listed
Freestanding Sign20 feet150 sq ft (one face), 200 sq ft (two faces)Not within 25 feet of any property line abutting a residential zone.
Wall-Mounted SignNot listed30% of building faceNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Mill CityFull Coverage

Sign Types Covered

18

  • Permanent Entrance Sign
  • Freestanding Sign
  • Wall-Mounted Sign
  • Wall-Painted Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Mill City

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Mill City, the height limit for Freestanding Sign in the CC, CH, I, Commercial Zone, Industrial Zone is 20 feet. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Mill City require a permit. From the submission notes on this page: All signs, except exempted signs, require a sign permit and application to the zoning official. Run a code check for an exact address to see the permit requirements for that zone.

Mill City's sign code covers 18 sign types, including Permanent Entrance Sign, Freestanding Sign, Wall-Mounted Sign, and Wall-Painted Sign. Most commercial signs need a permit. The ordinance lists 13 exemptions. One of them: Flags. The full list is on this page.

This page doesn't list a single setback distance for signs in Mill City. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Mill City's sign code lists Moving, Flashing, Electronic Message, Automatic Changing, Revolving Signs as a sign type, but this page doesn't quote the code's rules for digital or LED signs. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Mill City Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Mill City, Oregon, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Mill City, Oregon Sign Rules at a Glance

Mill City, Oregon regulates 18 sign types across 4 zoning districts. Exempted Temporary Signs (Residential/Public Zone) are capped at 16 sq ft (Sec. 17.68.040A2). Most commercial signs in Mill City require a permit.

Detailed Sign Ordinance Requirements for Mill City, Oregon

Sign Rules by Zoning District in Mill City (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
R-1, R-2, Residential Zone, P, Public Zone16 feet (for freestanding sign)32 sq ft overall; 16 sq ft per display surfaceNot listed
CC, CH, I, Commercial Zone, Industrial Zone820 feet150 sq ft (one face), 200 sq ft (two faces)Not listed
Special Planned Development (SPD) Zone1Not listedNot listedNot listed
General Regulations For All Zones83 ft (ground mounted, exempted)40 sq ft per face (banner); 50 ft per site (pennant)Not listed

Zone-by-Zone Sign Requirements in Mill City(sample of 3 of 4 zones)

R-1, R-2, Residential Zone, P, Public Zone

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Permanent Entrance Sign6 feet (for freestanding sign)32 sq ft overall; 16 sq ft per display surfaceNot listedNot listedOne sign per vehicular entry or one per street frontage where use has only one vehicular entryAt vehicular entry to the propertyNot listedUnlock17.68.050A1, 17.68.050A2, 17.68.050A4

CC, CH, I, Commercial Zone, Industrial Zone

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign20 feet150 sq ft (one face), 200 sq ft (two faces)Not listedNot within 25 feet of any property line abutting a residential zone.One per premisesOn premises zoned and used for commercial or industrial purposes; must not be on or over property line or within 25 feet of any property line within a residential zone.Not listedUnlock17.68.050B1, 17.68.050B5
Wall-Mounted SignNot listed30% of building faceNot listedNot listedNo limit (area governs)Attached to building wallNot listedUnlock17.68.050B2, 17.68.050B5
Wall-Painted SignNot listed100% of one face, 30% of all facesNot listedNot listedNo limit (area governs)On building faceNot listedUnlock17.68.050B2, 17.68.050B5
Projecting SignNot listed20% of building face (alone); total of all sign surfaces on building face: 30% of face.Not listedNot listedNo limit (area governs)Attached to building, projecting up to 4 feet into street right-of-way or over roadwayNot listedUnlock17.68.050B3, 17.68.050B5
Roof Sign4 feet above the highest point of the building1 sq ft per 2 lineal feet of street frontageNot listedNot listedNo limit (area governs)On roof, but may not project over parapet wallNot listedUnlock17.68.050B4, 17.68.050B5
Fence SignNot listed1 sq ft per 5 ft fence lengthNot listedNot listedNot listedOn fenceNot listedUnlock17.68.050B6
Off-premise SignNot listed64 sq ft (two-faced), 32 sq ft per display surfaceNot listedNot listedOne per street frontageOn residentially used and vacant properties within commercial or industrial zoneNot listedUnlock17.68.050B8
Moving, Flashing, Electronic Message, Automatic Changing, Revolving SignsNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock17.68.050B7

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Exempted Signs3 ft (ground mounted, exempted)3 sq ft (address/occupant/name signs, on-site directional)Not listedNot listedNot listedAll zonesNot listedUnlock17.68.040A1
Exempted Temporary Sign (Residential/Public Zone)Not listed16 sq ftNot listedNot listedNot listedAll zones (per Section); must be non-permanent.Not listedUnlock17.68.040A2
Exempted Temporary Sign (Commercial/Industrial Zone)Not listed32 sq ftNot listedNot listedNot listedAll zones (per Section); must be non-permanent.Not listedUnlock17.68.040A2
Public Direction and Safety SignNot listedNot listedNot listedNot listedNot listedAllowed in right-of-way; all zonesNot listedUnlock17.68.040A3
Holiday Displays/DecorationsNot listedNot listedNot listedNot listedNot listedAll zonesNot listedUnlock17.68.040A4
Event Banner or Pennant (Temporary, Exempted)Not listed40 sq ft per face (banner); 50 ft per site (pennant)Not listedNot listedNot listedOn premises; all zonesNot listedUnlock17.68.040A5
Window Sign (Commercial/Industrial Zones Only)Not listedNot listedNot listedNot listedNot listedInside windowNot listedUnlock17.68.040A10-11
Fence Sign (Athletic Event Internal, Exempt)Not listedNot listedNot listedNot listedNot listedInside fence for athletic eventsNot listedUnlock17.68.040A13

PermitPal covers all 4 zoning districts in Mill City. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Mill City

  • It is unlawful to erect, display, or maintain any sign or advertising structure within the right-of-way of any street, along any driveway, or in any other location which does not meet the ordinance’s requirements for exempted signs, or that is likely to be confused with traffic control devices, or creates a distracting or hazardous condition for motorists, bicyclists, or pedestrians.
  • Banners, pennants, and balloons are prohibited except as permitted for specific exempted uses.
  • Temporary signs are prohibited except as specified under exemptions.
  • No sign may be erected or maintained which by use of lights, illumination (including sequential or partial illumination) creates an unduly distracting or hazardous condition to motorists, bicyclists, or pedestrians.
  • No sign or portion of a sign shall be placed so that it obstructs any fire escape, stairway, or standpipe; interferes with human exit through any window above the first floor; obstructs any door or required exit from any building; or obstructs any required light or ventilation.
  • Fence signs exceeding one square foot of sign face per twenty feet of fence length in residential and public zones or one square foot per five feet of fence length in commercial and industrial zones are prohibited except for temporary real estate signs or internal fence signs as described in exemptions.
  • Signs affixed to power, utility, or traffic control poles are prohibited, except for city-approved traffic control signs and pole identification placards.
  • Searchlights are prohibited.

Exempt Signs in Mill City

  • Signs not exceeding three square feet in area, nonilluminated, not exceeding three feet in height if ground mounted, such as property addresses, building numbers, occupant names, professional nameplates, onsite directional and similar signs.
  • Temporary, non-illuminated signs not permanently installed, not exceeding sixteen square feet in residential or public zones and thirty-two square feet in commercial or industrial zones, displayed only for the duration of the activity (real estate, political, construction, garage sale, open house, special event, and similar).
  • Signs placed for public direction and safety (traffic, municipal, emergency direction signs, legal notices, railroad crossing signals, and similar) including those within the public right-of-way if not a safety hazard.
  • Temporary displays of lights or decorations associated with holidays, in place for no more than forty days.
  • Banners (max forty square feet per face) and pennants (max fifty feet length per site) used in conjunction with temporary events, in place no longer than thirty days.
  • Banners in public rights-of-way intended to advertise/promote the community/region or events, subject to city and ODOT approval if along Highway 22.
  • Flags.
  • Signs carved into buildings or integral to building materials such as cornerstones or building names.
  • Signs of public or legal notice.
  • Window signs in commercial and industrial zones.
  • Painted or printed window displays of temporary/holiday nature.
  • Promotional displays for special events, in place for up to seven days.
  • Fence signs inside fences used for athletic event advertising, associated with onsite athletic events.

Sign Plan & Submission Notes for Mill City

  • All signs, except exempted signs, require a sign permit and application to the zoning official.
  • Signs for uses requiring conditional use or site plan review permits, or for uses in the special planned development (SPD) zone, are reviewed by the planning commission at the public hearing for those uses.
  • Variances to the sign limits may be granted through a formal application and review process as outlined in Chapter 17.56.
  • Signs in the SPD zone may be subject to more restrictive standards per the review authority.
  • Signs constructed or placed prior to the ordinance are nonconforming but must meet prior code; replacement or relocation requires compliance with the current code.

Source: municode municipal code