Questions? Call us at (262) 218-2915

Sign Regulations in Redmond, Oregon

Redmond, Oregon has specific sign regulations covering 24 sign types across 8 zoning districts. Regulated sign types include Wall Sign, Awning/Canopy Sign, Directional Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Redmond, Oregon

Sample Sign Requirements in Redmond

Sign TypeMax HeightMax AreaSetback
Wall SignNot listed32 sq ftNot closer than 5 ft from street right-of-way, 25 ft from adjacent lot
Ground Mounted Sign10 ft32 sq ftNot closer than 5 ft from street right-of-way, 25 ft from adjacent lot
Directional Sign4 ft (standard); 8 ft (if on building wall)4 sq ft (standard); 16 sq ft (on arterial streets >50 mph)Not listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for RedmondFull Coverage

Sign Types Covered

24

  • Wall Sign
  • Awning/Canopy Sign
  • Directional Sign
  • Daily Display Sign
  • +2 more types

Zoning Districts

8

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Redmond

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

In Redmond, the height limit for Free-Standing Sign (Cat 2, industrial/manufacturing >8 acres) in the Light Industrial (M-1) Zone and other zoning districts is 50 ft (Sec. 11.190.3.B). The height limit for Roof Sign (Option: in lieu of wall sign) in the General Commercial Zones (C-1, C-2, C-3, C-4, C-5) is 6 ft above roof line or 25 ft above curb line (Sec. 11.160.2). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Redmond require a permit. From the submission notes on this page: References to Section 11.130 (Prohibited Signs), Section 11.110 (Temporary Signs), and Section 11.230 (Permitted Materials) are made in all zones, indicating the need for compliance with those general sign requirements in all applications. Run a code check for an exact address to see the permit requirements for that zone.

Redmond's sign code covers 24 sign types, including Wall Sign, Awning/Canopy Sign, Directional Sign, and Daily Display Sign. Most commercial signs need a permit. The ordinance lists 1 exemption. One of them: Traffic control signs or portions of signs providing only public service information such as time, date, temperature, weather, or similar information are exempt from the prohibition on flashing, intermittent, or animated illumination. The full list is on this page.

In Redmond, Free-Standing Sign (Cat 2, industrial/manufacturing >8 acres) in the Light Industrial (M-1) Zone and other zoning districts must be set back 600' from other tall free-standing sign (Sec. 11.190.3.B). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Redmond's sign ordinance that cover digital, changing, or flashing signs: Traffic control signs or portions of signs providing only public service information such as time, date, temperature, weather, or similar information are exempt from the prohibition on flashing, intermittent, or animated illumination. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Redmond Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Redmond, Oregon, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Redmond, Oregon Sign Rules at a Glance

Redmond, Oregon regulates 24 sign types across 8 zoning districts. Ground Mounted Signs in the Light Industrial (M-1) Zone and other zoning districts are capped at 10 ft tall, 75 sq ft, and 12 ft wide, set back 10 ft from any other sign. Most commercial signs in Redmond require a permit.

Detailed Sign Ordinance Requirements for Redmond, Oregon

Sign Rules by Zoning District in Redmond (8 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Open Space Park Reserve (OSPR) Zone310 ft32 sq ftNot listed
Residential Zones95 ft32 sq ftNot listed
General Commercial Zones (C-1, C-2, C-3, C-4, C-5)1330 ft75 sq ftNot listed
Mixed Use Neighborhood (MUN) Zone, Mixed Use Employment (MUE) Zone618 ft above sidewalk26 sq ft or 5% of ground floor façade, whichever is lessNot listed
Mixed Use Live/Work (MULW) Zone66 ft (sign top); base up to 8 ft30 sq ft (sign area only; base ≤8 ft)Not listed
Light Industrial (M-1) Zone, General Industrial (M-1.5) Zone, Heavy Industrial (M-2) Zone, Public Facility (PF) Zone, Fairground (FG) Zone850 ft350 sq ft (max)Not listed
Downtown Overlay District (DOD)6Max: first floor of building or 15 ft above sidewalk, whichever less. Min clearance: 8 ft sidewalk20 sq ft (sign area only; base ≤2 ft)Not listed
Start free to see 1 more zone

Zone-by-Zone Sign Requirements in Redmond(sample of 3 of 8 zones)

Residential Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Multi-Family Complexes)Not listed32 sq ftNot listedNot listed1 per public entrance, max 3 per developmentPer public vehicular entrance, up to 3 per development.Not listedUnlockSec. 11.150.1, Sec. 11.150.8
Ground Mounted Sign (Multi-Family Complexes)5 ft32 sq ftNot listedNot listed1 per public entrance, max 3 per developmentPer public vehicular entrance, up to 3 per development.Not listedUnlockSec. 11.150.1, Sec. 11.150.8
Wall Sign (Subdivision, PUD, Mobile Home Park)Not listed32 sq ftNot listedNot listed1 per public entrance, max 3Per public vehicular entrance, max 3 per development.Not listedUnlockSec. 11.150.2, Sec. 11.150.8
Ground Mounted Sign (Subdivision, PUD, Mobile Home Park)5 ft32 sq ftNot listedNot listed1 per public entrance, max 3Per public vehicular entrance, max 3 per development.Not listedUnlockSec. 11.150.2
Wall Sign (Commercial Use)Not listed32 sq ftNot listedNot listed1 wall or ground mounted sign per commercial use + directoryOne per commercial use in Res. Zone.Not listedUnlockSec. 11.150.3
Ground Mounted Sign (Commercial Use)5 ft32 sq ftNot listedNot listed1 wall or ground mounted sign per commercial use + directoryOne per commercial use in Res. Zone.Not listedUnlockSec. 11.150.3
Directional Sign4 ft (standard), 8 ft (wall mounted)4 sq ft (standard); 16 sq ft on arterial streets >50 mphNot listedNot listed1 per street frontage on arterialsOn property, per street frontage for arterials.Not listedUnlockSec. 11.150.4, Sec. 11.150.8
Daily Display Sign4 ft9 sq ft3 ftBehind curb or min 10 ft from edge of nearest street travel lane1 per business or per 25 ft of frontageOn private property or public right-of-way, behind curb or 10 ft from edge of travel lane if no curbNot listedUnlockSec. 11.150.6

General Commercial Zones (C-1, C-2, C-3, C-4, C-5)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Roof Sign (Option: in lieu of wall sign)6 ft above roof line or 25 ft above curb line50 sq ftNot listedNot listed1On roof, single story, flat roofed buildingNot listedUnlockSec. 11.160.2
Free-Standing Sign25 ftBased on street frontage: 50 sq ft (1-100'), 70 sq ft (101-150'), 90 sq ft (>150')Not listedNot listed1 per frontageOne per street frontage; not in side/rear yard. Min 8' clearance if in front yard. Max 2 on double frontage.Not listedUnlockSec. 11.160.3.B/D
Ground Mounted Sign10 ft75 sq ft12 ftNot listed1 per frontageNot within 10' of any other sign, not right-of-way or clear vision areaNot listedUnlockSec. 11.160.3.F
Directional Sign4 ft (wall: 8 ft)4 sq ft (normal), 16 sq ft for arterials >50 mphNot listedNot listed1 per frontage on arterialsOn premise, per street frontage for arterialsNot listedUnlockSec. 11.160.4
Marquee Sign18 in (vertical height)8 sq ftNot listedNot listedNot listedUnder marquee with min 8' clearance; horizontal clearance ≥3' from curb lineNot listedUnlockSec. 11.160.5.E/F/G
Drive-up Window SignNot listed16 sq ftNot listedNot listed1At drive-up window, 1 per businessNot listedUnlockSec. 11.160.7
Billboard Sign30 ft12 ft vertical x 24 ft horizontal (288 sq ft face)24 ft500 ft from other billboards (same side of road)Not listedOn public or private property (with owner/City approval); not within a right-of-way.Not listedUnlockSec. 11.160.8
Daily Display Sign4 ft9 sq ft3 ftBehind curb or min 10' from edge of nearest street travel lane1 per business or per 25 ftPrivate property or public ROW; setback: behind curb or 10' from edge of street travel lane (if no curb)Not listedUnlockSec. 11.160.10

Light Industrial (M-1) Zone, General Industrial (M-1.5) Zone, Heavy Industrial (M-2) Zone, Public Facility (PF) Zone, Fairground (FG) Zone

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed350 sq ft (max)Not listedNot listed2 per useOn building façadeNot listedUnlockSec. 11.190.1, .10
Ground Mounted Sign10 ft75 sq ft12 ft10 ft from any other sign1 per frontagePer street frontage providing vehicular access; not within 10 ft of any other sign, ROW, or clear vision area.Not listedUnlockSec. 11.190.2, .7
Free-Standing Sign (Cat 1)25 ftBased on frontage: 50 sq ft (1-100'), 70 sq ft (101-150'), 90 sq ft (>150')Not listedNot listed1Adjacent to frontage with accessNot listedUnlockSec. 11.190.3.A
Free-Standing Sign (Cat 2, industrial/manufacturing >8 acres)50 ft250 sq ft (max)Not listed600' from other tall free-standing sign1 (if criteria met)Adjacent to street frontage with accessNot listedUnlockSec. 11.190.3.B
Directional Sign4 ft (wall: 8 ft)4 sq ft (normal), 16 sq ft (arterial frontage >50 mph)Not listedNot listed1 per street frontage on arterialsOn premise, per street frontage for arterials >50 mphNot listedUnlockSec. 11.190.4
Building Directory SignNot listed3 sq ft per occupantNot listedNot listedNot listedWithin buildingNot listedUnlockSec. 11.190.5
Billboard Sign30 ft288 sq ft (12’ x 24’)24 ft500' from other billboard (same side of road)Subject to citywide limitOn public or private property with owner & city approval; not in right-of-way.Not listedUnlockSec. 11.190.6
Awning/Canopy SignNot listedNot listedNot listedNot listed1 per frontage, per occupancyOne per frontage per occupancyNot listedUnlockSec. 11.190.8

PermitPal covers all 8 zoning districts in Redmond. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Redmond

  • No sign shall be erected or maintained which, by use of lights or illumination creates an unduly distracting or hazardous condition to a motorist, pedestrian or to the general public.
  • No exposed reflective type bulb, or incandescent lamp, which exceeds 25 watts, shall be exposed to direct view from a public street or highway, but may be used for indirect light illumination of the display surface of a sign.
  • When neon tubing is employed on the exterior or interior of a sign, the capacity of such tubing shall not exceed 300 milliamperes rating for any colored tubing.
  • When fluorescent tubes are used for the internal illumination of a sign, illumination shall not exceed illumination equivalent to 800 milliamperes rating tubing behind a plexiglass face spaced at least nine inches, center to center.
  • No colored lights shall be used at any location or in any manner so as to be confused with or construed as traffic control devices.
  • No sign may be erected or maintained if it contains, includes, or is illuminated by any flashing, intermittent, revolving, rotating or moving light or lights or moves or has any animated or moving parts. Exception is made for traffic control signs or public service information such as time, date, temperature, weather, or similar information.
  • Signs shall not be placed in the clear vision triangle.
  • Signs shall not encroach into required off-street parking areas, public roadways, or alleys.
  • Posts or columns beyond the property line will not be permitted.
  • Signs may not be illuminated so as to interfere with the effectiveness of any official traffic device, impair driver vision, or cause glare to adjacent residential structures.

Exempt Signs in Redmond

  • Traffic control signs or portions of signs providing only public service information such as time, date, temperature, weather, or similar information are exempt from the prohibition on flashing, intermittent, or animated illumination.

Sign Plan & Submission Notes for Redmond

  • References to Section 11.130 (Prohibited Signs), Section 11.110 (Temporary Signs), and Section 11.230 (Permitted Materials) are made in all zones, indicating the need for compliance with those general sign requirements in all applications.
  • Billboards require a Conditional Use Permit from the Community Development Department prior to installing or relocating any billboard.
  • A City right-of-way permit or City revocable permit is required prior to approval of a sign permit for Daily Display Signs to be located on public property or in the right-of-way; the permit is revocable.
  • A sign permit application for a Daily Display Sign on public property or public right-of-way must be accompanied by a certificate of insurance showing Commercial General Liability coverage.
  • The sign owner must provide a document exempting the City from liability for incidents involving Daily Display Signs placed on public property or public right-of-way.
  • Downtown Overlay District standards control where there is a conflict with general provisions; compliance verification may be required.
  • Evidence of a state permit from the Oregon Department of Transportation (ODOT) is required for billboards.

Source: municode municipal code