Sign Regulations in Beaver Borough, Pennsylvania

Beaver Borough, Pennsylvania has specific sign regulations covering 16 sign types across 8 zoning districts. Regulated sign types include Decorative Flag, Flag, Temporary Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Sign Regulation Overview for Beaver Borough, Pennsylvania

Sample Sign Requirements in Beaver Borough

Sign TypeMax HeightMax AreaSetback
Window Sign50 square feet or 40% of window area, whichever is less.
Projecting Sign (Upper Floor Occupants)18 square feet total, not more than 9 square feet per sign face
Decorative Flag6 square feet

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Beaver BoroughFull Coverage

Sign Types Covered

16

  • Decorative Flag
  • Flag
  • Temporary Sign
  • Building Sign
  • +2 more types

Zoning Districts

8

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Beaver Borough

Municipal Code3 permit application links available

Frequently Asked Questions

Sign height limits in Beaver Borough vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Beaver Borough, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Beaver Borough, regulated sign types include Decorative Flag, Flag, Temporary Sign, Building Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Beaver Borough vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Beaver Borough are regulated with specific requirements for brightness, animation, and message duration. Beaver Borough has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Beaver Borough Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Beaver Borough, Pennsylvania sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Beaver Borough, Pennsylvania Sign Rules at a Glance

Beaver Borough, Pennsylvania regulates 16 sign types across 8 zoning districts. Building Sign (First Floor Business)s in the RC-1 Retail Core District zoning district are capped at 2.5 feet tall, 50 square feet, and Business storefront width wide (Sec. §27-1602.H.6(b)). Most commercial signs in Beaver Borough require a permit.

Detailed Sign Ordinance Requirements for Beaver Borough, Pennsylvania

Sign Rules by Zoning District in Beaver Borough (8 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones250 square feet or 40% of window area, whichever is less.
P Public District1
Residential District (R-1, R-2)56 square feet
Gateway Commercial West District (GCW)512 square feet
Service Commercial District (SC)612 square feet
Gateway Commercial East District (GCE)612 square feet
RC-1 Retail Core District82.5 feet50 square feet
RC-2 Retail Core District812 square feet

Zone-by-Zone Sign Requirements in Beaver Borough(sample of 3 of 8 zones)

Gateway Commercial East District (GCE)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Architectural Statue1Must be placed within 30 inches of the business; may not obstruct ordinary pedestrian traffic.Unlock§27-1602.H.5(a)
Building Sign8 square feet1Only if no projecting or free-standing ground/monument sign.Unlock§27-1602.H.5(b)
Decorative Flag6 square feet1Per propertyUnlock§27-1602.H.5(c)
Flag1Per propertyUnlock§27-1602.H.5(d)
Free-Standing Ground or Monument Sign12 square feet1Only if there is no building or projecting sign.Unlock§27-1602.H.5(e)
Temporary Sign9 square feet1Unlock§27-1602.H.5(f)

RC-1 Retail Core District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Architectural Statue1Must be within 30 inches of the business; may not obstruct ordinary pedestrian traffic.Unlock§27-1602.H.6(a)
Building Sign (First Floor Business)2.5 feet50 square feetBusiness storefront width1Mounted above display window (and transom where present) and below second-story window sills or signboard cornice.Unlock§27-1602.H.6(b)
Building Sign (Upper Floor Business)1Unlock§27-1602.H.6(b)
Bulletin Board6 square feet per face1No greater than 30 inches from face of storefront. Cannot obstruct ordinary pedestrian traffic.Unlock§27-1602.H.6(c)
Decorative Flag6 square feet1Per storefrontUnlock§27-1602.H.6(d)
Flag1Per storefrontUnlock§27-1602.H.6(e)
Projecting Sign6 square feet1One per business; in addition to building sign.Unlock§27-1602.H.6(f)
Temporary Sign9 square feet1Unlock§27-1602.H.6(g)

RC-2 Retail Core District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Architectural Statue1Within 30 inches of the business; may not obstruct ordinary pedestrian traffic.Unlock§27-1602.H.7(a)
Building Sign6 square feet1Only if no projecting or free-standing ground/monument sign.Unlock§27-1602.H.7(b)
Bulletin Board6 square feet per face1No greater than 30 inches from face of storefront; cannot obstruct pedestrian traffic.Unlock§27-1602.H.7(c)
Decorative Flag6 square feet1Per buildingUnlock§27-1602.H.7(d)
Flag1Per buildingUnlock§27-1602.H.7(e)
Projecting Sign6 square feet1One per business; only if there is no building or projecting signage.Unlock§27-1602.H.7(f)
Temporary Sign9 square feet1Unlock§27-1602.H.7(g)
Free-Standing Ground or Monument Sign12 square feet1Only if no building or projecting signage.Unlock§27-1602.H.7(h)

PermitPal covers all 8 zoning districts in Beaver Borough — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 8 zones for Beaver Borough — start free

Prohibited Signs in Beaver Borough

  • No sign shall be located, designed or constructed in a manner to obstruct or interfere with any traffic control signal, sign or device, or intersection sight triangle.
  • No sign shall be permitted that is deemed to constitute a hazard of any kind, obscures light or air from a building, or prevents ingress or egress from any window or exit.
  • Signs may not be attached to utility poles or street trees, except for municipal purposes.
  • A sign shall be removed within 30 days whenever the circumstances that led to its erection no longer apply or if safety violations occur.
  • Signs or devices with flashing, moving or similar lighting or animation are prohibited in all zoning districts, including interior signage placed inside a window or other such transparent surface.
  • Illumination for signs must concentrate light upon the sign and not cast glare upon the street, sidewalk, or adjacent property.
  • No electrical bulbs shall be exposed unless satisfactorily shielded from view by a globe or other visible barrier.
  • No sign may be mounted on the roof of a building.
  • No business or industrial sign shall be placed to face an abutting residential district except when authorized as a use by special exception.
  • Roof signs are prohibited.
  • Signs which flash, rotate, have motorized moving parts, or contain reflective elements are prohibited.
  • Moving, animated, flashing, revolving, inflatable or wind operated signs are prohibited.
  • Any sign advertising or identifying a business or organization which is defunct or not located on the premises is prohibited.
  • Signs which by reason of position, shape or color may interfere with, obstruct the view of, or be confused with any authorized traffic sign, signal or device are prohibited.
  • Signs which constitute a hazard to pedestrian or vehicular traffic because of intensity or direction of illumination are prohibited.
  • Backlit awnings or signs, and individually backlit lettering, are prohibited.
  • Changeable letter signs, either electronic or manual, are prohibited, except for churches in GCW, GCE, SC, P, R-1 and R-2 zoning districts.
  • No person shall willfully or maliciously destroy, remove, deface, obliterate or cover up any lamp, flare, warning sign or barricade erected by the Borough or by any person doing work by permission of the Borough on any street, alley, sidewalk or bridge.
  • No sign shall be permitted in a public right-of-way (for exempt temporary signs and political campaign signs).

Exempt Signs in Beaver Borough

  • Signs of a duly constituted local, state or federal governmental body, including traffic or similar safety and regulatory devices, legal notices, railway warning signals, memorial signs or tablets, are exempt from sign regulations and do not require a permit.
  • Small signs with a surface area not exceeding two square feet, displayed for the direction or convenience of the public which identify landmarks, parking areas, convenience facilities, meeting times and place of public, nonprofit, service or charitable organizations, subject to approval of the Zoning Officer, are exempt from permit requirements.
  • One temporary nonlighted sign on a construction site, not exceeding 32 square feet per side, denoting developer, engineer, architect, contractor, marketing agency, funding agencies, or related project information, is exempt from permit requirements, subject to specified conditions (commercial construction or renovation over 5,000 sq ft, multifamily construction for 10+ units, no more than two-sided, removed within 6 months or at first occupancy).
  • One temporary nonlighted real estate property sign, plus up to two riders, relating to sale or lease of the property, not exceeding seven square feet per side, is exempt from permit requirements, subject to specified conditions (height, two-sided, removed within three days after sale or lease, not for storage properties, and open house sign no more than 6 sq ft for no more than 24 hours).
  • Temporary signs advertising yard sales, street fairs or other temporary activities, or a temporary sign directing persons to such activity, not exceeding 9 sq ft, erected no earlier than 14 days prior to the event and removed within 24 hours after, where permission is granted by the property owner; permit required unless otherwise exempted.
  • Political campaign signs not exceeding six square feet, erected no sooner than 30 days before election, removed within seven days after, and only on sites with owner's permission, are exempt from permit requirements.
  • Decorative flags do not require a sign permit.
  • Historic signage restored or preserved that does not comply otherwise is exempt if designated as historic by Borough Council, subject to their requirements.

Sign Plan & Submission Notes for Beaver Borough

  • All signs must comply with the provisions of Part 16 and any other applicable ordinances and regulations of Beaver Borough.
  • An application for a sign permit must include two scaled blueprints or ink drawings, or computer-generated drawing of the design, including plan, specifications, materials, lighting, method of construction and attachment.
  • Sign permits will not be issued for noncompliance with this Part or fee payment.
  • A traffic control signage plan and supporting documentation shall be submitted for approval (for street signage), to be installed prior to occupancy of any dwellings.
  • Street name signs and all traffic control/no parking/speed limit signs must meet specified standards and be approved by Council.
  • Parking and signage design and construction shall comply with standards in Part 16 regardless of zoning district.
  • There is no explicit mention in the provided ordinance text of a 'Master sign plan' or a requirement for a comprehensive sign plan or variance meeting for signage within the sections reviewed; permitting appears to be handled through the regular sign permit application process, and special exceptions may be required for business or industrial signs facing residential districts.

Source: ecode360 municipal code