Questions? Call us at (262) 218-2915

Sign Regulations in Brentwood Borough, Pennsylvania

Brentwood Borough, Pennsylvania has specific sign regulations covering 30 sign types across 5 zoning districts. Regulated sign types include Nameplate, Directional Sign, Wall Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Brentwood Borough, Pennsylvania

Sample Sign Requirements in Brentwood Borough

Sign TypeMax HeightMax AreaSetback
NameplateNot listed2 sq ftNot listed
Bulletin Sign (Instructional or Directional for Institutional Use)Not listed12 sq ft15 ft from sidewalk or street ROW
Temporary Real Estate SignNot listed6 sq ftNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Brentwood BoroughFull Coverage

Sign Types Covered

30

  • Nameplate
  • Directional Sign
  • Wall Sign
  • Wall Plaque
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Brentwood Borough

Municipal Code1 permit application link available

Frequently Asked Questions

In Brentwood Borough, the height limit for Ground Sign in the MUN, CRD, I zoning districts is 24 ft (Sec. 210-62F). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Brentwood Borough require a permit. From the submission notes on this page: All applications for permits for construction, installation, maintenance, repair, and/or modification of signs must be submitted to the Borough Zoning Officer for review and approval or denial prior to commencement of any activity. Run a code check for an exact address to see the permit requirements for that zone.

Brentwood Borough's sign code covers 30 sign types, including Nameplate, Directional Sign, Wall Sign, and Wall Plaque. Most commercial signs need a permit. The ordinance lists 15 exemptions. One of them: Address numbering. The full list is on this page.

In Brentwood Borough, Pole Sign (Institutional Use only) in the Residential Districts (R-1, R-2, R-3) must be set back 15 ft from street line, unless attached to building (Sec. 210-60F). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Brentwood Borough's sign ordinance that cover digital, changing, or flashing signs: No digital sign permit shall be issued unless the applicant submits a written certification from the sign manufacturer regarding light intensity limits and password-protection from end-user manipulation. Conditional use approval (a type of special approval, often involving a public hearing or variance process) is required for the installation of any digital sign (other than a static alphanumeric display) in the CRD or I Districts. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Brentwood Borough Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Brentwood Borough, Pennsylvania, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Brentwood Borough, Pennsylvania Sign Rules at a Glance

Brentwood Borough, Pennsylvania regulates 30 sign types across 5 zoning districts. Ground Signs in the MUN, CRD, I zoning districts are capped at 24 ft tall and 125 sq ft per sign (Sec. 210-62F). Most commercial signs in Brentwood Borough require a permit.

Detailed Sign Ordinance Requirements for Brentwood Borough, Pennsylvania

Sign Rules by Zoning District in Brentwood Borough (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones12Not listedNot listedNot listed
Residential Districts (R-1, R-2, R-3)6Not listed24 sq ftNot listed
MUN, CRD, I1324 ft max125 sq ft per signNot listed
I120 ft (max); bottom edge max 8 ft above adjacent roadway300 sq ft (12' x 25')Not listed
MU Mixed Use Zoning District8Not listed50 sq ft (or as calculated)Not listed

Zone-by-Zone Sign Requirements in Brentwood Borough(sample of 3 of 5 zones)

Residential Districts (R-1, R-2, R-3)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
NameplateNot listed2 sq ftNot listedNot listedNot listedPlaced directly against a building wall.Not listedUnlock§ 210-60A, § 210-60E
Bulletin Sign (Instructional or Directional for Institutional Use)Not listed12 sq ftNot listed15 ft from sidewalk or street ROW1 per institutionFreestanding; on premises of educational, philanthropic or religious institution.Not listedUnlock§ 210-60B, § 210-60E
Temporary Real Estate SignNot listed6 sq ftNot listedNot listedMax 2 per property; max 1 per streetOn property advertised for sale, lease, or rent.Not listedUnlock§ 210-60C
Pole Sign (Institutional Use only)Not listedNot listedNot listed15 ft from street line, unless attached to buildingNot listedNot listedNot listedUnlock§ 210-60F
Wall or Ground Sign (R-3 Multiple Family or authorized use)Not listed24 sq ftNot listed15 ft from street ROW (ground sign)1 per buildingOn multiple-family dwelling or authorized use in R-3.Not listedUnlock§ 210-60H
Directional SignNot listedNot listed5 sq ft (per § 210-57O - definition)Not listedNot listedNot listedNot listedUnlock§ 210-60I; § 210-57O

MUN, CRD, I

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
NameplateNot listed2 sq ftNot listedNot listedNot listedOn building wall.Not listedUnlock§ 210-61A (Permitted in any residential district and subject to conditions there)
Wall SignNot listed50 sq ft (or as calculated)Not listedNot listedNot listedFront or side wall of building; face projects max 12 in. from wall; if flush, no minimum height.Not listedUnlock§ 210-61B
Freestanding Sign (No Building On Property)Not listed40 sq ftNot listed15 ft from street ROW1 per property (no building)At least 15 ft from street right-of-way.Not listedUnlock§ 210-61C
Wall PlaqueNot listed3 sq ftNot listedNot listedNot listedExtends max 1.5 in from wall.Not listedUnlock§ 210-61D
Temporary SignNot listed32 sq ftNot listedMin. 15 ft from property or ROW linesNot listedMin. 15 ft from property or ROW lines, on same lot as use.Not listedUnlock§ 210-61F
Window Sign (nonresidential, secondary use)Not listedShall not cover more than 25% of glazing per window. Internally illuminated sign limited to 2 sq ft.Not listedNot listed1 internally illuminated sign per principal useInside window of nonresidential uses only.Not listedUnlock§ 210-61G
Ground Sign24 ft max125 sq ft per signNot listed15 ft from street ROW, 5 ft from building, 10 ft from side property. +1 ft/10 sq ft over 10 sq ft.2 per frontage maxMin 15 ft from street ROW, min 5 ft from any building, min 10 ft from side property line.Not listedUnlock§ 210-62F
Pole/Pylon Sign24 ft maxSee ground sign area limits.Not listed15 ft from street ROW, 5 ft from building, 10 ft from side property. +1 ft/10 sq ft over 10 sq ft.Not listedSame as ground sign.Not listedUnlock§ 210-62F

MU Mixed Use Zoning District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
NameplateNot listed2 sq ftNot listedNot listedNot listedOn building wall.Not listedUnlock§ 210-61A, per residential standards.
Wall SignNot listed50 sq ft (or as calculated)Not listedNot listedNot listedFront or side wall of building; face projects max 12 in. from wall; if flush, no minimum height.Not listedUnlock§ 210-61B
Wall PlaqueNot listed3 sq ftNot listedNot listedNot listedExtends max 1.5 in from wall.Not listedUnlock§ 210-61D
Temporary SignNot listed32 sq ftNot listedMin. 15 ft from property or ROW linesNot listedMin. 15 ft from property or ROW lines, on same lot as use.Not listedUnlock§ 210-61F
Window Sign (nonresidential, secondary use)Not listedShall not cover more than 25% of glazing per window. Internally illuminated sign limited to 2 sq ft.Not listedNot listed1 internally illuminated sign per principal useInside window of nonresidential uses only.Not listedUnlock§ 210-61G
Awning/Canopy SignNot listedNot listedNot listedNot listedNot listedOn front or side portion of awning/canopy.Not listedUnlock§ 210-61H
Marquee SignNot listedNot listedNot listedNot listedNot listedFront or sides of marquee.Not listedUnlock§ 210-61I
Directional SignNot listed5 sq ftNot listedNot listedNot listedSite drive entrances and/or internal traffic drive aisles.Not listedUnlock§ 210-61J, § 210-57O

PermitPal covers all 5 zoning districts in Brentwood Borough. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Brentwood Borough

  • Signs not expressly permitted by the ordinance are prohibited.
  • No sign may be erected, placed, established, painted, created, altered or maintained except in conformance with the standards, procedures, regulations and requirements contained in the ordinance.
  • Prohibited signs in any zoning district include: pennants, flags, or streamers; signs advertising property for sale or rent that lists a use inconsistent with the Zoning Ordinance; signs that resemble any traffic control device; signs that contain obscene or pornographic material, including nonrepair of illegal acts of vandalism; off-premises signs, other than outdoor advertising; roof signs; signs on trees, utility poles, and traffic devices; and signs that are hazardous to public safety.
  • No sign or advertising structure shall be erected in such a manner as to obstruct free and clear vision or at any location where, by reason of the position, shape or color, it may interfere with, obstruct the view of, or be confused with any authorized traffic sign, signal, or device, or which makes use of words, phrases, symbols or characters that may interfere with, mislead or confuse traffic.
  • Signs may not be illuminated by gooseneck reflectors which are attached to the sign.
  • Illuminated signs must be nonflashing and nonglaring and must prevent glare and reflection to public streets or adjacent properties.
  • All signs must be nonanimated with no exterior moving parts.
  • Signs on public property or within a public right-of-way, except in conformance with the ordinance, are subject to confiscation.
  • Signs that are hazardous to public safety are prohibited.
  • Signs may not be secured with wire, strips of wood, or nails (for wall signs).
  • Signs damaged by inclement weather and proven unsafe may not be restored in kind without required engineering data.
  • No exterior sign established before the effective date of the ordinance may be altered or moved unless it is made to conform with current provisions, except as otherwise allowed.

Exempt Signs in Brentwood Borough

  • Holiday decorations displayed for recognized state and federal holidays.
  • Official notices authorized by a court, public body, or public safety official.
  • Memorial/historical plaques.
  • Memorial signs and tablets when cut into any masonry surface or constructed of bronze or other sculptured materials.
  • Flags of a government organization or corporate entity.
  • Signs authorized by the Borough such as street signs, safety control signs, and traffic control signs.
  • Public notice/public warning signs.
  • Auction or garage sale signs.
  • Address numbering.
  • Construction signs (temporary, only during active construction).
  • Signs of any type placed on public or parks property by authorization of Brentwood Borough.
  • Real estate signs which advertise the sale, rental, or lease of the premises upon which the sign is located.
  • Bulletin boards for public, charitable, or religious institutions on their own property.
  • A-frame (sandwich board) signs on sidewalks, one per premises, not obstructing pedestrian travel, and removed each evening upon closing.
  • Signs announcing candidacy for public office, provided they are not installed on utility poles, are not installed more than 60 days before the relevant election, and are removed within five calendar days following the election day.

Sign Plan & Submission Notes for Brentwood Borough

  • All applications for permits for construction, installation, maintenance, repair, and/or modification of signs must be submitted to the Borough Zoning Officer for review and approval or denial prior to commencement of any activity.
  • A site plan or sketch, drawn to scale, showing the lot and building, the relationship to the proposed sign, and other required information must be submitted with a sign permit application.
  • A permit must be obtained from the Borough Zoning Officer prior to construction, alteration, modification, or moving of any exterior sign (except for exempt signs of certain classes, such as real estate for sale/lease signs, name plates, or temporary signs of 1.5 square feet or less).
  • No digital sign permit shall be issued unless the applicant submits a written certification from the sign manufacturer regarding light intensity limits and password-protection from end-user manipulation.
  • For outdoor advertising signs, the submission of a land development application (including information, maps, plans, narrative, and graphic materials as set forth in the Brentwood Borough Subdivision and Land Development Ordinance) is required as part of the application process.
  • The Zoning Officer may require calculations and certifications from an architect or engineer for sign stability in certain cases (e.g., when a sign is over 25 square feet in area, a ground sign is greater than 10 feet tall, or a sign weighs more than 100 pounds).
  • Conditional use approval (a type of special approval, often involving a public hearing or variance process) is required for the installation of any digital sign (other than a static alphanumeric display) in the CRD or I Districts.

Source: ecode360 municipal code