Sign Regulations in Hazle Township, Pennsylvania
Hazle Township, Pennsylvania has specific sign regulations covering 11 sign types across 10 zoning districts. Regulated sign types include Identification Sign, Real Estate Sign, Subdivision Development Advertising Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: November 14, 2025
Sign Regulation Overview for Hazle Township, Pennsylvania
Sample Sign Requirements in Hazle Township
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Identification Sign | 10 feet if freestanding; not higher than the first story if attached to a building | 2 square feet | Not less than 5 feet from the front lot line. If freestanding, front yard: 20% of principal structure setback; side/rear: 50% (Section 1006) |
| Real Estate Sign | — | 6 square feet | Not less than 10 feet from the front lot line |
| Subdivision Development Advertising Sign | — | 6 square feet | Not less than 10 feet from front lot line. If freestanding, general setbacks apply |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
PermitPal Coverage for Hazle TownshipFull Coverage
Sign Types Covered
11
- Identification Sign
- Real Estate Sign
- Subdivision Development Advertising Sign
- Subdivision Development Identification Sign
- +2 more types
Zoning Districts
10
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
Official Resources for Hazle Township
Other Cities in Pennsylvania
Frequently Asked Questions
Sign height limits in Hazle Township vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.
To get a sign permit in Hazle Township, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Hazle Township, regulated sign types include Identification Sign, Real Estate Sign, Subdivision Development Advertising Sign, Subdivision Development Identification Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
Sign setback requirements in Hazle Township vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.
Digital and LED sign regulations in Hazle Township, Pennsylvania typically include restrictions on brightness, animation, message duration, and hours of operation. Many jurisdictions require automatic dimming. Use PermitPal for exact requirements.
AI-Powered Research
Ready to Research Hazle Township Sign Permits?
Stop spending hours searching through municipal codes. Get instant access to Hazle Township, Pennsylvania sign regulations with PermitPal's AI-powered platform.
No credit card required · Get results in seconds
Hazle Township, Pennsylvania Sign Rules at a Glance
Hazle Township, Pennsylvania regulates 11 sign types across 10 zoning districts. Identification Signs in the General Commercial District (B-2) zoning district are capped at 10 feet if freestanding; not higher than the first story if attached to a building tall and 2 square feet, with a 50% (Section 1006) setback (Sec. Section 1004.A). Most commercial signs in Hazle Township require a permit.
Detailed Sign Ordinance Requirements for Hazle Township, Pennsylvania
Sign Rules by Zoning District in Hazle Township (10 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 8 | 10 feet if freestanding; not higher than the first story if attached to a building | 50 square feet | — |
| Conservation District (C-1) | 10 | 10 feet if freestanding; not higher than the first story if attached to a building | 50 square feet | — |
| Neighborhood Commercial and Shopping Center District (B-1) | 10 | 10 feet if freestanding; not higher than the first story if attached to a building | 50 square feet | — |
| General Commercial District (B-2) | 11 | 10 feet if freestanding; not higher than the first story if attached to a building | 300 square feet per panel | — |
| Business Park (BP) | 10 | 10 feet if freestanding; not higher than the first story if attached to a building | 100 square feet (total for all business signs) | — |
| Industrial District (I-1) | 11 | 10 feet if freestanding; not higher than the first story if attached to a building | 300 square feet per panel | — |
| Heavy Industrial District (I-2) | 11 | 10 feet if freestanding; not higher than the first story if attached to a building | 300 square feet per panel | — |
| Mining District (M-1) | 11 | 10 feet if freestanding; not higher than the first story if attached to a building | 300 square feet per panel | — |
| Planned Residential Development District (PRD) | 8 | 10 feet if freestanding; not higher than the first story if attached to a building | 50 square feet | — |
| Residential Zoning Districts (R-1, R-2) | 8 | 10 feet if freestanding; not higher than the first story if attached to a building | 50 square feet | — |
Zone-by-Zone Sign Requirements in Hazle Township(sample of 3 of 10 zones)
General Commercial District (B-2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Identification Sign | 10 feet if freestanding; not higher than the first story if attached to a building | 2 square feet | — | Not less than 5 feet from the front lot line. If freestanding, front yard: 20% of principal structure setback; side/rear: 50% (Section 1006) | Up to 3 per property (4 for corner lots) (Section 1005) | On the zoning lot where the sign is located | — | Unlock | Section 1004.A |
| Business Sign | — | 200 square feet (total for all business signs) | — | If freestanding, front yard: 20% of principal structure setback; side/rear: 50% (Section 1006) | Up to 3 per property (4 for corner lots) (Section 1005) | On the zoning lot where the business is located | — | Unlock | Section 1004.B |
| Real Estate Sign | — | 6 square feet | — | Not less than 10 feet from the front lot line | 1 (for the property) | On the same lot on which the property is offered for sale or rental | — | Unlock | Section 1004.C |
| Subdivision Development Advertising Sign | — | 6 square feet | — | Not less than 10 feet from front lot line. If freestanding, general setbacks apply | Not more than 1 per subdivision | On the property where lots/homes are offered for sale | — | Unlock | Section 1004.D |
| Subdivision Development Identification Sign | — | 8 square feet | — | Not less than 10 feet from front lot line. If freestanding, general setbacks apply | Not more than 1 per entrance point | At an entrance to the subdivision/development site | — | Unlock | Section 1004.E |
| Institutional Sign | Not to exceed the maximum height restriction for principal structures in the district | 50 square feet | — | Not less than 10 feet from the front lot line. If freestanding, general setbacks apply | Up to 3 per property (4 for corner lots) (Section 1005) | For public and semipublic facilities such as schools, churches, hospitals, etc. | — | Unlock | Section 1004.G |
| On-Site Directional and/or Informational Sign | 6 feet | 6 square feet | — | Not less than 5 feet from front, rear, or side yard. If freestanding, general setbacks apply | No limit (excluded from Section 1005) | On the property, for entrances, exits, parking, etc. | — | Unlock | Section 1004.H |
| Billboard Sign | Not to project above the maximum height limitation for the zoning district | 300 square feet per panel | — | General freestanding setbacks (Section 1006); not in public right-of-way | Limited by spacing: 300 feet minimum between signs | Not within 100 feet of any residential structure or district | — | Unlock | Section 1003.H and 1004 (Billboard regulations) |
Industrial District (I-1)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Identification Sign | 10 feet if freestanding; not higher than the first story if attached to a building | 2 square feet | — | Not less than 5 feet from the front lot line. If freestanding, front yard: 20% of principal structure setback; side/rear: 50% (Section 1006) | Up to 3 per property (4 for corner lots) (Section 1005) | On the zoning lot where the sign is located | — | Unlock | Section 1004.A |
| Business Sign | — | 200 square feet (total for all business signs) | — | If freestanding, front yard: 20% of principal structure setback; side/rear: 50% (Section 1006) | Up to 3 per property (4 for corner lots) (Section 1005) | On the zoning lot where the business is located | — | Unlock | Section 1004.B |
| Real Estate Sign | — | 6 square feet | — | Not less than 10 feet from the front lot line | 1 (for the property) | On the same lot on which the property is offered for sale or rental | — | Unlock | Section 1004.C |
| Subdivision Development Advertising Sign | — | 6 square feet | — | Not less than 10 feet from front lot line. If freestanding, general setbacks apply | Not more than 1 per subdivision | On the property where lots/homes are offered for sale | — | Unlock | Section 1004.D |
| Subdivision Development Identification Sign | — | 8 square feet | — | Not less than 10 feet from front lot line. If freestanding, general setbacks apply | Not more than 1 per entrance point | At an entrance to the subdivision/development site | — | Unlock | Section 1004.E |
| Institutional Sign | Not to exceed the maximum height restriction for principal structures in the district | 50 square feet | — | Not less than 10 feet from the front lot line. If freestanding, general setbacks apply | Up to 3 per property (4 for corner lots) (Section 1005) | For public and semipublic facilities such as schools, churches, hospitals, etc. | — | Unlock | Section 1004.G |
| On-Site Directional and/or Informational Sign | 6 feet | 6 square feet | — | Not less than 5 feet from front, rear, or side yard. If freestanding, general setbacks apply | No limit (excluded from Section 1005) | On the property, for entrances, exits, parking, etc. | — | Unlock | Section 1004.H |
| Billboard Sign | Not to project above the maximum height limitation for the zoning district | 300 square feet per panel | — | General freestanding setbacks (Section 1006); not in public right-of-way | Limited by spacing: 300 feet minimum between signs | Not within 100 feet of any residential structure or district | — | Unlock | Section 1003.H and 1004 (Billboard regulations) |
Heavy Industrial District (I-2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Identification Sign | 10 feet if freestanding; not higher than the first story if attached to a building | 2 square feet | — | Not less than 5 feet from the front lot line. If freestanding, front yard: 20% of principal structure setback; side/rear: 50% (Section 1006) | Up to 3 per property (4 for corner lots) (Section 1005) | On the zoning lot where the sign is located | — | Unlock | Section 1004.A |
| Business Sign | — | 100 square feet (total for all business signs) | — | If freestanding, front yard: 20% of principal structure setback; side/rear: 50% (Section 1006) | Up to 3 per property (4 for corner lots) (Section 1005) | On the zoning lot where the business is located | — | Unlock | Section 1004.B |
| Real Estate Sign | — | 6 square feet | — | Not less than 10 feet from the front lot line | 1 (for the property) | On the same lot on which the property is offered for sale or rental | — | Unlock | Section 1004.C |
| Subdivision Development Advertising Sign | — | 6 square feet | — | Not less than 10 feet from front lot line. If freestanding, general setbacks apply | Not more than 1 per subdivision | On the property where lots/homes are offered for sale | — | Unlock | Section 1004.D |
| Subdivision Development Identification Sign | — | 8 square feet | — | Not less than 10 feet from front lot line. If freestanding, general setbacks apply | Not more than 1 per entrance point | At an entrance to the subdivision/development site | — | Unlock | Section 1004.E |
| Institutional Sign | Not to exceed the maximum height restriction for principal structures in the district | 50 square feet | — | Not less than 10 feet from the front lot line. If freestanding, general setbacks apply | Up to 3 per property (4 for corner lots) (Section 1005) | For public and semipublic facilities such as schools, churches, hospitals, etc. | — | Unlock | Section 1004.G |
| On-Site Directional and/or Informational Sign | 6 feet | 6 square feet | — | Not less than 5 feet from front, rear, or side yard. If freestanding, general setbacks apply | No limit (excluded from Section 1005) | On the property, for entrances, exits, parking, etc. | — | Unlock | Section 1004.H |
| Billboard Sign | Not to project above the maximum height limitation for the zoning district | 300 square feet per panel | — | General freestanding setbacks (Section 1006); not in public right-of-way | Limited by spacing: 300 feet minimum between signs | Not within 100 feet of any residential structure or district | — | Unlock | Section 1003.H and 1004 (Billboard regulations) |
PermitPal covers all 10 zoning districts in Hazle Township — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.
See all 10 zones for Hazle Township — start freeProhibited Signs in Hazle Township
- Signs which are located in such a position which endangers vehicular and/or pedestrian traffic by obscuring the site distance.
- Signs which by design and/or location may be confused with traffic signs or signals.
- Any sign located in or extending into a public right-of-way, including sidewalk areas, except an official street sign or traffic control sign.
- Any freestanding or projecting sign within an area bounded by the intersection of two (2) public or private streets, for a distance of twenty (20') feet along the centerline of the right-of-way of such streets from the point of their intersection.
- Freestanding or projecting signs over any type of public right-of-way, including sidewalk areas.
- Sequential, flashing or oscillating signs.
- Signs which due to their construction and/or location would constitute a hazard or a potential danger to the community.
Exempt Signs in Hazle Township
- Real estate signs and construction signs shall be exempt from securing a zoning permit.
- Excluding on-site directional and/or informational signs, temporary off premise advertising signs and event signs, not more than three (3) signs shall be permitted on any property located in any zoning district.
- An existing sign related to a legally established nonconforming use shall be considered a nonconforming sign, which may be continued at its present dimensions and location.
Source: other municipal code