Sign Regulations in Nolensville, Tennessee

Nolensville, Tennessee has specific sign regulations covering 16 sign types across 4 zoning districts. Regulated sign types include Address Sign, Plaque Sign, Awning Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Sign Regulation Overview for Nolensville, Tennessee

Sample Sign Requirements in Nolensville

Sign TypeMax HeightMax AreaSetback
Address Sign2 sf
Plaque Sign2 ft (mounting height max. 7 ft.)1 sf
Awning SignMin. 8 ft. depth/projection, or back of curb, whichever is less.

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for NolensvilleFull Coverage

Sign Types Covered

16

  • Address Sign
  • Plaque Sign
  • Awning Sign
  • Band Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Nolensville

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

Sign height limits in Nolensville vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Nolensville, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Nolensville, regulated sign types include Address Sign, Plaque Sign, Awning Sign, Band Sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Nolensville vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Nolensville are regulated with specific requirements for brightness, animation, and message duration. Nolensville has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Nolensville Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Nolensville, Tennessee sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Nolensville, Tennessee Sign Rules at a Glance

Nolensville, Tennessee regulates 16 sign types across 4 zoning districts. Blade Signs in the CD-4, CD-4C, CD-4HV, CD-OI, CV zoning district are capped at 4 ft. tall, 8 sf, and 2 ft. wide, with a Max. projection 4 ft. setback (Sec. Table 7.1.2.B-2 (Blade Sign)). Most commercial signs in Nolensville require a permit.

Detailed Sign Ordinance Requirements for Nolensville, Tennessee

Sign Rules by Zoning District in Nolensville (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
CD-2L, CD-2, CD-3L12 sf
CD-322 ft (mounting height max. 7 ft.)2 sf
CD-4, CD-4C, CD-4HV, CD-OI, CV1348 in.33% of glass
General Regulations For All Zones35 ft. from ground24 sf per side

Zone-by-Zone Sign Requirements in Nolensville(sample of 3 of 4 zones)

CD-3

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Address Sign2 sf1 per addressMounted on the buildingUnlockTable 7.1.2.B-1, Table 7.1.2.B-2 (Address Sign)
Plaque Sign2 ft (mounting height max. 7 ft.)1 sf18 in.1 per Principal FrontagePrincipal Frontage, within 10 ft of entranceUnlockTable 7.1.2.B-2 (Plaque Sign)

CD-4, CD-4C, CD-4HV, CD-OI, CV

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Awning SignWidth of façadeMin. 8 ft. depth/projection, or back of curb, whichever is less.1 per windowOn awning valance covering window, max. 1 awning sign per windowUnlockTable 7.1.2.B-2 (Awning Sign)
Band Sign3 ft.100% of facadeMax. projection 7 in., Min. clearance 7 ft.1 per Facade plus 1 per first floor Business FrontageFlat against the Facade above main entrance, first Story Facade only—not above roof lineUnlockTable 7.1.2.B-2 (Band Sign)
Blade Sign4 ft.8 sf2 ft.Max. projection 4 ft.1 per BusinessFirst floor, perpendicular to Building Facade, min 8 ft. clearance above sidewalkUnlockTable 7.1.2.B-2 (Blade Sign)
Directory Sign3 ft.6 sf2 ft.1 per ground floor entrance to upper floor Business(es)Attached to and parallel with first floor Facade; 1 per ground floor entrance to upper floor businessesUnlockTable 7.1.2.B-2 (Directory Sign)
Plaque Sign2 ft. (mounting height max. 7 ft.)1 sf18 in.1 per Principal FrontagePrincipal Frontage, within 10 ft. of entranceUnlockTable 7.1.2.B-2 (Plaque Sign)
Porch Sign2 ft.6 sf100% width of entrance1 per address (2 for Corner Building)Above porch entrance/architrave, parallel to Building Facade.UnlockTable 7.1.2.B-2 (Porch Sign)
Post Sign6 ft. (apex)12 sf48 in.1 per BuildingFirst Lot Layer, perpendicular to Building FacadeUnlockTable 7.1.2.B-2 (Post Sign)
Sidewalk Sign48 in.10 sf30 in.1 per BusinessDirectly in front of the business; not to reduce sidewalk width less than 5 ft.UnlockTable 7.1.2.B-2 (Sidewalk Sign)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Temporary Sign (Single-Family/Two-Family/Multi-Family Residential Use)5 ft. from ground8 sf per sideMin. 5 ft. from property line; not to obstruct driver visibility2 per lot or building siteOn pole or stake affixed to groundUnlockSection 7.1.7.A, 7.1.10.5
Temporary Sign (Other Uses)5 ft. from ground (unless affixed as banner)24 sf per side5 ft. from property line; not in way of driver visibility.2 per lot or building siteOn pole or stake in ground or as a banner affixed to buildingUnlockSection 7.1.7.B, 7.1.10.5
Occupant Rear Door Sign6 sfFlush against rear entrance door of buildingUnlockSection 7.1.8.N

PermitPal covers all 4 zoning districts in Nolensville — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 4 zones for Nolensville — start free

Prohibited Signs in Nolensville

  • No billboards or off-premises signs are permitted except as otherwise allowed by T.C.A. Title 54, Chapter 21.
  • No signs are permitted in public rights-of-way except as expressly allowed under this Article.
  • Portable signs other than sidewalk signs are not permitted.
  • Signs in upper floor windows are not permitted, except for window signs for an occupant that is separate from the occupant of the ground floor.
  • All signs that do not conform to this Section 7.1 shall be removed pursuant to Section 1.22.
  • No sign may be illuminated with or include animated, moving, intermittent, or flashing lights, or other active lighting.
  • No sign may have any moving component or element.
  • No sign may have changeable copy except for an outdoor display case.
  • No sign may by design or arrangement imitate the size, color, lettering, illumination, word, phrase, or symbol of a traffic safety control sign.
  • Where a lot or building site adjoins another lot or building site, no freestanding sign shall be permitted within a triangle formed by the side lot or building site line, the front lot or building site line, and a line beginning on the side lot or building site line at the required front setback distance and extended at 45 degrees to the front lot or building site line for an existing building.
  • No sign may be within or overhang a public right-of-way or required setback other than a wall sign that does not overhang such right-of-way more than fifteen inches, a blade sign, or an awning sign.
  • No sign may obstruct a traffic-control device, traffic sign, or street name sign, block the vision of drivers at any driveway, street intersection or crosswalk, or be unsafe or constitute a hazard of any type.
  • No sign or sign support may be affixed to a tree, rock, utility pole or other improper sign support, or contain any attachment, other sign, symbol, flag, pennant or other attention-getting device (other than the sign itself).
  • Electronic message boards and neon signs are prohibited.

Exempt Signs in Nolensville

  • One address sign per tenant or owner.
  • Up to two on-premises signs not exceeding four square feet in area that are located along the route to a place or location within such premises or are provided for safety.
  • Signs placed by the Town or any other governmental unit with jurisdiction over the area where the sign is placed.
  • Signs carved into stone, concrete or similar material or made of bronze, aluminum, or other permanent construction and made an integral part of the structure.
  • Temporary signs allowed under Section 7.1.7.
  • Signs denoting a property as historic or in memorial of an event or person, as authorized by the Historic Zoning Commission and not exceeding four square feet per face. Such signs, if free-standing, limited to one per frontage, four feet in height, and located five feet from any lot line. Such signs, if wall signs, to be inlaid to be integral to the facade or as a plaque of aluminum or bronze permanently affixed.
  • Athletic field signs.
  • Governmental flags of the United States, the State, and the Town.

Sign Plan & Submission Notes for Nolensville

  • Design drawings of any proposed sign must be submitted to the Building Official for review of compliance with this Section prior to fabrication and installation. Drawings must include sign location and size, and indicate materials, colors, hanging or mounting device, illumination scheme, and example of lettering.
  • Except for exempt signs, no sign shall be erected, installed, or placed unless a sign permit has been issued and such permit remains in effect.

Source: municode municipal code