Questions? Call us at (262) 218-2915

Sign Regulations in Oneida, Tennessee

Oneida, Tennessee has specific sign regulations covering 34 sign types across 4 zoning districts. Regulated sign types include Real Estate Sign, Projecting Sign, Wall Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: January 14, 2026

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Oneida, Tennessee

Sample Sign Requirements in Oneida

Sign TypeMax AreaSetback
Directional Sign - Off-Premise6 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.
Directional Sign - On-PremiseNot listedNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.
Address Sign2 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for OneidaFull Coverage

Sign Types Covered

34

  • Real Estate Sign
  • Projecting Sign
  • Wall Sign
  • Three Faced Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Oneida

City WebsiteMunicipal Code2 permit application links available

Oneida, Tennessee Sign Rules at a Glance

Oneida, Tennessee regulates 34 sign types across 4 zoning districts. Construction Signs are capped at 8 feet tall and 32 square feet (Sec. 69.3.13). Most commercial signs in Oneida require a permit.

Detailed Sign Ordinance Requirements for Oneida, Tennessee

Sign Rules by Zoning District in Oneida (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
General Regulations For All Zones88 feet32 square feet
Residential Districts410 feet25 square feet
Commercial Districts (C-1, C-2)1625 feet150 square feet
Industrial District (M-1)1125 feet150 square feet

Zone-by-Zone Sign Requirements in Oneida(sample of 3 of 4 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Directional Sign - Off-PremiseNot listed6 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.4 per businessOff-premiseUnlock69.3.7
Directional Sign - On-PremiseNot listedNot listedNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Not listedOn private propertyUnlock69.3.6
Address SignNot listed2 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Not listedNot listedUnlock69.3.10
Memorial PlaqueNot listedNot listedNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Not listedNot listedUnlock69.3.11
Cluster SignNot listedNot listedNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Not listedNot listedUnlock69.3.12
Construction Sign8 feet32 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Not listedOn the site of constructionUnlock69.3.13
Temporary SignNot listedNot listedNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Not listedNot listedUnlock69.3.14
Traffic Control SignNot listedNot listedNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Not listedNot listedUnlock69.3.9

Commercial Districts (C-1, C-2)

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Ground Sign (C-1, 3 or fewer lanes)25 feet64 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Included in maximum of 2 per business (not two of the same type); 3 if fronting two parallel streets (not two of the same type per frontage)Supported by structures or supports attached to the ground, independent of any buildingUnlock69.5.10.1
Ground Sign (C-1, 4 or more lanes)25 feet80 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Included in maximum of 2 per business (not two of the same type); 3 if fronting two parallel streets (not two of the same type per frontage)Supported by structures or supports attached to the ground, independent of any buildingUnlock69.5.10.2
Ground Sign (C-2, 3 or fewer lanes)25 feet80 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Included in maximum of 2 per business (not two of the same type); 3 if fronting two parallel streets (not two of the same type per frontage)Supported by structures or supports attached to the ground, independent of any buildingUnlock69.5.11.1
Ground Sign (C-2, 4 or more lanes)25 feet96 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Included in maximum of 2 per business (not two of the same type); 3 if fronting two parallel streets (not two of the same type per frontage)Supported by structures or supports attached to the ground, independent of any buildingUnlock69.5.11.2
Roof Sign (C-1, 3 or fewer lanes)25 feet64 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Included in maximum of 2 per business (not two of the same type); 3 if fronting two parallel streets (not two of the same type per frontage)Erected to or constructed wholly upon the roof of any building and supported solely by the roof structureUnlock69.5.10.1
Roof Sign (C-1, 4 or more lanes)25 feet80 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Included in maximum of 2 per business (not two of the same type); 3 if fronting two parallel streets (not two of the same type per frontage)Erected to or constructed wholly upon the roof of any building and supported solely by the roof structureUnlock69.5.10.2
Roof Sign (C-2, 3 or fewer lanes)25 feet80 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Included in maximum of 2 per business (not two of the same type); 3 if fronting two parallel streets (not two of the same type per frontage)Erected to or constructed wholly upon the roof of any building and supported solely by the roof structureUnlock69.5.11.1
Roof Sign (C-2, 4 or more lanes)25 feet96 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Included in maximum of 2 per business (not two of the same type); 3 if fronting two parallel streets (not two of the same type per frontage)Erected to or constructed wholly upon the roof of any building and supported solely by the roof structureUnlock69.5.11.2

Industrial District (M-1)

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Projecting SignNot listed20 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Included in maximum of 2 per business (not two of the same type); 3 if fronting two parallel streets (not two of the same type per frontage)Affixed to a wall or building with leading edge extending beyond the building or wall; not less than 9 feet from the groundUnlock69.5.3 via 69.6.1
Real Estate Sign8 feet20 square feet for primary sign; 9 square feet for additional signs in multi-unit developmentsNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.1 per road frontage; one additional per unit in multi-unit developmentsNot listedUnlock69.5.6 via 69.6.1
Ground Sign (M-1, 3 or fewer lanes)25 feet80 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Included in maximum of 2 per business (not two of the same type); 3 if fronting two parallel streets (not two of the same type per frontage)Supported by structures or supports attached to the ground, independent of any buildingUnlock69.5.11.1 via 69.6.1
Ground Sign (M-1, 4 or more lanes)25 feet96 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Included in maximum of 2 per business (not two of the same type); 3 if fronting two parallel streets (not two of the same type per frontage)Supported by structures or supports attached to the ground, independent of any buildingUnlock69.5.11.2 via 69.6.1
Roof Sign (M-1, 3 or fewer lanes)25 feet80 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Included in maximum of 2 per business (not two of the same type); 3 if fronting two parallel streets (not two of the same type per frontage)Erected to or constructed wholly upon the roof of any building and supported solely by the roof structureUnlock69.5.11.1 via 69.6.1
Roof Sign (M-1, 4 or more lanes)25 feet96 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.Included in maximum of 2 per business (not two of the same type); 3 if fronting two parallel streets (not two of the same type per frontage)Erected to or constructed wholly upon the roof of any building and supported solely by the roof structureUnlock69.5.11.2 via 69.6.1
Shopping Center Sign (M-1)25 feet150 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.1 for center plus additional for tenants as specifiedNot listedUnlock69.5.7 via 69.6.1
Accessory Wall Sign10 feet6 square feetNo part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control. No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.1 per buildingAttached to and parallel to the external face of a building or wallUnlock69.6.2

PermitPal covers all 4 zoning districts in Oneida. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Oneida

  • No part of any sign shall be placed within five (5) feet of any public road right-of-way except as needed for traffic control.
  • No part of any sign shall be placed within five (5) feet of any ingress/egress except for small on-premise directional signs.
  • Signs utilizing rotating or flashing lights are not allowed.
  • Portable signs are not allowed; all existing portable signs must be removed by September 1, 1986.
  • Billboards are not allowed.

Exempt Signs in Oneida

  • On-premise directional signs and other small accessory signs may be allowed by the planning commission if necessary for public health and safety.
  • Off-premise directional signs are allowed if not more than 6 square feet in area, do not interfere with traffic or pedestrian visibility, and limited to four per business.
  • Traffic control and regulatory signs are allowed as deemed necessary by the governing body or Department of Transportation.
  • Address signs are allowed if not exceeding 2 square feet in area.
  • Memorial plaques, cornerstones, historical tablets, and similar signs are allowed with planning commission approval.
  • Cluster signs are allowed if they meet the area, height, and other requirements for the zoning district.
  • Construction signs are allowed during construction if not more than 32 square feet in area and 8 feet in height.
  • Temporary signs, including banners, are allowed for special events for up to 7 days with building inspector approval.

Sign Plan & Submission Notes for Oneida

  • A building permit is required for all signs, and applicants must provide the building inspector with a sign plan and specifications identifying the location, type, and design of proposed and existing signs.
  • Planning commission approval is required for on-premise directional signs, memorial plaques and historical signs, nonresidential uses in residential districts, additional real estate signs in multi-unit commercial developments, and accessory wall signs in industrial districts.
  • Signs for shopping centers and office centers designate the center and tenants with specific area limits, implying a coordinated sign plan for multiple businesses or offices.

Source: other municipal code

Frequently Asked Questions

In Oneida, the height limit for Ground Sign (C-1, 3 or fewer lanes) in the Commercial Districts (C-1, C-2) is 25 feet (Sec. 69.5.10.1). The height limit for Accessory Wall Sign in the Industrial District (M-1) is 10 feet (Sec. 69.6.2). Maximum sign heights range from 8 feet to 25 feet across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Oneida require a permit. From the submission notes on this page: A building permit is required for all signs, and applicants must provide the building inspector with a sign plan and specifications identifying the location, type, and design of proposed and existing signs. Run a code check for an exact address to see the permit requirements for that zone.

Oneida's sign code covers 34 sign types, including Real Estate Sign, Projecting Sign, Wall Sign, and Three Faced Sign. Most commercial signs need a permit. The ordinance lists 8 exemptions. One of them: Address signs are allowed if not exceeding 2 square feet in area. The full list is on this page.

Rules in Oneida's sign ordinance that cover digital, changing, or flashing signs: Signs utilizing rotating or flashing lights are not allowed. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Oneida Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Oneida, Tennessee, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds