Questions? Call us at (262) 218-2915

Sign Regulations in Coppell, Texas

Coppell, Texas has specific sign regulations covering 28 sign types across 4 zoning districts. Regulated sign types include Movement Control Sign, Protective Sign, Vehicular Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 27, 2026

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Coppell, Texas

Sample Sign Requirements in Coppell

Sign TypeMax HeightMax AreaSetback
Movement Control SignNot listed3 sq ft effective area per signNot listed
Protective Sign2 ft max height for detached protective signs2 sq ft effective area per signNot listed
Monument Sign - Business Districts (Sites > 2 acres)6 ft60 sq ft effective area15 ft from street ROW (10 ft in specified parking condition); 75 ft from other property lines; alternative: midpoint of frontage or ≥20 ft from side lines if midpoint not feasible.

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for CoppellFull Coverage

Sign Types Covered

28

  • Movement Control Sign
  • Protective Sign
  • Vehicular Sign
  • Government Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Coppell

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Coppell, the height limit for Pylon Sign - Highway Commercial (HC) (Conceptual PD fronting SH 121 / Sam Rayburn Tollway / IH 635) in the Business zoning districts (O, R, C, TC, HC, LI, PD with O/R/C/TC/HC/LI prefixes) is 40 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Coppell require a permit. From the submission notes on this page: Permit required: No person shall erect, construct, relocate, alter, or repair a sign without first having obtained a sign permit, except for exempted signs and government signs. Run a code check for an exact address to see the permit requirements for that zone.

Coppell's sign code covers 28 sign types, including Movement Control Sign, Protective Sign, Vehicular Sign, and Government Sign. Most commercial signs need a permit. The ordinance lists 4 exemptions. One of them: Temporary lights and holiday decorations are exempt from the sign regulations. The full list is on this page.

In Coppell, Monument Sign - Non-business (Church/Model Home/Apartment/Town Home/School/Government) in the Non-business zoning districts - Agricultural District (A) and other zoning districts must be set back at least 15 ft from public right-of-way (Sec. 12-29-5(1)-(2)). The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Coppell's sign ordinance that cover digital, changing, or flashing signs: Off‑premise signs are prohibited except as otherwise allowed under Chapter 6, Article 6-15 of the Code of Ordinances or as specifically allowed for digital signs adjacent to IH‑635 under Sec. 12‑29‑7. Luminous gaseous tubing visible from the public right‑of‑way is prohibited, including within an enclosed building behind glass, except that non‑flashing, non‑moving "open" signs without other wording or advertising are permitted. City manager permits for certain digital signs: For the limited off‑premises digital sign structures adjacent to IH‑635 on DART right‑of‑way, the city manager or designee may issue the appropriate sign and building permits as provided in the Code of Ordinances. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Coppell Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Coppell, Texas, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Coppell, Texas Sign Rules at a Glance

Coppell, Texas regulates 28 sign types across 4 zoning districts. Monument Signs - Business Districts (Sites > 2 acres) in the Business zoning districts (O, R, C, TC, HC, LI, PD with O/R/C/TC/HC/LI prefixes) are capped at 6 ft tall. Most commercial signs in Coppell require a permit.

Detailed Sign Ordinance Requirements for Coppell, Texas

Sign Rules by Zoning District in Coppell (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones92 ft max height for detached protective signs3 sq ft effective area per signNot listed
Business zoning districts (O, R, C, TC, HC, LI, PD with O/R/C/TC/HC/LI prefixes)1540 ft800 sq ft maximum per elevation (face)Not listed
Non-business zoning districts - Agricultural District (A); Single-Family Residential Estate District (SF-ED); Single-Family Residential District (SF-18, SF-12, SF-9, SF-7); Two-Family Residential District (2F-9); Town House Residential District 1 (TH-1); Town House Residential District 2 (TH-2); Multi-Family Residential District 1 (MF-1); Multi-Family Residential District 2 (MF-2); Manufactured Home Park District (MH); Flood Plain District (FP); Historic District (H); Special Use Permit (SUP); Planned Development District (PD) without O/R/C/TC/HC/LI prefixes2Not listed36 sq ft effective area per monument signNot listed
General Regulations For All Zones (Nonconforming & Digital Off-premise)2Not listedNo specific sq ft limit in provided text; must meet TxDOT and federal standards for I-635.Not listed

Zone-by-Zone Sign Requirements in Coppell(sample of 3 of 4 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Movement Control SignNot listed3 sq ft effective area per signNot listedNot listedNo limit on number, subject to compliance with other requirements.On any occupancy or any premises other than single-family or duplex premises; may be attached or detached; must be on the premises being served and used only to direct movement within or onto that premises.Not listedUnlockSec. 12-29-3(2)(A)
Protective Sign2 ft max height for detached protective signs2 sq ft effective area per signNot listedNot listedNo more than 2 per premises.On any premises; typical examples include 'bad dog', 'no trespassing', 'no solicitors'.Not listedUnlockDefinitions: Sign, protective; Sec. 12-29-3(2)(B)
Vehicular SignNot listedNot listedNot listedNot listedNot listedOn vehicles used principally for transportation; sign must not project beyond vehicle surface and must not obstruct driver vision from any angle.Not listedUnlockDefinitions: Sign, vehicular; Sec. 12-29-3(2)(C); Sec. 12-29-3(3)(K)
Government SignNot listedNot listedNot listedNot listedNot listedWhere legally required or necessary to essential functions of government.Not listedUnlockSec. 12-29-3(2)(D)
Holiday Lights and DecorationsNot listedNot listedNot listedNot listedNot listedAnywhere on premises, subject to other codes.Not listedUnlockSec. 12-29-3(2)(E)
Flag - National/State/CityNot listedNot listedNot listedNot listedNot listedOn flagpoles or other appropriate locations on premises.Not listedUnlockSec. 12-29-3(4)(A)
Corporate FlagNot listedNot listedNot listedNot listed1 corporate flagpole per business location.On a flagpole at a business location.Not listedUnlockSec. 12-29-3(4)(B)
Monument Sign - General Lighting RuleNot listedNot listedNot listedNot listedNot listedAny zoning district where monument signs are otherwise allowed by sections 12-29-4 or 12-29-5.Not listedUnlockSec. 12-29-3(9)

Business zoning districts (O, R, C, TC, HC, LI, PD with O/R/C/TC/HC/LI prefixes)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Monument Sign - Business Districts (Sites > 2 acres)6 ft60 sq ft effective areaNot listed15 ft from street ROW (10 ft in specified parking condition); 75 ft from other property lines; alternative: midpoint of frontage or ≥20 ft from side lines if midpoint not feasible.1 monument sign per premises for sites > 2 acres, except as modified for multiple frontages and industrial conditions in 12-29-4(2)(C).On a business-zoned premises (O, R, C, TC, HC, LI, or PD with those prefixes). One monument sign per premises for sites greater than 2 acres.Not listedUnlockSec. 12-29-4(2)(A)-(B)i; Sec. 12-29-3(9)
Monument Sign - Business Districts (Sites ≤ 2 acres)4 ft40 sq ft effective areaNot listed15 ft from street ROW (10 ft in specified parking condition); 75 ft from other property lines; or midpoint / ≥20 ft from side lines if applicable.1 monument sign per premises for sites ≤ 2 acres, subject to multiple-frontage and industrial provisions.On business-zoned premises of 2 acres or less.Not listedUnlockSec. 12-29-4(2)(A)-(B)ii; Sec. 12-29-3(9)
Monument Sign - Business Districts (Two Signs, Premises > 2 acres, Not Corner Lot)4 ft per sign40 sq ft per signNot listed15 ft from street ROW (10 ft in specified parking condition); 75 ft from other property lines; midpoint / ≥20 ft from side lines if lot width <150 ft.Max 1 per street frontage; max total 2 per premises under this option.On business-zoned premises > 2 acres, not a corner lot, having frontage on two or more streets.Not listedUnlockSec. 12-29-4(2)(C)i; Sec. 12-29-3(9)
Monument Sign - Business Districts (Two Signs, Premises > 5 acres with ≥500 ft Frontage on Each Street)6 ft per sign60 sq ft per signNot listed15 ft from street ROW (10 ft in specified condition); 75 ft from other property lines; midpoint / ≥20 ft from side lines, if applicable.Max 1 per street frontage; max total 2 per premises under this option.On business-zoned premises > 5 acres, with frontage on more than one street and with at least 500 ft frontage on each street.Not listedUnlockSec. 12-29-4(2)(C)ii; Sec. 12-29-3(9)
Monument Sign - Industrial Premises with Multiple Streets (Non-LI-specific rule for industrial zoning)6 ft per sign60 sq ft per signNot listed15 ft from street ROW; 75 ft from other property lines.1 per 10 acres, but not more than 1 per building per adjacent street and 2 per building total.On premises zoned for industrial uses (e.g., LI or HI) having frontage on more than one street and with at least 500 ft frontage on each street.Not listedUnlockSec. 12-29-4(2)(C)iii; Sec. 12-29-3(9)
Industrial Park Identification Monument Sign (Master Planned >100 acres)6 ft per sign60 sq ft per signNot listed15 ft from street ROW; 75 ft from other property lines not fronting street ROW.Maximum 2 per qualifying industrial park.At master planned industrial parks exceeding 100 acres.Not listedUnlockSec. 12-29-4(2)(C)iv; Sec. 12-29-3(9)
Pylon Sign - Highway Commercial (HC) (Conceptual PD fronting SH 121 / Sam Rayburn Tollway / IH 635)40 ft800 sq ft maximum per elevation (face)Not listed15 ft minimum from street ROW; within 50 ft of street ROW (farthest point); 75 ft from property lines other than those fronting street ROW; 200 ft minimum from residentially zoned property.1 pylon sign per Conceptual Planned Development fronting the specified highways, in addition to allowable monument signage.Within Highway Commercial zoning district as part of a Conceptual Planned Development fronting SH 121, Sam Rayburn Tollway or IH 635.Not listedUnlockSec. 12-29-4(3)(A) i–xv
Attached Sign - Industrial (LI) Wall SignMaximum letter/logo height by wall height: 0–50 ft wall: 48 in; 50–100 ft: 60 in; 100–150 ft: 72 in; 150–200 ft: 84 in; above 200 ft: 96 in. One letter or logo may be 25% taller than these limits.Per elevation: 0–50 ft wall height: 200 sq ft; 50–100 ft: 250 sq ft; 100–150 ft: 300 sq ft; 150–200 ft: 350 sq ft; above 200 ft: 400 sq ft. Also may not exceed 75% of wall width (or wall height if vertical).Not listedNot listed1 attached sign per elevation per business; rear wall signs prohibited.On elevations (facades) of buildings within LI-zoned property.Not listedUnlockSec. 12-29-4(4)(A)h; Sec. 12-29-4(4)(D) i–ii

Non-business zoning districts - Agricultural District (A); Single-Family Residential Estate District (SF-ED); Single-Family Residential District (SF-18, SF-12, SF-9, SF-7); Two-Family Residential District (2F-9); Town House Residential District 1 (TH-1); Town House Residential District 2 (TH-2); Multi-Family Residential District 1 (MF-1); Multi-Family Residential District 2 (MF-2); Manufactured Home Park District (MH); Flood Plain District (FP); Historic District (H); Special Use Permit (SUP); Planned Development District (PD) without O/R/C/TC/HC/LI prefixes

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Monument Sign - Non-business (Church/Model Home/Apartment/Town Home/School/Government)Not listed36 sq ft effective area per monument signNot listedStandard: minimum 15 ft from public ROW; model home sign: minimum 3 ft from sidewalk; no explicit setback from side/rear property lines given.Base 1 per premises; plus 1 additional per 750 ft of additional frontage beyond first 750 ft; least 750 ft separation between detached monuments.On premises in non-business districts used as churches, model homes, apartments, town homes, schools, or government facilities/buildings, and on signs within 25 ft of a non-business zoning district boundary.Not listedUnlockSec. 12-29-5(1)-(2)
Attached Sign - Non-business (Church/Model Home/Apartment/Town Home/School/Government)Not listed36 sq ft effective areaNot listedNot listed1 attached sign per qualifying premises.On buildings used as churches, model homes, apartments, town homes, schools, or government facilities/buildings in non-business zoning districts, and on such premises within 25 ft of non-business district boundaries.Not listedUnlockSec. 12-29-5(1),(3)

PermitPal covers all 4 zoning districts in Coppell. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Coppell

  • No person shall erect, construct, relocate, alter, or repair a sign without first having obtained a sign permit, except as otherwise provided in the sign regulations; this requirement does not apply to government signs.
  • No sign shall be erected, repaired, or altered in violation of the electrical code of the city.
  • No person shall cause to be erected or maintained any sign using any combination of forms, words, colors, or lights which imitate standard public traffic regulatory or emergency signs or signals.
  • Portable signs are prohibited.
  • Balloons, streamers, bunting, banners, flags, flag poles, pole signs, or signs that contain moving parts are prohibited unless otherwise specifically allowed by the sign regulations.
  • Signs erected in violation of the building code or electrical code of the city are prohibited.
  • Signs attached to or maintained upon any tree or public utility pole or structure are prohibited.
  • Signs attached to or painted on the outside of a fence, railing, or wall that is not a structural part of a building are prohibited.
  • Signs attached to or painted on any sidewalk, curb, gutter, or street are prohibited, except house address numbers.
  • Signs illuminated to an intensity that causes glare or brightness to a degree that could constitute a hazard or nuisance are prohibited.
  • Signs that move, flash light intermittently, change color or revolve are prohibited unless specifically allowed by the sign regulations.
  • Off‑premise signs are prohibited except as otherwise allowed under Chapter 6, Article 6-15 of the Code of Ordinances or as specifically allowed for digital signs adjacent to IH‑635 under Sec. 12‑29‑7.
  • Signs erected in the public right‑of‑way are prohibited except as otherwise allowed in Chapter 6, Article 6-15 of the Code of Ordinances or as specifically exempted elsewhere in the sign regulations.
  • Signs attached to a vehicle advertising the sale of the vehicle are prohibited where the vehicle is parked in such a way that the sign attracts the attention of or informs persons using the public right‑of‑way.
  • Luminous gaseous tubing visible from the public right‑of‑way is prohibited, including within an enclosed building behind glass, except that non‑flashing, non‑moving "open" signs without other wording or advertising are permitted.
  • A‑framed signs, including signs located in the back of a truck or other vehicle, are prohibited.
  • Can signs made of plastic or similar translucent materials are prohibited.
  • Signs attached to roofs or canopies are prohibited.
  • Signs which advertise or refer to the sale or consumption of alcoholic beverages by words or symbols are prohibited.
  • No person shall display on any sign any obscene, indecent, or immoral matter; any such matter must be removed, or the sign removed, within 24 hours of notice.
  • Obsolete signs, including signs relating to a product no longer available for purchase or to a business which has closed or relocated, must be removed or have their advertising copy removed within 30 days of obsolescence; painted wall signs must be painted over so the message is not visible.
  • Signs and sign supports must be maintained in a state of good repair and neat appearance at all times.
  • Graffiti is prohibited within the city and must be removed by the property owner within 72 hours of notice.

Exempt Signs in Coppell

  • Government signs that are legally required or necessary to the essential functions of government agencies, such as flags, insignia, legal notices, or informational, directional, or traffic signs, are exempt from the sign regulations.
  • Temporary lights and holiday decorations are exempt from the sign regulations.
  • National, state, or city flags are expressly allowed and not restricted by the general flag provisions other than overall conformity to the ordinance.
  • One corporate flag and flag pole per business location is allowed for a bona fide company or corporate office located within the city (generally applicable in all zones where such a business may exist).

Sign Plan & Submission Notes for Coppell

  • Permit required: No person shall erect, construct, relocate, alter, or repair a sign without first having obtained a sign permit, except for exempted signs and government signs.
  • Electrical permit required: Prior to issuance of a sign permit for any sign with electrical wiring and connections, an electrical permit must be obtained; the electrical inspector must find compliance with the city electrical code.
  • Repair permit required: It is unlawful to repair or make alterations (excluding repainting to restore original conforming colors) to any permitted sign without first obtaining a repair permit and paying the required fee.
  • Late permit penalty: Any person who erects, places, alters, repairs, or relocates a sign, or commences work thereon, without first having obtained a permit, must pay a late fee equal to twice the applicable sign permit fee.
  • Permit expiration: A sign permit expires if work is not commenced within 45 days from issuance or if work is suspended or abandoned for 45 days after commencement.
  • Board of adjustment variances: The board of adjustment may authorize variances to the requirements of the sign regulations in Sec. 12‑29 (i.e., a formal variance process is available when compliance is not feasible).
  • City manager permits for certain digital signs: For the limited off‑premises digital sign structures adjacent to IH‑635 on DART right‑of‑way, the city manager or designee may issue the appropriate sign and building permits as provided in the Code of Ordinances.
  • Movement control and protective signs: These are generally allowed subject to size and content limits and are treated as premise signs that must comply with all other applicable provisions, including permitting where applicable.
  • Impoundment context: Any sign erected in or over a public right‑of‑way contrary to the ordinance may be removed and impounded by the city without notice, indicating enforcement of permitting and location requirements.

Source: municode municipal code