Sign Regulations in Kemp, Texas
Kemp, Texas has specific sign regulations covering 6 sign types across 2 zoning districts. Regulated sign types include Freestanding Sign, Monument Sign, Attached Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Kemp, Texas
Sample Sign Requirements in Kemp
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Freestanding Sign | 22 feet (up to 35 feet by variance where visibility is affected by elevated highways); up to 75 feet if on US Highway Business 175 or State Highway 274 within 1,800 feet | 40 square feet | Not listed |
| Monument Sign | 7 feet (measured from the top of adjacent curb) | Not listed | 20 ft from property line adjacent to street; 10 ft from property line abutting nonresidential/multifamily; 20 ft from side abutting single-family |
| Attached Sign | No higher than roof line (for one-story); no higher than floor of second story (for first floor of multi-story); for second floor or 2-story, no higher than roof line; for multi-story, no higher than floor of third story | 40 square feet or 30% of signable area (whichever is less) | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
6
- Freestanding Sign
- Monument Sign
- Attached Sign
- Portable Sign
- +2 more types
Zoning Districts
2
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Kemp
Frequently Asked Questions
In Kemp, the height limit for Monument Sign in the Commercial District, Industrial District, Manufacturing/Industrial District is 7 feet (measured from the top of adjacent curb) (Sec. 30-116). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Kemp require a permit. From the submission notes on this page: No indication of a requirement for master sign plan, sign plan, or variance meeting except that variances may be requested for height increases for certain freestanding signs. Run a code check for an exact address to see the permit requirements for that zone.
Kemp's sign code covers 6 sign types, including Freestanding Sign, Monument Sign, Attached Sign, and Portable Sign. Most commercial signs need a permit. The ordinance lists 1 exemption. One of them: Non-illuminated street address numbers and placards which identify the activity may be used in addition to other attached signs, subject to area limitations. The full list is on this page.
In Kemp, Monument Sign in the Commercial District, Industrial District, Manufacturing/Industrial District must be set back 20 ft from property line adjacent to street (Sec. 30-116). The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Kemp's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research Kemp Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Kemp, Texas, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Kemp, Texas Sign Rules at a Glance
Kemp, Texas regulates 6 sign types across 2 zoning districts. Freestanding Signs in the Commercial District, Industrial District, Manufacturing/Industrial District are capped at 40 square feet. Most commercial signs in Kemp require a permit.
Detailed Sign Ordinance Requirements for Kemp, Texas
Sign Rules by Zoning District in Kemp (2 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Commercial District, Industrial District, Manufacturing/Industrial District | 4 | 22 feet (up to 35 feet by variance where visibility is affected by elevated highways); up to 75 feet if on US Highway Business 175 or State Highway 274 within 1,800 feet | 40 square feet | Not listed |
| General Regulations For All Zones | 2 | Not listed | 10 square feet for single tenant buildings; 6 square feet for multiple tenant buildings | Not listed |
Zone-by-Zone Sign Requirements in Kemp
Commercial District, Industrial District, Manufacturing/Industrial District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign | 22 feet (up to 35 feet by variance where visibility is affected by elevated highways); up to 75 feet if on US Highway Business 175 or State Highway 274 within 1,800 feet | 40 square feet | Not listed | Not listed | 1 per site unless auxiliary; 2 monument signs in lieu if frontages on two non-intersecting streets | On-premises, upon commercial or industrial zoned property | Not listed | Unlock | Sec. 30-25, Sec. 30-54, Sec. 30-55 |
| Monument Sign | 7 feet (measured from the top of adjacent curb) | Not listed | Not listed | 20 ft from property line adjacent to street; 10 ft from property line abutting nonresidential/multifamily; 20 ft from side abutting single-family | Up to 2 if site fronts two non-intersecting streets | On-premises; at least 20 ft from frontage property line adjacent to street; at least 10 ft from property line abutting nonresidential or multifamily use; 20 ft from side property line abutting single-family residence | Not listed | Unlock | Sec. 30-116 |
| Attached Sign | No higher than roof line (for one-story); no higher than floor of second story (for first floor of multi-story); for second floor or 2-story, no higher than roof line; for multi-story, no higher than floor of third story | 40 square feet or 30% of signable area (whichever is less) | Not listed | Not listed | 1 per occupied facade per activity; up to 2 per building for single activity with multiple street frontages | On building facade occupied by activity; on public entrance/frontage; must be attached to building wall, canopy fascia, or sign band | Not listed | Unlock | Sec. 30-84, Sec. 30-85, Sec. 30-86 |
| Portable Sign | Not listed | Not listed | Not listed | Not listed | Not listed | On-premises, commercial or industrial zoned property | Not listed | Unlock | Sec. 30-25 |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Non-illuminated Address Number / Placard | Not listed | 10 square feet for single tenant buildings; 6 square feet for multiple tenant buildings | Not listed | Not listed | Not listed | On building | Not listed | Unlock | Sec. 30-85(b) |
| Attached Sign (Prohibited Type) | Not listed | Not listed | Not listed | Not listed | Not listed | On a wall or building where sign face is not parallel to mounting surface | Not listed | Unlock | Sec. 30-86 |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Kemp with a free PermitPal account.
Run a free code checkProhibited Signs in Kemp
- All on-premises signs must be designed and constructed to withstand a wind pressure of not less than 30 pounds per square foot of area and must be constructed to receive dead loads as required by the building code or other ordinances of the city.
- No freestanding sign shall project beyond the roof or parapet wall lines of a building located on the same site, except by variance.
- Projecting signs which are mounted on a wall or a building or other architectural element in such a manner that the sign face is not parallel with the face of the wall, building or other architectural element to which the sign is mounted will be prohibited.
Exempt Signs in Kemp
- Non-illuminated street address numbers and placards which identify the activity may be used in addition to other attached signs, subject to area limitations.
Sign Plan & Submission Notes for Kemp
- No indication of a requirement for master sign plan, sign plan, or variance meeting except that variances may be requested for height increases for certain freestanding signs.
Source: municode municipal code