Sign Regulations in Kermit, Texas
Kermit, Texas has specific sign regulations covering 5 sign types across 7 zoning districts. Regulated sign types include Freestanding Sign, Attached Sign, Wall Sign. Height restrictions apply. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 9, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Kermit, Texas
Sample Sign Requirements in Kermit
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Freestanding Sign | 8 feet | N/A | Not listed |
| Attached Sign | Not listed | No limit within size allocation | Not listed |
| Wall Sign | Not listed | 80 sq. ft. | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
5
- Freestanding Sign
- Attached Sign
- Wall Sign
- Portable Sign
- +1 more types
Zoning Districts
7
Different zoning districts with specific sign regulations
Data Includes
- Height restrictions
- Illumination rules
Other Cities in Texas
Frequently Asked Questions
In Kermit, the height limit for Freestanding Sign in the Commercial District (C-1, C-2) is 20 feet for C-1, 30 feet for C-2. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
We haven't published Kermit's application steps on this page yet. Run a code check for an exact address to see the permit requirements for that zone.
Kermit's sign code covers 5 sign types, including Freestanding Sign, Attached Sign, Wall Sign, and Portable Sign. The ordinance lists 9 exemptions. One of them: Signs located on or within city park and recreation facilities. The full list is on this page.
We haven't published Kermit's sign setback rules on this page yet. Run a code check for an exact address to see them.
Rules in Kermit's sign ordinance that cover digital, changing, or flashing signs: Animated signs. Blinking or flashing signs. Intermittent signs. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Kermit Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Kermit, Texas, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Kermit, Texas Sign Rules at a Glance
Kermit, Texas regulates 5 sign types across 7 zoning districts. Electronic Message Displays are capped at 40 square feet.
Detailed Sign Ordinance Requirements for Kermit, Texas
Sign Rules by Zoning District in Kermit (7 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Residential District (R-1, R-2, R-3) | 2 | 8 feet | N/A | Not listed |
| Commercial District (C-1, C-2) | 2 | 20 feet for C-1, 30 feet for C-2 | 150 square feet for C-1, 180 square feet for C-2 | Not listed |
| CBD District | 2 | 20 feet | 80 sq. ft. | Not listed |
| Industrial District (I-1, I-2) | 2 | 34 feet | 250 square feet for I-1 | Not listed |
| AG | 2 | 8 feet | 80 square feet for nonresidential uses | Not listed |
| MFH [MH] | 1 | Not listed | 32 square feet for nonresidential uses and multi-family uses | Not listed |
| General Regulations For All Zones | 2 | 14 feet or top of wall, whichever is less | 40 square feet | Not listed |
Zone-by-Zone Sign Requirements in Kermit(sample of 3 of 7 zones)
Residential District (R-1, R-2, R-3)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign | 8 feet | N/A | Not listed | Not listed | 1 for R-1, R-2; 2 for R-3 | Not listed | Not listed | Unlock | Specific standards for signs in residential and AG districts table |
| Attached Sign | Not listed | No limit within size allocation | Not listed | Not listed | No limit within size allocation for R-3 | Not listed | Not listed | Unlock | Specific standards for signs in residential and AG districts table |
Commercial District (C-1, C-2)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign | 20 feet for C-1, 30 feet for C-2 | 150 square feet for C-1, 180 square feet for C-2 | Not listed | Not listed | 1 for C-1, 2 for C-2 | Not listed | Not listed | Unlock | Specific standards for signs in commercial and industrial districts table |
| Attached Sign | Not listed | 45 sq. ft. for C-1, 100 sq. ft. for C-2 | Not listed | Not listed | No limit within size allocation | Not listed | Not listed | Unlock | Specific standards for signs in commercial and industrial districts table |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Portable Sign | Not listed | 30 square feet in area in nonresidential districts and 16 square feet in area in residential districts | Not listed | Not listed | Not listed | Shall not be attached to any sign pole or light pole on public or private property, or public utility poles or trees on either public or private property | Not listed | Unlock | General sign regulations |
| Electronic Message Display | 14 feet or top of wall, whichever is less | 40 square feet | Not listed | Not listed | No more than one per lot | No closer than 100 feet from the nearest residence district or office residence district property line | Not listed | Unlock | General sign regulations |
PermitPal covers all 7 zoning districts in Kermit. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Kermit
- Abandoned signs.
- Animated signs.
- Balloon signs.
- Blinking or flashing signs.
- Inflatable signs.
- Intermittent signs.
- Moving signs or signs with swinging parts or elements.
- Signs emitting sound, smoke, or odors.
- Signs attached or painted on trees, rocks, fences, or natural features.
- Signs in the right-of-way except for those placed by a public entity, approved banners on utility or light poles, projecting signs as allowed in this division, or other signs approved by the city.
- Signs or sign support structures that obstruct means of egress, including any fire escape, window, door opening, stairway, opening, exit, walkway, utility access or fire department connection.
- Signs that interfere with any required opening for ventilation.
- Signs or sign structures which resemble, imitate, simulate, or conflict with traffic-control signs or devices included in the Manual of Uniform Traffic Control Devices, which otherwise mislead or confuse persons traveling on public streets, which create a traffic hazard.
- Signs displayed on motor vehicles and portable storage units, unless the vehicle or storage units are functional and used for their primary purpose, the display is incidental to the use, and the motor vehicle is parked in a designated parking or loading space, and the storage unit is in a location that complies with all standards of this Zoning Code.
- Signs not expressly allowed by this division.
Exempt Signs in Kermit
- Building identification signs not exceeding one (1) square foot in area for residential buildings and two (2) square feet in area for nonresidential buildings.
- Business name and address on an entry door not exceeding two (2) square feet in area.
- Signs posted on a community bulletin board not exceeding 11 x 17 inches.
- Signs located on residential property under four (4) square feet in size, not including portable signs.
- Historical plaques erected and maintained by nonprofit organizations, building cornerstones, and date-constructed stones not exceeding four (4) square feet in area.
- Signs or displays located entirely inside of a building and not visible from the building’s exterior.
- Signs intended to be readable from within a parking area but not readable beyond the boundaries of the lot or parcel upon which they are located or from any public right-of-way.
- Signs located on or within city park and recreation facilities.
- Governmental signs, including emergency and warning signs necessary for public safety or civil defense, traffic signs erected and maintained by an authorized public agency, signs required to be displayed by law, signs directing the public to points of interest, and signs showing the location of public facilities.
Sign Plan & Submission Notes for Kermit
- For projects with an overall site area more than three (3) acres, an applicant may submit a sign master plan, detailing the size, location, and design of all signs on the site. The sign master plan may adjust the strict application of these standards but must clarify the exact nature of the adjustments. Such a sign master plan shall be approved by the city council after review and recommendation by the commission.