Sign Regulations in Mount Vernon, Texas
Mount Vernon, Texas has specific sign regulations covering 12 sign types across 3 zoning districts. Regulated sign types include Wall Sign, Window Sign, Projecting Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Sign Regulation Overview for Mount Vernon, Texas
Sample Sign Requirements in Mount Vernon
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Window Sign | — | No more than 30% of total glass area | — |
| Projecting Sign | 5 ft max | No more than 15 sq ft in size | — |
| Hanging Sign (Non-Canopy) | — | 8 sq ft max | — |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
12
- Wall Sign
- Window Sign
- Projecting Sign
- Hanging Sign (Non-Canopy)
- +2 more types
Zoning Districts
3
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Mount Vernon
Other Cities in Texas
Frequently Asked Questions
Sign height limits in Mount Vernon vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.
To get a sign permit in Mount Vernon, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Mount Vernon, regulated sign types include Wall Sign, Window Sign, Projecting Sign, Hanging Sign (Non-Canopy), and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
Sign setback requirements in Mount Vernon vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.
Digital and LED signs in Mount Vernon are regulated with specific requirements for brightness, animation, and message duration. Mount Vernon has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.
Ready to Research Mount Vernon Sign Permits?
Stop spending hours searching through municipal codes. Get instant access to Mount Vernon, Texas sign regulations with PermitPal's AI-powered platform.
No credit card required · Get results in seconds
Mount Vernon, Texas Sign Rules at a Glance
Mount Vernon, Texas regulates 12 sign types across 3 zoning districts. Sandwich Board Signs in the Downtown Commercial Historic District, Historic Commercial District, Central Business District zoning district are capped at 4 ft tall, 12 sq ft per side, and 3 ft wide (Sec. Sec. 5.2-53(d)(2)(i)). Most commercial signs in Mount Vernon require a permit.
Detailed Sign Ordinance Requirements for Mount Vernon, Texas
Sign Rules by Zoning District in Mount Vernon (3 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Downtown Commercial Historic District, Historic Commercial District, Central Business District | 9 | 5 ft max | No more than 50% of the canopy's width | — |
| Historic Residential Districts of Mount Vernon | 1 | — | — | — |
| General Regulations For All Zones | 2 | — | — | — |
Zone-by-Zone Sign Requirements in Mount Vernon
Downtown Commercial Historic District, Historic Commercial District, Central Business District
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign | — | — | — | — | — | Above the transom and below the second floor window in the sign frieze. Should not obscure architectural details. Should not cover windows or significant architectural features. | — | Unlock | Sec. 5.2-53(d)(2)(c), Sec. 5.2-53(d)(2)(a), Sec. 5.2-53(e)(1)-(4), Sec. 5.2-53(f)-(g) |
| Window Sign | — | No more than 30% of total glass area | — | — | — | Windows (should not cover transoms or block exterior views). | — | Unlock | Sec. 5.2-53(d)(2)(b), (h)(3) |
| Projecting Sign | 5 ft max | No more than 15 sq ft in size | — | — | — | Must provide at least 8 ft clearance from sidewalk surface to bottom of sign. May project up to 1/2 the sidewalk width, but no closer to curb than 2.5 ft. | — | Unlock | Sec. 5.2-53(d)(2)(d)-(e), Sec. 5.2-53(e) |
| Hanging Sign (Non-Canopy) | — | 8 sq ft max | — | — | — | Must have at least 8 ft clearance between sidewalk and bottom of sign. | — | Unlock | Sec. 5.2-53(d)(2)(f)-(g), Sec. 5.2-53(e) |
| Hanging Sign (Under Canopy) | — | No more than 50% of the canopy's width | — | — | — | Under canopy; min clearance 7 ft between sidewalk and bottom of sign. | — | Unlock | Sec. 5.2-53(d)(2)(f) |
| Awning/Canopy Sign | — | — | — | — | — | On awnings or canopies | — | Unlock | Sec. 5.2-53(c)(3)-(5), (d)(4)-(5), Sec. 5.2-53(e) |
| Sandwich Board Sign | 4 ft | 12 sq ft per side | 3 ft | — | — | Private property only; not on public right-of-way. | — | Unlock | Sec. 5.2-53(d)(2)(i) |
| Freestanding Sign | 5 ft | 6 sq ft per side | 3 ft | — | — | Private property only; not on public right-of-way. | — | Unlock | Sec. 5.2-53(d)(2)(j) |
Historic Residential Districts of Mount Vernon
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign (Residential Use) | — | — | — | — | — | — | — | Unlock | Sec. 5.2-50 paragraph referencing applicability to residential properties |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Billboard | — | — | — | — | — | — | — | Unlock | Sec. 5.2-53(d)(2)(k) |
| Plastic Permanent Sign | — | — | — | — | — | — | — | Unlock | Sec. 5.2-53(d)(2)(h) |
Illumination rules, size formulas, and permit requirements for every sign type in Mount Vernon are available with a free PermitPal account.
Start freeProhibited Signs in Mount Vernon
- Signs shall not obscure or compete with architectural details of the building.
- Signs should not cover windows or other architectural features.
- Old and obsolete signs should be removed to reduce visual clutter.
- Permanent signs of plastic construction should not be used in the historic commercial district.
- Billboards are prohibited.
- Flashing signs shall not be used.
- Internal illumination and back lighted signs shall not be used.
- Internally illuminated awnings shall not be used.
- Unpainted brick shall not be painted.
- Sandblasting (mechanical cleaning/abrasive cleaning) shall not be used on masonry or historic materials.
- Flat, fixed metal awnings and sloped, slatted aluminum awnings are not recommended.
- Modern aluminum doors and clear aluminum window frames or screens are not recommended.
- Burglar bars shall not be used.
- Stucco shall not be used.
- A sandwich board sign shall not be placed on public right-of-way.
- A freestanding sign shall not be placed on public right-of-way.
Exempt Signs in Mount Vernon
- Existing signs within the historic commercial district are grandfathered.
- Aluminum frames of similar profiles may be used for windows where original wooden frames cannot be duplicated.
Sign Plan & Submission Notes for Mount Vernon
- New signs shall comply with these design guidelines and with all applicable signage ordinances of the City of Mount Vernon and State of Texas.
- Wall murals may be painted on blank building walls subject to the granting of a certificate of appropriateness by the landmark commission.
- The landmark commission shall allow options for placement of signs to accommodate property owners within the historic commercial district.
- The landmark commission is responsible for issuing a certificate of appropriateness for alterations, including signage.
- Each building must be reviewed on an individual basis both by the property owner and by the landmark commission for appropriateness.
Source: municode municipal code