Sign Regulations in Tyler, Texas
Tyler, Texas has specific sign regulations covering 24 sign types across 13 zoning districts. Regulated sign types include Flag, Wall Sign, Window Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 20, 2025
Sign Regulation Overview for Tyler, Texas
Sample Sign Requirements in Tyler
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Window Sign | — | 25% of window area per elevation | — |
| Flag | 35 ft (flagpole) | 24 sq. ft. per flag | — |
| Wall Sign / Façade Sign (Single-Family and Two-Family Districts) | — | 1 sq. ft. | — |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
24
- Flag
- Wall Sign
- Window Sign
- Wall Sign / Façade Sign (Single-Family and Two-Family Districts)
- +2 more types
Zoning Districts
13
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Other Cities in Texas
Frequently Asked Questions
Sign height limits in Tyler vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.
To get a sign permit in Tyler, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Tyler, regulated sign types include Flag, Wall Sign, Window Sign, Wall Sign / Façade Sign (Single-Family and Two-Family Districts), and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
Sign setback requirements in Tyler vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.
Digital and LED signs in Tyler are regulated with specific requirements for brightness, animation, and message duration. Tyler has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.
Ready to Research Tyler Sign Permits?
Stop spending hours searching through municipal codes. Get instant access to Tyler, Texas sign regulations with PermitPal's AI-powered platform.
No credit card required · Get results in seconds
Tyler, Texas Sign Rules at a Glance
Tyler, Texas regulates 24 sign types across 13 zoning districts. Freestanding Sign (Single-Family and Two-Family Districts)s in the Residential Districts, Single-Family and Two-Family Districts zoning district are capped at 6 ft tall and 1 sq. ft., with a 5 ft setback (Sec. Sec. 10-408). Most commercial signs in Tyler require a permit.
Detailed Sign Ordinance Requirements for Tyler, Texas
Sign Rules by Zoning District in Tyler (13 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 3 | 35 ft (flagpole) | 25% of window area per elevation | — |
| Residential Districts, Single-Family and Two-Family Districts | 3 | 8 ft | 100 sq. ft. | — |
| R-MF, PMF | 1 | 10 ft | 32 sq. ft. | — |
| Multi-family Developments | 1 | 6 ft | 8 sq. ft. | — |
| All Residential Districts | 3 | 35 ft | 32 sq. ft. | — |
| Nonresidential Districts, All Nonresidential Districts | 2 | 35 ft | 24 sq. ft. | — |
| AG, AR | 1 | 8 ft | 8 sq. ft. | — |
| RPO | 2 | 25 ft | 32 sq. ft. | — |
| PCD, PMXD-1, PMXD-2 | 2 | 35 ft | 200 sq. ft. | — |
| C-1, C-2, DBAC, PCD, PMXD-1, PMXD-2, INT, OSP, M-1, M-2 | 4 | 35 ft | 100 sq. ft. | — |
| DBAC | 2 | 6 ft | 80% of side or rear wall area (of qualifying property) | — |
| M-1, M-2, ETJ | 1 | 35 ft | 672 sq. ft. | — |
| Properties developed with Public/Civic uses in INT | 1 | 8 ft | 24 sq. ft. | — |
Zone-by-Zone Sign Requirements in Tyler(sample of 3 of 13 zones)
Residential Districts, Single-Family and Two-Family Districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign / Façade Sign (Single-Family and Two-Family Districts) | — | 1 sq. ft. | — | — | 1 | On wall or façade | — | Unlock | Sec. 10-408 |
| Freestanding Sign (Single-Family and Two-Family Districts) | 6 ft | 1 sq. ft. | — | 5 ft | 1 | At least 5 ft setback | — | Unlock | Sec. 10-408 |
| Development Entry Sign (All Residential Districts) | 8 ft | 100 sq. ft. | — | 5 ft | 2 | Entry to residential development, setback minimum 5 ft | — | Unlock | Sec. 10-408 |
All Residential Districts
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Freestanding Sign (Properties with Public/Civic Uses) (Residential Districts) | 8 ft | 32 sq. ft. | — | 5 ft | 1 per frontage | Setback 5 ft, per street frontage | — | Unlock | Sec. 10-408 |
| Electronic Message Center (EMC) (Institutional/Public/Civic Uses in Residential Districts) | 8 ft | 24 sq. ft. | — | 5 ft | 1 | Setback 5 ft | — | Unlock | Sec. 10-408; Sec. 10-415 |
| Flag | 35 ft | 24 sq. ft. | — | — | 3 | On private property | — | Unlock | Sec. 10-408; Sec. 10-411 |
C-1, C-2, DBAC, PCD, PMXD-1, PMXD-2, INT, OSP, M-1, M-2
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign / Façade Sign (100-1999 sq. ft. façade) | — | 100 sq. ft. | — | — | 1 per façade | On façade, 1.5 ft max projection. Lower two floors, min. clearance 8 ft above ground | — | Unlock | Sec. 10-409 |
| Wall Sign / Façade Sign (2000+ sq. ft. façade) | — | 9% of façade area | — | — | 1 per façade | On façade, 1.5 ft max projection. Lower two floors, min. clearance 8 ft above ground | — | Unlock | Sec. 10-409 |
| Freestanding Sign | 35 ft | 100 sq. ft. | — | 2 ft for <10 ft high, 5 ft for 10-35 ft high | 1 per frontage | Setback 2 or 5 ft. | — | Unlock | Sec. 10-409 |
| Electronic Message Center (EMC) | 8 ft (freestanding EMC); if part of multi-part sign, max sign height applies. | C-1: 32 sq. ft. (plus additional allowance for speed); C-2/DBAC/PCD/PMXD/M-1/M-2: 64 sq. ft. | — | 5 ft | 1 per lot (or marquee face/lot as specified) | 5 ft setback. | — | Unlock | Sec. 10-409; Sec. 10-415 |
PermitPal covers all 13 zoning districts in Tyler — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.
See all 13 zones for Tyler — start freeProhibited Signs in Tyler
- No sign may be erected, constructed, altered, moved, extended or enlarged without first obtaining a sign building permit except as exempted.
- No person may erect or assist in the erection, construction or alteration of any sign for which a sign permit has not been issued as required.
- No sign base or support structure of any sign type is allowed in the public right-of-way in any zoning district.
- Permanent signs and other forms of outdoor advertising may not be located in or permitted to project into the public right-of-way, except as provided.
- Each sign base or support must be erected on private property and not public right-of-way.
- All signs not expressly permitted under the code or exempt from regulation are prohibited.
- Prohibited sign types include: beacons; portable signs; inflatable signs and balloons (in multi-family or non-residential districts); flashing, fluttering, undulating, swinging, rotating, or otherwise moving signs; signs affixed to a tree or utility pole; signs violating 'sight triangle' provisions; off-premise advertising signs except as permitted; three-dimensional or statuary signs; streamers; snipe signs.
- Illumination of any type may not be animated, chasing, or flashing.
- Signs must be maintained in good structural condition, in compliance with all building and electrical codes, and in conformance with this code, at all times.
- All signs must maintain a minimum clearance from electric power lines of ten feet horizontally and 15 feet vertically, or as may otherwise be required by the utility provider.
- Signs may not be located so as to cause a threat to the public health, safety, or welfare.
- Billboards must not be located so as to create a safety hazard, obscure or interfere with an official traffic sign, signal or device, or obstruct a driver's view.
- Billboard faces may not contain flashing, fluttering, undulating, swinging, rotating, or other moving elements or reflective material such as foil intended to distract drivers.
- Portable signs, advertising flags (except as allowed), pennants, and other attraction gathering devices are prohibited in all zoning districts except by temporary use permit.
- In public parks or recreation areas, it is unlawful for any person to post any sign, notice, or handbill except as provided.
- Signs, temporary or otherwise, affixed to a tree or utility pole are prohibited.
Exempt Signs in Tyler
- Any public notice, or warning required by a valid and applicable federal, state, or local law, regulation, or ordinance.
- Any sign inside a building, not attached to a window or door, that is not legible from a distance of more than three feet beyond the lot line.
- Works of art that do not include a commercial message.
- Holiday lights and decorations with no commercial message, except in multi-family and non-residential districts.
- Decorative landscape lighting only.
- Traffic control signs on private property, such as Stop, Yield, and similar signs that meet U.S. DOT or TXDOT standards.
- Address and postbox numerals conforming to incidental sign regulations.
- Government signs erected by the city, county, state, or federal government in furtherance of their governmental responsibility.
- Legal notices.
- Memorial signs or tablets and building markers displayed on public or private buildings and tablets or headstones in cemeteries.
- Signs prepared by or for the local, state, or federal government marking sites or buildings of historical significance.
Sign Plan & Submission Notes for Tyler
- A master signage plan is required for all multiple-tenant buildings, planned district developments, and all multi-building or multi-occupant commercial developments.
- The subject sign must be consistent with an approved master sign plan, where required, as part of permit review.
- Multi-tenant signs may utilize a roof sign only in accordance with an approved Master Signage Plan.
- Lots with two or more frontages may calculate sign allocation to be identified by the master signage plan.
- Site development plans may define individual pad or lease sites as separate lots for determining allowable signage within a master signage plan.
- Any sign requiring a permit and that is part of a development with an approved master sign plan must demonstrate at the time of permit application that it conforms to the master sign plan.
- Master sign plan applications require a formal application, a $80 filing fee, two paper copies and one digital copy of site plan consistent with the site development plan checklist.