Questions? Call us at (262) 218-2915

Sign Regulations in Valley View, Texas

Valley View, Texas has specific sign regulations covering 6 sign types across 6 zoning districts. Regulated sign types include Real Estate Sign, General Sign, Billboard. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 9, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Valley View, Texas

Sample Sign Requirements in Valley View

Sign TypeMax HeightMax AreaSetback
Real Estate SignNot listed4 square feetMinimum 5 feet from property line
General SignNot listed4 square feetNot listed
Billboard35 feet300 square feet per side, two sides maximumMinimum 25 feet from property line

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Valley ViewFull Coverage

Sign Types Covered

6

  • Real Estate Sign
  • General Sign
  • Billboard
  • Freestanding Sign
  • +2 more types

Zoning Districts

6

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Frequently Asked Questions

In Valley View, the height limit for Freestanding Sign is 35 feet in A, C-1, C-2, M-1, M-2; 16 feet in other districts (Sec. 4.03.017). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Valley View require a permit. From the submission notes on this page: Applications for billboards shall have engineered drawings submitted, and be designed for a 70 mph wind load minimum. Run a code check for an exact address to see the permit requirements for that zone.

Valley View's sign code covers 6 sign types, including Real Estate Sign, General Sign, Billboard, and Freestanding Sign. Most commercial signs need a permit. The ordinance lists 7 exemptions. One of them: Signs erected by a governmental body or public utility. The full list is on this page.

In Valley View, Freestanding Sign must be set back 10 feet (Sec. 4.03.017). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Valley View's sign ordinance that cover digital, changing, or flashing signs: Signs that move due to flashing lights or other similar display methods, except with the approval of the planning and zoning commission. Exception: Signs that display the time and temperature or weather conditions. Signs that move due to flashing lights or other similar display methods require approval from the planning and zoning commission. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Valley View Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Valley View, Texas, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Valley View, Texas Sign Rules at a Glance

Valley View, Texas regulates 6 sign types across 6 zoning districts. Real Estate Signs in the Residential Zoning are capped at 4 square feet, set back at least 5 feet from property line (Sec. 4.03.007(4)). Most commercial signs in Valley View require a permit.

Detailed Sign Ordinance Requirements for Valley View, Texas

Sign Rules by Zoning District in Valley View (6 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential Zoning2Not listed4 square feetNot listed
C-1 District1Not listed16 square feetNot listed
C-2 District1Not listed32 square feetNot listed
Manufacturing District1Not listed32 square feetNot listed
A District, M-1 District, M-2 District135 feet300 square feet per side, two sides maximumNot listed
General Regulations For All Zones335 feet in A, C-1, C-2, M-1, M-2; 16 feet in other districts5'x12' for bannersNot listed

Zone-by-Zone Sign Requirements in Valley View(sample of 3 of 6 zones)

Residential Zoning

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Real Estate SignNot listed4 square feetNot listedMinimum 5 feet from property lineNot listedMinimum 5 feet setback from property line, not in sight triangleNot listedUnlock§ 4.03.007(4)
General SignNot listed4 square feetNot listedNot listedNot listedNot listedNot listedUnlock§ 4.03.007(1)

A District, M-1 District, M-2 District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Billboard35 feet300 square feet per side, two sides maximumNot listedMinimum 25 feet from property lineNot listedAlong Interstate Highway 35 and FM 922Not listedUnlock§ 4.03.011

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign35 feet in A, C-1, C-2, M-1, M-2; 16 feet in other districtsNot listedNot listed10 feetOne per business or lot unless frontage on more than one street10 feet setbackNot listedUnlock§ 4.03.017
Wall SignCannot extend more than 5 feet above parapet or roofNot listedNot listedNot listedNot listedAttached to buildingNot listedUnlock§ 4.03.013
Temporary SignNot listed5'x12' for bannersNot listedNot listedNo more than two banners per locationMinimum 8 feet above sidewalks and drivewaysNot listedUnlock§ 4.03.008

PermitPal covers all 6 zoning districts in Valley View. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Valley View

  • Portable or moveable signs, except two counterbalanced type signs at gas stations, convenience stores and similar type occupancies.
  • Balloons over one foot diameter, blimps, propellers and other types of signs that move due to the action of the wind.
  • Searchlights, except on the day of grand opening.
  • Signs that move due to flashing lights or other similar display methods, except with the approval of the planning and zoning commission. Exception: Signs that display the time and temperature or weather conditions.
  • Outside perimeter or neon lighting, except with the permission of the planning and zoning commission.
  • Any sign that blocks the view of motorists or is in the established sight triangle at intersections.
  • Any sign that shines light into houses in a residential area.
  • Any sign on public property or in the public right-of-way.
  • Signs on utility poles, or within ten feet of any overhead electrical power transmission line, or on traffic sign poles.
  • Signs painted directly on buildings (not windows).
  • Signs attached to living vegetation.
  • Home occupation signs in a residentially zoned area.
  • Off-premises signs except as otherwise noted in this article.

Exempt Signs in Valley View

  • Signs not exceeding four square feet normally associated with residential use, such as addresses, mailbox signs and warning or traffic signs posted on private property.
  • Signs erected by a governmental body or public utility.
  • Signs on currently licensed vehicles that are not primarily used as signs.
  • Signs for real estate brokers indicating the property is for sale, with size limitations based on zoning.
  • Signs erected in connection with political campaigns, with size limitations and removal requirements.
  • Signs regulated by state agencies that supersede local requirements.
  • Signs or other displays used in conjunction with holidays, festivals or grand openings, with placement and removal time restrictions.

Sign Plan & Submission Notes for Valley View

  • Applications for billboards shall have engineered drawings submitted, and be designed for a 70 mph wind load minimum.
  • Banners in excess of 5'x12', shall require a special permit from the planning and zoning commission.
  • Signs that move due to flashing lights or other similar display methods require approval from the planning and zoning commission.
  • Outside perimeter or neon lighting requires permission from the planning and zoning commission.
  • Any odd, different, unusual or spectacular signs not specifically covered by this article shall be referred to the planning and zoning commission on a case-by-case basis for special approval.