Sign Regulations in Fillmore, Utah
Fillmore, Utah has specific sign regulations covering 20 sign types across 8 zoning districts. Regulated sign types include Banner sign, Campaign sign, Construction sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: April 19, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Fillmore, Utah
Sample Sign Requirements in Fillmore
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Address/Occupant Sign | Not listed | 1 sq. ft. | Not listed |
| Commemorative/Historical Plaque or Religious Emblem | Not listed | 3 sq. ft. | Not listed |
| A-frame sign | Not listed | Not listed | 10' from intersection |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
20
- Banner sign
- Campaign sign
- Construction sign
- Flat or wall sign
- +2 more types
Zoning Districts
8
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Other Cities in Utah
Frequently Asked Questions
In Fillmore, the height limit for Pole sign in the Section 10-8B-9 Zone is 60', 90' if within 1,320' of I-15 corridor. The height limit for Flat or wall sign in the Section 10-6-9 Zone is 7'. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Fillmore require a permit. From the submission notes on this page: Except as provided, it is unlawful to display, erect, relocate or alter any sign without first submitting a sign permit application with required plans and obtaining a recommendation for a sign permit from the Planning Commission. Run a code check for an exact address to see the permit requirements for that zone.
Fillmore's sign code covers 20 sign types, including Banner sign, Campaign sign, Construction sign, and Flat or wall sign. Most commercial signs need a permit. The ordinance lists 13 exemptions. One of them: The changing of the advertising copy or message of signs specifically designed for the use of replaceable copy does not require a sign permit. The full list is on this page.
In Fillmore, A-frame sign in the Section 10-6-9 Zone must be set back 10' from intersection. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Fillmore's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research Fillmore Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Fillmore, Utah, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Fillmore, Utah Sign Rules at a Glance
Fillmore, Utah regulates 20 sign types across 8 zoning districts. Billboards in the Section 10-9A-9 Zone are capped at 25' tall and 500 sq ft. Most commercial signs in Fillmore require a permit.
Detailed Sign Ordinance Requirements for Fillmore, Utah
Sign Rules by Zoning District in Fillmore (8 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 6 | Not listed | 3 sq. ft. | Not listed |
| Section 10-6-9 Zone | 10 | 25' | 39 sq. ft. | Not listed |
| Section 10-7A-9 Zone | 7 | 7' | 39 sq. ft. | Not listed |
| Section 10-7C-8 Zone | 7 | 7' | 39 sq. ft. | Not listed |
| Section 10-8B-9 Zone | 12 | 60', 90' if within 1,320' of I-15 corridor | 500 sq. ft. 250 sq. ft. in certain areas | Not listed |
| Section 10-9A-9 Zone | 11 | 40' | 500 sq. ft. | Not listed |
| Section 10-10-8 Zone | 9 | 7' | 39 sq. ft. | Not listed |
| Section 10-11-8 Zone | 9 | 20' | 39 sq. ft. | Not listed |
Zone-by-Zone Sign Requirements in Fillmore(sample of 3 of 8 zones)
Section 10-6-9 Zone
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| A-frame sign | Not listed | Not listed | Not listed | 10' from intersection | Not listed | Not within 10' of intersection | Not listed | Unlock | TABLE 10-6-9 |
| Banner sign | 3', installation max 25' | 3' x 6' (18 sq. ft.) | 6' | Not listed | Not listed | Not listed | Not listed | Unlock | TABLE 10-6-9 |
| Billboard | 25' | Not listed | Not listed | Not listed | Not listed | Off-premises permitted in I-15 corridor for 1,000'. See Zone Map. | Not listed | Unlock | TABLE 10-6-9 |
| Construction sign | 4' | 4' x 8' (32 sq. ft.) | 8' | Not listed | Not listed | Not listed | Not listed | Unlock | TABLE 10-6-9 |
| Flat or wall sign | 7' | 39 sq. ft. | Not listed | Not listed | 1 per building | On wall | Not listed | Unlock | TABLE 10-6-9 |
| Monument sign | 6', installation max 25' | 39 sq. ft. | Not listed | Not listed | 1 per 500' of frontage | Ground/monument | Not listed | Unlock | TABLE 10-6-9 |
| Nameplate | 2' | 2' x 3' (6 sq. ft.) | 3' | Not listed | Not listed | Not listed | Not listed | Unlock | TABLE 10-6-9 |
| Real estate sign | 3' | 3' x 6' (18 sq. ft.) | 6' | Not listed | Not listed | Not listed | Not listed | Unlock | TABLE 10-6-9 |
Section 10-8B-9 Zone
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| A-frame sign | 6' | Not listed | Not listed | 10' from intersection | Not listed | Not within 10' of intersection | Not listed | Unlock | TABLE 10-8B-9 |
| Banner sign | 3', installation max 25' | 3' x 6' (18 sq. ft.) | 6' | Not listed | Not listed | Not listed | Not listed | Unlock | TABLE 10-8B-9 |
| Billboard | 25' | 500 sq. ft. 250 sq. ft. in certain areas | Not listed | Not listed | Not listed | Off-premises in allowed areas (see zone map). | Not listed | Unlock | TABLE 10-8B-9 |
| Construction sign | 4' | 4' x 8' (32 sq. ft.) | 8' | Not listed | Not listed | Not listed | Not listed | Unlock | TABLE 10-8B-9 |
| Monument sign | 6', installation max 25' | 39 sq. ft. | Not listed | Not listed | 1 per 500' of frontage | Ground/monument | Not listed | Unlock | TABLE 10-8B-9 |
| Nameplate | 2' | 2' x 3' (6 sq. ft.) | 3' | Not listed | Not listed | Not listed | Not listed | Unlock | TABLE 10-8B-9 |
| Pole sign | 60', 90' if within 1,320' of I-15 corridor | Not listed | Not listed | Not listed | Not listed | On premises | Not listed | Unlock | TABLE 10-8B-9 |
| Real estate sign | 3' | 3' x 6' (18 sq. ft.) | 6' | Not listed | Not listed | Not listed | Not listed | Unlock | TABLE 10-8B-9 |
Section 10-9A-9 Zone
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| A-frame sign | 6' | Not listed | Not listed | 10' from intersection | Not listed | Not within 10' of intersection | Not listed | Unlock | TABLE 10-9A-9 |
| Banner sign | 3', installation max 25' | 3' x 6' (18 sq. ft.) | 6' | Not listed | Not listed | Not listed | Not listed | Unlock | TABLE 10-9A-9 |
| Billboard | 25' | 500 sq. ft. | Not listed | Not listed | Not listed | Off-premises in allowed areas (see zone map). | Not listed | Unlock | TABLE 10-9A-9 |
| Construction sign | 4' | 4' x 8' (32 sq. ft.) | 8' | Not listed | Not listed | Not listed | Not listed | Unlock | TABLE 10-9A-9 |
| Monument/ freestanding sign | 6', installation max 25' | 39 sq. ft. | Not listed | Not listed | 1 per 500' of frontage | Ground/monument | Not listed | Unlock | TABLE 10-9A-9 |
| Nameplate | 2' | 2' x 3' (6 sq. ft.) | 3' | Not listed | Not listed | Not listed | Not listed | Unlock | TABLE 10-9A-9 |
| Pole sign | 40' | Not listed | Not listed | Not listed | Not listed | On premises | Not listed | Unlock | TABLE 10-9A-9 |
| Real estate sign | 3' | 3' x 6' (18 sq. ft.) | 6' | Not listed | Not listed | Not listed | Not listed | Unlock | TABLE 10-9A-9 |
PermitPal covers all 8 zoning districts in Fillmore. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Fillmore
- If a sign type is not specifically designated in the ordinance, it is prohibited.
- Continuous illumination of signs is prohibited, except for billboards on the I-15 corridor in designated zones.
- It is unlawful to display, erect, relocate or alter any sign without first obtaining a sign permit, except as specifically exempted.
- Signs or other advertising structures shall not be erected at the intersection of any streets or driveways in such manner as to obstruct free and clear vision.
- No sign shall be located on publicly owned land or inside street rights-of-way, except signs required and erected by permission of an authorized public agency.
- No projecting sign attached to a building shall project over public property more than four feet and in no case be closer than four feet to curb line or edge of street.
- Ground signs must be set back at least eighteen inches from any public right-of-way.
- It is unlawful for any person to write, make or place any sign or advertisement on any street or sidewalk without permission from the City Council.
- It is unlawful to place any approved display or sign on City property, including A-frame type signs, within ten feet of an intersection.
- No display or sign on City property shall obstruct the flow of pedestrian traffic; a minimum of five feet (Main Street) or four feet (other sidewalks) of unobstructed sidewalk must be provided.
- A nonconforming sign shall not be reconstructed, raised, moved, placed, extended or enlarged unless changed to conform to all provisions.
- Prohibited signs are Class C misdemeanors and subject to penalty.
- A person may not tear down, mutilate or destroy any sign, signboards or other notice which regulates trespassing for purposes of operating an off highway vehicle on land.
Exempt Signs in Fillmore
- Signs of a governmental nature for the control of traffic and other regulatory purposes, such as street signs, danger signs, railroad crossing signs and signs of public service companies indicating danger and aids to service or safety.
- Signs associated with public and quasi-public organization functions which are clearly of a temporary nature.
- Interior signs.
- Flags, emblems or insignias of any nation or political subdivision.
- Signs not exceeding one square foot in area and bearing only property numbers, post box numbers or names of occupants of premises.
- Legal notices, identification information or directional signs erected by governmental bodies.
- Commemorative plaques of recognized historical agencies, or identification emblems or symbols of religious orders, provided no such plaque, symbol or identification emblem exceeds three square feet in area and is placed flat against a building.
- Existing signage previously approved does not have to comply with current sign regulations regarding the initial installation; all other requirements remain in force.
- The changing of the advertising copy or message of signs specifically designed for the use of replaceable copy does not require a sign permit.
- Electrical maintenance, repainting or cleaning maintenance of a sign does not require a sign permit.
- The repair of a sign does not require a sign permit.
- Real estate signs no larger than six square feet do not require a sign permit.
- Nameplate signs do not require a sign permit.
Sign Plan & Submission Notes for Fillmore
- Except as provided, it is unlawful to display, erect, relocate or alter any sign without first submitting a sign permit application with required plans and obtaining a recommendation for a sign permit from the Planning Commission.
- A sign permit application must include: owner/contact information, location, site plan and elevation drawings, structural details (for freestanding signs), any required electrical permit, and a statement of sign value.
- Permitted changes (advertising copy change, maintenance, repairs, certain real estate/nameplate signs) do not require a new sign permit.
- A site plan, elevation drawings, and structural details (for certain sign types) are needed for permit review.
- Review and approval by staff may be necessary for installation height or specifications for some sign types for safety and visibility.