Questions? Call us at (262) 218-2915

Sign Regulations in Roanoke, Virginia

Roanoke, Virginia has specific sign regulations covering 11 sign types across 16 zoning districts. Regulated sign types include Freestanding Sign, Building-mounted Sign, Any sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Roanoke, Virginia

Sample Sign Requirements in Roanoke

Sign TypeMax HeightMax AreaSetback
Building-mounted Sign (for nonconforming, nonresidential uses)Not listed6 sq ftNot listed
Freestanding Sign6 ft25 sq ft per structureNot listed
Building-mounted SignNot listed25 sq ft per signNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for RoanokeFull Coverage

Sign Types Covered

11

  • Freestanding Sign
  • Building-mounted Sign
  • Any sign
  • Upper-story Wall Sign
  • +2 more types

Zoning Districts

16

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Roanoke

City WebsiteMunicipal Code5 permit application links available

Frequently Asked Questions

In Roanoke, the height limit for Freestanding Sign in the CG Commercial-General District is 25 ft. Maximum sign heights range from 6 ft to 25 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Roanoke require a permit. From the submission notes on this page: Any application for a zoning permit for a sign in the H-1 or H-2 districts must be accompanied by a Certificate of Appropriateness from the Architectural Review Board. Run a code check for an exact address to see the permit requirements for that zone.

Roanoke's sign code covers 11 sign types, including Freestanding Sign, Building-mounted Sign, Any sign, and Upper-story Wall Sign. Most commercial signs need a permit. The ordinance lists 20 exemptions. One of them: The following sign types are exempt from sign regulations and permit requirements, provided they are not within the public right-of-way or sight distance triangle (unless otherwise noted): decorative home flags or national, state, or other governmental flags and insignias. The full list is on this page.

This page doesn't list a single setback distance for signs in Roanoke. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Roanoke's sign ordinance that cover digital, changing, or flashing signs: Animated signs including feather signs are prohibited in all zoning districts. Flashing signs are prohibited in all zoning districts, except that theatre marquees are exempt from this prohibition. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Roanoke Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Roanoke, Virginia, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Roanoke, Virginia Sign Rules at a Glance

Roanoke, Virginia regulates 11 sign types across 16 zoning districts. Freestanding Signs in the CLS Commercial-Large Site District are capped at 25 ft tall and 150 sq ft per sign. Most commercial signs in Roanoke require a permit.

Detailed Sign Ordinance Requirements for Roanoke, Virginia

Sign Rules by Zoning District in Roanoke (16 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
RA Agricultural District, R-12 Residential District, R-7 Residential District, R-5 Residential District, R-3 Residential District, RM-1 Residential District2Not listed6 sq ftNot listed
RM-2 Residential District, RMF Residential District26 ft25 sq ft per structureNot listed
MX Mixed Use District, CN Commercial-Neighborhood District, IN Institutional District, ROS Recreation and Open Space District, UF Urban Flex District26 ft32 sq ft per structureNot listed
CG Commercial-General District325 ft300 sq ftNot listed
CLS Commercial-Large Site District325 ft300 sq ftNot listed
D Downtown District, UC Urban Center District36 ft300 sq ftNot listed
Light Industrial District (I-1), Heavy Industrial District (I-2), Airport Development District (AD)216 ft125 sq ft per structureNot listed
Mixed Use Planned Unit Development District (MXPUD), Institutional Planned Unit Development District (INPUD), Industrial Planned Unit Development District (IPUD)1Not listedNot listedNot listed
Comprehensive Sign Overlay District1Not listedNot listedNot listed
Historic Downtown Overlay District (H-1)1Not listedNot listedNot listed
Historic Neighborhood Overlay District (H-2)1Not listedNot listedNot listed
Neighborhood Design Overlay District (ND)1Not listedNot listedNot listed
Floodplain Overlay District (F)1Not listedNot listedNot listed
Airport Navigation Overlay District (AN)1Not listedNot listedNot listed
River and Creek Corridors Overlay District (RCC)1Not listedNot listedNot listed
General Regulations For All Zones225 ft300 sq ft max in CG, D (+10% embellishments); 672 sq ft in I-1, I-2 (+10%)Not listed

Zone-by-Zone Sign Requirements in Roanoke(sample of 3 of 16 zones)

CG Commercial-General District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign25 ft100 sq ft per structureNot listedNot listed1 per frontagePer frontageNot listedUnlockSec. 36.2-668, Table 668-1
Building-mounted SignNot listedNot listedNot listedNot listedNo maximumOn buildingNot listedUnlockSec. 36.2-668, Table 668-1; Sec. 36.2-677
Upper-story Wall SignNot listed300 sq ftNot listedNot listedNo maximum specifiedAbove 25 ft on building façadeNot listedUnlockSec. 36.2-668, Table 668-1; Sec. 36.2-672

CLS Commercial-Large Site District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign25 ft150 sq ft per signNot listedNot listedMax 4 per lot1 for first 200 lf frontage; plus 1 additional for each 200 lf, up to 4 signsNot listedUnlockSec. 36.2-668, Table 668-1
Building-mounted SignNot listedNot listedNot listedNot listedNo maximumOn buildingNot listedUnlockSec. 36.2-668, Table 668-1
Upper-story Wall SignNot listed300 sq ftNot listedNot listedNo maximumAbove 25 ftNot listedUnlockSec. 36.2-668, Table 668-1; Sec. 36.2-672

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Portable Sign (Sandwich Board/A-Frame), Window Sign, Temporary Sign, Changeable Copy and Electronic Readerboard, Public Service Message BoardVaries by type (see description)Sandwich Board: 4 ft high x 2.5 ft wide; Window: up to 50% of window area; Temp.: 32 sq ft, 6 ft high; Readerboard: max 25 sq ft (except outdoor advertising); Public Service: 450 sq ft max (see below)Sandwich Board: 2.5 ft; Window: 50% of window widthSee type; most signs required to be outside sight distance triangle, not in ROWVaries by type and districtSee respective section for placementNot listedUnlockSec. 36.2-661(c), 663, 666, 669, 670, 671, 672, 673, 674; Table 668-1
Outdoor Advertising Sign (Billboard)25 ft300 sq ft max in CG, D (+10% embellishments); 672 sq ft in I-1, I-2 (+10%)Not listedYard as per underlying district; see codeControlled by spacing rulesSubject to district & spacingNot listedUnlockSec. 36.2-675

PermitPal covers all 16 zoning districts in Roanoke. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Roanoke

  • Animated signs including feather signs are prohibited in all zoning districts.
  • Flashing signs are prohibited in all zoning districts, except that theatre marquees are exempt from this prohibition.
  • Inflatable signs are prohibited in all zoning districts, except as allowed as a temporary sign.
  • Laser light or image projection signs are prohibited in all zoning districts, except as a temporary sign.
  • Off-site directional signs are prohibited, except for specific off-site directional real estate signs.
  • Pennants or streamers are prohibited.
  • Portable signs are prohibited, except for sandwich board signs as expressly permitted.
  • Projecting signs with their lowest portions above 25 feet above adjacent ground level are prohibited.
  • Roof signs are prohibited, except for certain historic signs allowed in the H-1 District.
  • Searchlight or beacon signs are prohibited, except as a temporary sign.
  • Snipe signs are prohibited.
  • Any sign located within or over a public right-of-way, or public property, except for government signs or authorized encroachments, is prohibited.
  • Any sign that contains beacons of light resembling or simulating any emergency service vehicle or equipment is prohibited.
  • Any sign using traffic symbols or colors of red, amber, and green in such combination of shape or color as to be confused with traffic control devices is prohibited.
  • Any sign attached partially or wholly to the pitched or flat roof of a building, or any sign projecting horizontally or vertically beyond any part of the building to which it is attached, is prohibited.
  • Any sign that produces sound, odor, or visible matter such as smoke or vapor is prohibited.
  • It is unlawful to erect, install, structurally alter, modify, relocate, or replace any sign or sign structure, except those specifically exempted, without obtaining a zoning permit.
  • No sign (unless otherwise specifically provided) shall be placed within the public right-of-way or within any sight distance triangle.
  • Signs shall not be displayed in excess of permitted number, size, height, or area by zoning district and sign type.
  • General outdoor storage of goods, items, materials, or merchandise is not permitted unless specifically allowed as an accessory use.
  • No sign shall shine directly into abutting residential dwelling units, adjacent lots, or streets so that the source of illumination is visible at the property line.
  • No part of any awning or canopy containing a sign shall extend above the height of the bottom sill of any second story window of the building façade to which it is attached.
  • Window signs exceeding 50% of the window area are prohibited.
  • Maximum allowed temporary sign duration, height, and area limits apply.
  • Permanent signs must not be constructed, altered, used, occupied, or located except in conformity with the ordinance.

Exempt Signs in Roanoke

  • The following sign types are exempt from sign regulations and permit requirements, provided they are not within the public right-of-way or sight distance triangle (unless otherwise noted): decorative home flags or national, state, or other governmental flags and insignias.
  • Legal notices, identification, informational, or directional signs erected by a government body or required by law.
  • Decorative banners attached to light poles, secured at top and bottom, and bearing no advertising or commercial images.
  • Directional signs not exceeding 4 square feet in area and 4 feet in height for freestanding directional signs.
  • Signs displaying only the word 'open' or 'closed,' or hours of operation, not exceeding one per lot and 4 square feet in area.
  • Commemorative plaques, historical markers, and signs with historical value or significance, erected by a government body and not exceeding 15 square feet.
  • Nameplates not exceeding 2 square feet in area.
  • Neighborhood identification signs displaying only the neighborhood name, not exceeding 15 square feet.
  • Address signs not exceeding 4 square feet in area.
  • Murals.
  • Temporary signs not exceeding 12 square feet in cumulative sign area in a residential district.
  • Temporary real estate signs advertising for sale/rent/lease of on-site property, limited in area and frequency by zoning district.
  • Temporary off-site directional real estate signs not exceeding 12 square feet and with written owner permission.
  • Memorial plaques.
  • Temporary safety signs on temporary structures, fences, and barricades for construction safety.
  • Construction signs on property where construction is underway/proposed, limited to one per frontage and size by zoning district.
  • Signs associated with outdoor recreational facilities, amphitheaters, or stadiums, where not legible from the public right-of-way.
  • A single sandwich board or 'A' frame sign per storefront in multiple purpose districts.
  • Window covers placed inside vacant storefront windows to shield the interior from view.
  • Outdoor lighting exemptions: Illuminated signs (subject to section 36.2-666); landscape lighting 2 feet or less in height; accent directional lighting; security lighting controlled by motion sensors with no more than 15 minutes duration; outdoor recreation facility or sports stadium lighting; temporary/holiday/emergency lighting; lighting of US/VA flags and noncommercial flags; submerged pool lighting; code-required lighting for egress; and FAA-required lighting.

Sign Plan & Submission Notes for Roanoke

  • In the Comprehensive Sign Overlay District, approval of a comprehensive signage plan is required. The Overlay District may be established by zoning map amendment, and all applications must include a written comprehensive signage plan detailing the type, quantity, size, shape, color, material, and location of all existing and proposed signs within the property. The plan must include illustrations and comply with compatibility standards.
  • In the H-1 and H-2 Historic Overlay Districts, a Certificate of Appropriateness is required for new signs or modification of signs as part of design review.
  • Any application for a zoning permit for a sign in the H-1 or H-2 districts must be accompanied by a Certificate of Appropriateness from the Architectural Review Board.
  • A basic development plan or comprehensive development plan must include delineation and compliance of signage with zoning regulations as appropriate to site development.
  • All zoning permit applications for outdoor advertising signs must be accompanied by a basic development plan and meet State requirements before a permit is issued.
  • Within Planned Unit Development (PUD) districts, signage regulations not specified on the PUD development plan default to the CG district standards. Therefore, a master sign plan may be required if sign standards are to differ from the CG baseline.
  • Signage plan approval is required for the establishment of a Comprehensive Sign Overlay District and such a district is allowed only after detailed review by the Planning Commission and City Council per procedural requirements.
  • If requesting to allocate unused freestanding sign area to building-mounted signs, a written request must be submitted as part of the sign plan and approved by the Zoning Administrator.
  • Any sign to be placed on, or project over, a public right-of-way requires compliance with additional municipal code provisions regarding encroachments, insurance, and hold-harmless agreements.
  • All applications for wireless telecommunications towers, broadcasting towers, or other wireless facilities requiring a special exception, must include facility design, alternative site analysis, and development plan showing the location and details of signage, where applicable.

Source: municode municipal code