Sign Regulations in Kalama, Washington
Kalama, Washington has specific sign regulations covering 32 sign types across 6 zoning districts. Regulated sign types include Projecting Sign, Portable Sign (A-frame/Sandwich Board), Temporary/Special Event Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 5, 2025
Sign Regulation Overview for Kalama, Washington
Sample Sign Requirements in Kalama
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Temporary/Special Event Sign | — | — | Subject to same setback and clearance as other signs; vision clearance setback of at least 10 ft from edge of roadway (see 17.38.100.E.2). |
| Incidental Sign | — | 10 square feet aggregate (for all such signs on a site) | — |
| Wall Sign | — | One wall sign per 1 linear foot of primary building frontage; max 40 sq ft if less than 40 ft frontage; total area on any wall must not exceed that wall's frontage-based calculation or 40 sq ft, whichever is greater. | — |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
32
- Projecting Sign
- Portable Sign (A-frame/Sandwich Board)
- Temporary/Special Event Sign
- Signs Extending Over Public Sidewalk/Walkway
- +2 more types
Zoning Districts
6
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Kalama
Other Cities in Washington
Frequently Asked Questions
Sign height limits in Kalama vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.
To get a sign permit in Kalama, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.
In Kalama, regulated sign types include Projecting Sign, Portable Sign (A-frame/Sandwich Board), Temporary/Special Event Sign, Signs Extending Over Public Sidewalk/Walkway, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.
Sign setback requirements in Kalama vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.
Digital and LED signs in Kalama are regulated with specific requirements for brightness, animation, and message duration. Kalama has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.
Ready to Research Kalama Sign Permits?
Stop spending hours searching through municipal codes. Get instant access to Kalama, Washington sign regulations with PermitPal's AI-powered platform.
No credit card required · Get results in seconds