Questions? Call us at (262) 218-2915

Sign Regulations in Longview, Washington

Longview, Washington has specific sign regulations covering 52 sign types across 16 zoning districts. Regulated sign types include On-Premises Signs, Temporary Real Estate Sign, Business Complex Freestanding Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: June 11, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Longview, Washington

Sample Sign Requirements in Longview

Sign TypeMax HeightMax AreaSetback
Home Occupation SignNot listed2 sq ftNot listed
Electronic Message Center Sign (EMC)Monument: 8 ft; Fascia: 10 ft; Pole: 16 ft30 sq ft10 ft from lot line, 70 ft from any residential building; pole signs not within 30 ft of pavement edge
School/Church Wall SignNot listedUnlimited in size, if attached to principal buildingNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for LongviewFull Coverage

Sign Types Covered

52

  • On-Premises Signs
  • Temporary Real Estate Sign
  • Business Complex Freestanding Sign
  • LI-B On-Premises Sign (Special)
  • +2 more types

Zoning Districts

16

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Longview

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

In Longview, the height limit for Freestanding Sign in the Downtown Commerce (D-C) zoning district is 18 ft. The height limit for Wall Sign in the Downtown Commerce (D-C) zoning district is 18 ft above grade. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Longview require a permit. From the submission notes on this page: Applications for Master/Sign plans, plot plans, or similar (such as for outdoor advertising structures/billboards) must be accompanied by a drawing to scale of the proposed sign and a plot plan showing proposed location and nearby features (16.40.060). Run a code check for an exact address to see the permit requirements for that zone.

Longview's sign code covers 52 sign types, including On-Premises Signs, Temporary Real Estate Sign, Business Complex Freestanding Sign, and LI-B On-Premises Sign (Special). Most commercial signs need a permit. The ordinance lists 16 exemptions. One of them: Billboards as provided in LMC Chapter 16.40. The full list is on this page.

In Longview, School/Church Freestanding Sign in the Residential District (R-1, R-2, R-3, R-4) and other zoning districts must be set back 10 ft from lot line. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Longview's sign ordinance that cover digital, changing, or flashing signs: No billboards or outdoor advertising structures shall be constructed outside the specified manufacturing districts; maximum size is 300 sq ft; no electronic, moving, or flashing faces on billboards. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Longview Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Longview, Washington, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Longview, Washington Sign Rules at a Glance

Longview, Washington regulates 52 sign types across 16 zoning districts. Directional Signs in the Downtown Commerce (D-C) zoning district are capped at 5 ft tall and 6 sq ft. Most commercial signs in Longview require a permit.

Detailed Sign Ordinance Requirements for Longview, Washington

Sign Rules by Zoning District in Longview (16 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential District (R-1, R-2, R-3, R-4), Traditional Neighborhood Residential (TNR)1142 in30 sq ftNot listed
Downtown Commerce (D-C)918 ft above grade75 sq ft per side, max 150 sq ft totalNot listed
Country Club District (C-D)4Not listed40 sq ftNot listed
County Event Center District (CEC)2Not listedNot listedNot listed
Civic Center District (C-C)1Not listedNot listedNot listed
Central Business District (CBD), Regional Commercial District (RC), General Commercial District (GC), Office/Commercial District (O/C)1Not listedNot listedNot listed
Neighborhood Commercial District (NC)416 ft100 sq ft total (no individual sign >75 sq ft); up to 2 per principal businessNot listed
Riverfront District (RF-1)516 ft above grade75 sq ft per sign, max 2 per buildingNot listed
Light Industrial District (LI-A, LI-B), Heavy Industrial District (HI), Commercial/Industrial District (C/I)325 ft300 sq ft per signNot listed
Manufacturing District (M-1-A, M-1, M-2)125 ft300 sq ft per signNot listed
Recreational Vehicle Parks2Not listedNot listedNot listed
Planned Unit Development642 in32 sq ft (temp), 10 ft highNot listed
General Regulations For All Zones536 in64 sq ft per street frontage (total); 32 sq ft per signNot listed
General Commercial District (GC), Regional Commercial District (RC), Central Business District (CBD), Office/Commercial District (O/C)1Not listedNot listedNot listed
Light Industrial District (LI-A, LI-B), Heavy Industrial District (HI), Commercial/Industrial District (C/I), Manufacturing District (M-1-A, M-1, M-2)325 ft300 sq ft per signNot listed
General Regulations For All Zones (continued)536 in64 sq ft per street frontage (total), max 32 sq ft per sign, 2 per frontageNot listed

Zone-by-Zone Sign Requirements in Longview(sample of 3 of 16 zones)

Residential District (R-1, R-2, R-3, R-4), Traditional Neighborhood Residential (TNR)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Home Occupation SignNot listed2 sq ftNot listedNot listed1 per home occupationAttached to dwellingNot listedUnlockLMC 19.22.030(1)(l)
Electronic Message Center Sign (EMC)Monument: 8 ft; Fascia: 10 ft; Pole: 16 ft30 sq ftNot listed10 ft from lot line, 70 ft from any residential building; pole signs not within 30 ft of pavement edge1 per useAs attached/freestanding per typeNot listedUnlockLMC 19.22.040(3)
School/Church Wall SignNot listedUnlimited in size, if attached to principal buildingNot listedNot listedUp to 2 attachedPrincipal buildingNot listedUnlockLMC 19.22.040(5)
School/Church Freestanding SignNot listed30 sq ft (school campus: 80 sq ft)Not listed10 ft from lot lineNot listedOn premisesNot listedUnlockLMC 19.22.040(5)
Duplex/Triplex/Fourplex/Townhouse Freestanding Entrance Sign6 ft10 sq ftNot listedNot listed1 per development/entranceDevelopment/entranceNot listedUnlockLMC 19.22.040(6)
Multifamily Freestanding Sign6 ft10 sq ftNot listedNot listed1 per developmentDevelopment siteNot listedUnlockLMC 19.22.040(7)
Multifamily Directional/Informational Sign42 in5 sq ftNot listedNot listed2 per projectOn premisesNot listedUnlockLMC 19.22.040(7)
Nonresidential Use Freestanding Sign (R-3, R-4 only)8 ft30 sq ft or 2 @ 20 sq ft (if corner site)Not listedNot listed1 or 2 (corner lots)On premises, not over ROWNot listedUnlockLMC 19.22.040(8)(b)

Downtown Commerce (D-C)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Permanent Signs (Aggregate)Not listedSee formulaNot listedNot listedNot listedBuilding frontage/occupancyNot listedUnlockLMC 19.46.060(1)
Wall Sign18 ft above gradeNot listedNot listedNot listedLimited by sign area aggregateAny elevationNot listedUnlockLMC 19.46.060(2)(j)
Projecting Sign18 ft32 sq ft per sign face (except bracket: 6 sq ft)Not listedNot listed1 per entranceProjecting over sidewalkNot listedUnlockLMC 19.46.060(2)(g)
Freestanding Sign18 ft75 sq ft per side, max 150 sq ft totalNot listedNot listed1 per business frontage (limits apply)On premises (not over ROW)Not listedUnlockLMC 19.46.060(2)(d)
Awning, Canopy, Marquee Sign18 ftSubject to aggregateNot listedNot listedNo stated limit (subject to aggregate area)On awning/canopy/marquee, must meet max heightNot listedUnlockLMC 19.46.060(2)(a)
Sandwich Board Sign6.5 ft (when set at angle), min 30 in6 sq ft30 inNot listed1 per street frontage per businessSidewalk in front of or within 15 ft of entranceNot listedUnlockLMC 19.46.060(2)(i)
Directional Sign5 ft6 sq ftNot listedNot listed1 per entrance/exitEntrance/exit drivewaysNot listedUnlockLMC 19.46.060(2)(b)
Temporary Promotional Sign18 ftAggregate: 20% of building frontage elevation, total max 150 sq ftNot listedNot listedNot listedOn building/temporary structuresNot listedUnlockLMC 19.46.060(4)(a)

Planned Unit Development

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Model Home Sign42 in12 sq ft, height 42 inNot listedNot listed2 per model homeAt each model homeNot listedUnlockLMC 19.80.130(11)(f)
Subdivision Entry Sign (20+ lots)10 ft32 sq ft (temp), 10 ft highNot listedNot within 50 ft of existing residence property line1 per subdivisionVacant lot at/near entranceNot listedUnlockLMC 19.80.130(11)(k)
Subdivision Entry Sign (4-19 lots)10 ft32 sq ft (temp), 10 ft highNot listedNot within 50 ft of existing residence property line1 per subdivisionVacant lot at/near entranceNot listedUnlockLMC 19.80.130(12)
Temporary Construction/Service Sign36 in8 sq ft, 36 in highNot listedNot within 50 ft of residence1 per professional service/lotOn lot in subdivision under constructionNot listedUnlockLMC 19.80.130(11)(k), (12)
Subdivision Entry Sign (4โ€“19 lots)10 ft32 sq ft (temp); 10 ft highNot listedNot within 50 ft of residence property line1 per subdivisionVacant lot at/near entranceNot listedUnlockLMC 19.80.130(12)
Temporary Construction/Service Sign36 in8 sq ft; 36 in highNot listed50 ft from residence1 per lotLot under constructionNot listedUnlockLMC 19.80.130(11)(k),(12)

PermitPal covers all 16 zoning districts in Longview. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Longview

  • No person shall erect, maintain, alter, repair, remove, use, or continue to use any sign not permitted by Chapter 16.13, Chapter 16.40, or exempt under section 1503.
  • The following signs are prohibited throughout the city: (1) Signs which bear or contain statements, words, or pictures appealing to prurient interest in sex or are patently offensive; (2) Signs resembling any regulatory sign used by governmental entities; (3) Signs or advertising devices located on pedestrian benches containing off-premises advertising or copy; (4) Signs attached to, painted on, or otherwise a part of any vehicle parked or left standing on private property for over 48 hours that advertise a business not on that property (except Temporary Political Signs); (6) Signs utilizing search lights, laser lights, revolving or rotating beams of light, or stroboscopes; (7) Signs using flames or open fire as an illumination source; (8) Signs designed or used for emitting sound or dispersing smells; (9) Awning signs projecting over or under the face/valance of the awning; (10) Signs affixed to trees, shrubs, rocks, or any other natural object.
  • All signs and sign structural members shall be constructed of noncombustible materials, except as specifically allowed by exceptions.
  • Signs identifying or directing attention to a closed, abandoned, or relocated business, service, or profession which has not been removed or obliterated within 30 days are considered a public nuisance.
  • No person shall erect, maintain, alter, remove, or allow the continued use of any sign not permitted, or not exempt, or not in compliance with the relevant codes.
  • Any sign (except certain exceptions) which does not conform to the chapter, and is not a legal nonconforming sign, is subject to removal or brought into conformance under specific conditions.
  • Prohibited for all signs: use of sound devices or dispersal of smell, flames, open fires, or features that create a traffic safety hazard or confusion with official signage.
  • No billboards or outdoor advertising structures shall be constructed outside the specified manufacturing districts; maximum size is 300 sq ft; no electronic, moving, or flashing faces on billboards.

Exempt Signs in Longview

  • Informational signs placed by the City of Longview or by the State of Washington in the publicly owned right-of-way.
  • Memorial tablets, cornerstones, or similar plaques.
  • Official national, state, or local government flags.
  • Religious symbols not exceeding twelve (12) square feet in area.
  • Historical and landmark signs (subject to review and issuance of a Certificate of Appropriateness by Historic Preservation Commission for signs up to 30 sq ft area and less than six feet above grade).
  • Window displays of merchandise not affixed to the window surface, located inside the business, not involving search lights, laser lights, revolving/rotating beams of light or stroboscopes.
  • Building or street address numbers, not exceeding two square feet in area.
  • Affiliation signs for auto-related uses, motels, and hotels (notices of service or trade affiliation, credit cards, etc.), attached to otherwise approved freestanding sign/structure, not exceeding 1/2 sq ft each (max six per business).
  • Names of structures or buildings, commemorative plaques, tablets, or dates of construction, carved in or made of permanent material and mounted on a structure (maximum four sq ft area and six feet height, unless exempt as existing building name signs of historic nature).
  • Billboards as provided in LMC Chapter 16.40.
  • Temporary Political Signs, subject to provisions of section 1403.
  • Temporary Neighborhood Signs, subject to provisions of section 1404.
  • Temporary Construction Signs, subject to provisions of section 1405.
  • Temporary Real Estate Signs, subject to provisions of section 1406.
  • Historically significant signs declared exempt by Resolution of the City Council.
  • Wayfinding signs as approved by the Appeal Board of Adjustment.

Sign Plan & Submission Notes for Longview

  • For installation, erection, re-erection, construction, alteration or maintenance of a sign, a permit and associated plan review are required; the plan review fee for sign installation, erection, re-erection, construction, or alteration is 70% of the permit fee (Sec. 304).
  • Applications for Master/Sign plans, plot plans, or similar (such as for outdoor advertising structures/billboards) must be accompanied by a drawing to scale of the proposed sign and a plot plan showing proposed location and nearby features (16.40.060).
  • Submittal and approval of a sign plot plan required for billboards and advertising structures; approval includes review of location, scale drawing, and plot plan showing existing adjacent buildings, street intersections, and adjacent sign structures within a 600 foot radius.
  • A plan review is required for sign permits as specified in 16.13.015 and 16.13.020.
  • Nonconforming signs which are structurally altered, relocated, or replaced shall be brought into conformance, and sign face changes that do not increase nonconformity may require review except for cases specifically excluded.
  • The Appeal Board of Adjustment has authority to review and approve wayfinding signs via Special Property Use permits, which may involve a form of sign plan or design review process.
  • Approval of a sign permit, associated plot plan, or detailed location drawing is a prerequisite for installation of most permanent and many temporary signs.
  • Subdivision, short subdivision, or binding site plan applications that propose signage typically require submission of a signage plan in the associated application package (cross-references: LMC 19.80.110, 19.80.140, 19.90.040).
  • Temporary sign plans for farmersโ€™ markets in residential districts require annual submission and approval as part of the market's operating standards (19.42.040).

Source: other municipal code