Sign Regulations in Marysville, Washington
Marysville, Washington has specific sign regulations covering 18 sign types across 6 zoning districts. Regulated sign types include Wall Sign - Residential Use, Monument Sign - Residential Subdivision/Multifamily Entrance, Monument Sign - Park, Community Center, Library, Church, School (existing, not reviewed via conditional use). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: June 4, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Marysville, Washington
Sample Sign Requirements in Marysville
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Wall Sign - Residential Use | Not listed | Individual sign: 8 sq ft (nonelectric, occupant/address) or 3 sq ft for home occupation, day care, or adult family home | Min 5 ft from all property lines unless attached to a fence; no extension above the fence height. |
| Monument Sign - Residential Subdivision/Multifamily Entrance | 6 ft | 32 sq ft per face (or 2 × 16 sq ft single-faced) | Outside public right-of-way; does not create obstruction |
| Monument Sign - Park, Community Center, Library, Church, School (existing, not reviewed via conditional use) | 6 ft | 32 sq ft per face | Outside public ROW; must not cause obstruction |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
18
- Wall Sign - Residential Use
- Monument Sign - Residential Subdivision/Multifamily Entrance
- Monument Sign - Park, Community Center, Library, Church, School (existing, not reviewed via conditional use)
- Wall Sign - Park, Community Center, Library, Church, School (existing, not reviewed via conditional use)
- +2 more types
Zoning Districts
6
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Marysville
Other Cities in Washington
Frequently Asked Questions
In Marysville, the height limit for Monument Sign - Residential Subdivision/Multifamily Entrance in the Medium Density Single-Family (R-4.5) and other zoning districts is 6 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Marysville require a permit. From the submission notes on this page: Applications for a sign permit must include scaled plans, site plans, and information on all existing signs (22C.160.040). Run a code check for an exact address to see the permit requirements for that zone.
Marysville's sign code covers 18 sign types, including Wall Sign - Residential Use, Monument Sign - Residential Subdivision/Multifamily Entrance, Monument Sign - Park, Community Center, Library, Church, School (existing, not reviewed via conditional use), and Wall Sign - Park, Community Center, Library, Church, School (existing, not reviewed via conditional use). Most commercial signs need a permit. The ordinance lists 14 exemptions. One of them: Instructional signs on private property not exceeding eight square feet (foundation/electrical work still requires permit) (22C.160.080(4)). The full list is on this page.
In Marysville, Wall Sign - Residential Use in the Medium Density Single-Family (R-4.5) and other zoning districts must be set back at least 5 ft from all property lines unless attached to a fence. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Marysville's sign ordinance that cover digital, changing, or flashing signs: Animated, revolving, or rotating signs are prohibited (except clock hands, permitted electronic message signs, and barber poles) (22C.160.070(2)). Flashing, blinking, fluttering, or moving lights in illuminated signs are prohibited (22C.160.130(2)). Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Marysville Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Marysville, Washington, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
Marysville, Washington Sign Rules at a Glance
Marysville, Washington regulates 18 sign types across 6 zoning districts. Monument Signs - Park, Community Center, Library, Church, School (existing, not reviewed via conditional use) in the Medium Density Single-Family (R-4.5) and other zoning districts are capped at 6 ft tall and 32 sq ft per face. Most commercial signs in Marysville require a permit.
Detailed Sign Ordinance Requirements for Marysville, Washington
Sign Rules by Zoning District in Marysville (6 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Medium Density Single-Family (R-4.5), High Density Single-Family (R-6.5), High Density Single-Family, Small Lot (R-8), Whiskey Ridge, High Density Single-Family (WR-R-4-8), Low Density Multiple-Family (R-12), Medium Density Multiple-Family (R-18), High Density Multiple-Family (R-28), Whiskey Ridge, Medium Density Multiple-Family (WR-R-6-18), Residential Mobile Home Park (R-MHP) | 5 | 6 ft | 32 sq ft per face (or 2 × 16 sq ft single-faced) | Not listed |
| Neighborhood Business (NB), Community Business (CB), Community Business – Whiskey Ridge (CB-WR), General Commercial (GC), Downtown Commercial (DTC), Downtown Core (DC), Main Street (MS), Flex (F), Mixed Use (MU), Flex Residential (FR), Light Industrial (LI), Light Industrial with General Commercial Overlay (LI-GC), General Industrial (GI), Recreation (REC), Public/Institutional (P/I) | 8 | Per letter: 12 in | 200 sq ft per street frontage; 75 sq ft per face | Not listed |
| Downtown Master Plan Area, East Sunnyside – Whiskey Ridge Subarea, Smokey Point Master Plan Area, Lakewood Neighborhood Master Plan Area, Mixed Use – Special District | 1 | Not listed | Not listed | Not listed |
| Small Farms Overlay Zone (SF) | 1 | Not listed | Not listed | Not listed |
| Adult Facilities Overlay Zone (-AF) | 1 | Not listed | Not listed | Not listed |
| General Regulations For All Zones | 2 | Not listed | Up to 8 sq ft for address/occupant; up to 2 sq ft for house #/apartment ID; others per type | Not listed |
Zone-by-Zone Sign Requirements in Marysville(sample of 3 of 6 zones)
Medium Density Single-Family (R-4.5), High Density Single-Family (R-6.5), High Density Single-Family, Small Lot (R-8), Whiskey Ridge, High Density Single-Family (WR-R-4-8), Low Density Multiple-Family (R-12), Medium Density Multiple-Family (R-18), High Density Multiple-Family (R-28), Whiskey Ridge, Medium Density Multiple-Family (WR-R-6-18), Residential Mobile Home Park (R-MHP)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign - Residential Use | Not listed | Individual sign: 8 sq ft (nonelectric, occupant/address) or 3 sq ft for home occupation, day care, or adult family home | Not listed | Min 5 ft from all property lines unless attached to a fence; no extension above the fence height. | 1 per home occupation/day care/adult family home; no explicit limit for allowed address/occupant signage | On dwelling; wall sign, or mounted to a fence (if not exceeding fence height) | Not listed | Unlock | MMC 22C.160.080, 22C.160.150(3), (9) |
| Monument Sign - Residential Subdivision/Multifamily Entrance | 6 ft | 32 sq ft per face (or 2 × 16 sq ft single-faced) | Not listed | Outside public right-of-way; does not create obstruction | 1 per entrance | At each entrance to subdivision or multifamily development | Not listed | Unlock | MMC 22C.160.150(7) |
| Monument Sign - Park, Community Center, Library, Church, School (existing, not reviewed via conditional use) | 6 ft | 32 sq ft per face | Not listed | Outside public ROW; must not cause obstruction | 1 per street frontage | Per street frontage | Not listed | Unlock | MMC 22C.160.150(8) |
| Wall Sign - Park, Community Center, Library, Church, School (existing, not reviewed via conditional use) | Not listed | 32 sq ft permanent wall signage on primary and secondary frontages | Not listed | Not listed | Max wall sign area per frontage | Building wall | Not listed | Unlock | MMC 22C.160.150(8); 22C.160.160 |
| Temporary Signs (Residential Zone) | 6 ft (ground-mounted), 3 ft (stake-mounted/portable); up to 8 ft if >2 acres | 8 sq ft for window or yard signs; up to 32 sq ft (site > 2 acres or by permit) | Not listed | Not listed | Not specified; cumulative area limits apply | In window, yard; not in required parking/drives/sight distance triangles | Not listed | Unlock | MMC 22C.160.260(1)(g), (i), (j) |
Neighborhood Business (NB), Community Business (CB), Community Business – Whiskey Ridge (CB-WR), General Commercial (GC), Downtown Commercial (DTC), Downtown Core (DC), Main Street (MS), Flex (F), Mixed Use (MU), Flex Residential (FR), Light Industrial (LI), Light Industrial with General Commercial Overlay (LI-GC), General Industrial (GI), Recreation (REC), Public/Institutional (P/I)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Wall Sign - Commercial, Industrial, Mixed-Use, Civic | Not listed | No less than 32 sq ft per tenant, up to calculated maximum | Not listed | Not listed | Multiple allowed so long as total does not exceed zone allowance | Primary or secondary frontage; with director approval, on visible side/rear walls with nonilluminated individual letters | Not listed | Unlock | MMC 22C.160.160 and general design standards 22C.020.340 |
| Freestanding Sign - Commercial/Industrial/etc. | Per zone (Table 1): NB/REC 4 ft, CB/GC/LI/GI/LI-GC/P/I 25 ft, CB-WR/REC 12 ft, DTC 12 ft, DC/MS/F/Flex 6 ft, MU 12 ft | 200 sq ft per street frontage; 75 sq ft per face | Not listed | 5 ft min, sight distance review at intersections/driveways | See formula (per frontage/access restrictions) | On private property, minimum setback 5 ft from property line, not in or over ROW | Not listed | Unlock | MMC 22C.160.170 Table 1, (11), (7)-(11), 22C.020.340(1) |
| Electronic Message/Changeable Copy Sign | Per maximum allowed for sign type/zoning | No more than 30% of sign face area | Not listed | As per base sign standard | 1 per street frontage, 1 extra if multi-occupancy and >150 ft apart | Integral to permanent wall or freestanding sign construction | Not listed | Unlock | MMC 22C.160.180 |
| Temporary Signs (Commercial/Industrial/Nonresidential Zones) | 6 ft (ground mounted), 3 ft (stake/portable); up to 8 ft for >2 acres | Window: max 25% of window area; Freestanding/surface-mount: 8 sq ft max, 6 ft high (ground-mounted), 3 ft (stake/portable). On lots >2 acres or by permit: 32 sq ft, 8 ft max. | Not listed | Not listed | Not specified; cumulative limit by site area or window % | Not within required parking/drive/sight triangles; not in ROW (unless per ROW rules) | Not listed | Unlock | MMC 22C.160.260(1)(h)-(i)-(j) |
| Projecting Sign | 3 ft (horiz.), not above parapet/eave/roof (vert.) | Not listed | 8 ft projection (horiz.); 3 ft (vert. or square) | Not listed | Not listed | Commercial uses facing a street; above sidewalk only (not extending past curb) | Not listed | Unlock | MMC 22C.160.210 |
| Marquee/Awning Sign | Not listed | See formula: up to 200% of marquee height, not more than 2/3 marquee width/20 ft; awning sign max 80% of vertical edge, or 2 ft on sloping part, width not to exceed 2/3 of awning/20 ft | Not listed | Not listed | Not listed | On/above awning, marquee/canopy | Not listed | Unlock | MMC 22C.160.220 |
| Under-Canopy Sign | 2 ft high | Not listed | Not listed | Not listed | Not listed | Perpendicular, under awning/canopy/arcade, min 1 ft setback from edge and facade, min 8 ft clearance | Not listed | Unlock | MMC 22C.160.230 |
| Window Sign (Permanent) | Per letter: 12 in | 25% window area | Not listed | Not listed | Not listed | First floor windows of commercial uses with dedicated ground floor entrance | Not listed | Unlock | MMC 22C.160.200 |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Instructional Sign | Not listed | 6 sq ft per sign (exempt under 8 sq ft, or per code) | Not listed | Not listed | Not listed | On-site only | Not listed | Unlock | MMC 22C.160.080(4); 22C.160.190 |
| Exempt Signs - General List | Not listed | Up to 8 sq ft for address/occupant; up to 2 sq ft for house #/apartment ID; others per type | Not listed | Not listed | Not listed | Varies; most allowed on private property only | Not listed | Unlock | MMC 22C.160.080 |
PermitPal covers all 6 zoning districts in Marysville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Marysville
- Billboards are prohibited and must be removed per the amortization schedule (22C.160.070(1), 22C.160.280).
- Animated, revolving, or rotating signs are prohibited (except clock hands, permitted electronic message signs, and barber poles) (22C.160.070(2)).
- Roof signs are prohibited (22C.160.070(3)).
- Internally illuminated cabinet or box signs (including changeable copy) are prohibited (22C.160.070(4)).
- Signs creating safety hazards for vehicles or pedestrians are prohibited (22C.160.070(5)).
- No signs located in or on the public right-of-way (22C.160.070(6)), unless allowed for projecting wall signs or permitted temporary signs.
- Temporary signs not meeting the requirements of 22C.160.260 are prohibited (22C.160.070(7)).
- Signs on utility poles, street lights, traffic standards, or trees are prohibited (except government/utility signs) (22C.160.070(8)).
- Signs not meeting this chapter’s requirements, nonconforming signs, signs installed without a permit, and abandoned signs are prohibited (22C.160.070(9)).
- Displays of banners, festoons, flags, posters, pennants, ribbons, streamers, strings of lights, strobe/glare lights, flares, balloons, bubble machines, and similar devices are prohibited if visible off-site, except for temporary use as allowed (22C.160.070(10)).
- Signs which may be confused with traffic controls or obstruct the visibility of traffic or street signs/signals are prohibited (22C.160.070(11)).
- Obscene signs are prohibited (22C.160.070(12)).
- Signs in residential zones are limited: total nonexempt sign area per lot (except temporary signs) not to exceed nine square feet (with certain exceptions) and no roof or pole/pylon signs (22C.160.150).
- Flashing, blinking, fluttering, or moving lights in illuminated signs are prohibited (22C.160.130(2)).
- Temporary signs are prohibited in required sight distance triangles and may not obstruct sidewalks, driveways, or public access (22C.160.260).
Exempt Signs in Marysville
- Change of face or advertising copy of an existing, legally permitted sign (22C.160.080(1)).
- Temporary signs meeting requirements of 22C.160.260 (22C.160.080(2)).
- Nonelectric signs up to eight square feet per face limited to occupant name and address in residential zones (22C.160.080(3)).
- Instructional signs on private property not exceeding eight square feet (foundation/electrical work still requires permit) (22C.160.080(4)).
- Menu signs on private property (foundation/electrical work still requires permit) (22C.160.080(5)).
- Non-advertising sculptures, fountains, benches, lighting, seasonal decorations, mosaics, murals, landscaping, and similar design features (22C.160.080(6)).
- Signs not visible from a public way, interior signs more than 3 feet from window/not facing a window, and point-of-purchase displays (22C.160.080(7)).
- Traffic or municipal signs, signs required by law/emergency services/railroad, and legal notices (22C.160.080(8)).
- Signs of public utility companies for safety, underground facility location, or public phones (22C.160.080(9)).
- Memorials, building names, stained glass, and dates of erection cut into or projecting up to 2" from building surface (22C.160.080(10)).
- Incidental signs (e.g., 'no trespassing,' 'no dumping,' etc.) up to three square feet (22C.160.080(11)).
- Flush-mounted wall signs showing occupant name/address for dwellings up to two square feet (22C.160.080(12)).
- Gateway entrance signs complying with city gateway master plan (22C.160.080(13)).
- Public wayfinding, directional, and interpretive signs (building permit required for structural/electrical) (22C.160.080(14)).
Sign Plan & Submission Notes for Marysville
- Sign permits are generally required to erect or display a sign unless the sign type is specifically exempted (22C.160.030, 22C.160.080).
- Applications for a sign permit must include scaled plans, site plans, and information on all existing signs (22C.160.040).
- A master or coordinated sign plan is required for planned developments, multi-tenant complexes, campuses, master planned senior communities, multi-building projects, and can be required by subarea master plans or overlay districts (see cross-reference in 22C.160.120; master plan requirements may supersede this chapter for sign regulations).
- Sign variances are available and are processed by the hearing examiner consistent with variance criteria (22C.160.300).
- For bonus allowance (exceptional sign design), a written request and site plan showing all signage must be submitted and is reviewed by the director; exceeding the bonus limits requires a variance (22C.160.290).
- Amortization and removal requirements apply for billboards and nonconforming signs (22C.160.270–.280).
- Signs within subarea master plans or special overlay districts must comply with stricter requirements if in conflict with general sign code (22C.160.120).
Source: other municipal code