Questions? Call us at (262) 218-2915

Sign Regulations in Campbellsport, Wisconsin

Campbellsport, Wisconsin has specific sign regulations covering 12 sign types across 4 zoning districts. Regulated sign types include Wall Sign, Mansard Roof Sign, Canopy Sign. Height restrictions apply. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Campbellsport, Wisconsin

Sample Sign Requirements in Campbellsport

Sign TypeMax HeightMax AreaSetback
Wall SignNot listed200 square feetNot listed
Canopy SignNot less than eight feet from the sidewalkNot listedNot listed
Pole-Mounted Sign22 feet150 square feet5 feet; 110 feet along Highway 67 in Timber Park Estates District

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for CampbellsportPartial Coverage

Sign Types Covered

12

  • Wall Sign
  • Mansard Roof Sign
  • Canopy Sign
  • Pole-Mounted Sign
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Height restrictions
  • Illumination rules

Official Resources for Campbellsport

Municipal Code1 permit application link available

Frequently Asked Questions

In Campbellsport, the height limit for Pole-Mounted Sign in the Commercial and Industrial Districts is 22 feet (Sec. 385-36). Maximum sign heights range from 6 feet to 22 feet across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

From the submission notes on this page: The Building Inspector may require that the application be accompanied by a plan or design of the sign showing its weight, dimensions, electrical or gas equipment, and details of its position relative to the building and to all property lines. Run a code check for an exact address to see the permit requirements for that zone.

Campbellsport's sign code covers 12 sign types, including Wall Sign, Mansard Roof Sign, Canopy Sign, and Pole-Mounted Sign. The ordinance lists 5 exemptions. One of them: Any sign inside a building. The full list is on this page.

In Campbellsport, Pole-Mounted Sign in the Commercial and Industrial Districts must be set back 5 feet (Sec. 385-36). The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Campbellsport's sign ordinance that cover digital, changing, or flashing signs: Flashing, blinking, or animated signs. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Campbellsport Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Campbellsport, Wisconsin, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Campbellsport, Wisconsin Sign Rules at a Glance

Campbellsport, Wisconsin regulates 12 sign types across 4 zoning districts. Subdivision Identification Signs are capped at 6 feet tall and 24 square feet, set back 10 feet from street right-of-way (Sec. 385-26).

Detailed Sign Ordinance Requirements for Campbellsport, Wisconsin

Sign Rules by Zoning District in Campbellsport (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Commercial and Industrial Districts622 feet200 square feetNot listed
Residential Zones26 feet24 square feetNot listed
Agricultural Zones1Not listed8 square feetNot listed
General Regulations For All Zones36 feet24 square feetNot listed

Zone-by-Zone Sign Requirements in Campbellsport(sample of 3 of 4 zones)

Commercial and Industrial Districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed200 square feetNot listedNot listedNot listedAttached to the buildingNot listedUnlock§ 385-33
Mansard Roof SignNot listedNot listedNot listedNot listedNot listedOn mansard roofNot listedUnlock§ 385-34
Canopy SignNot less than eight feet from the sidewalkNot listedFixed: 48 inches; Retractable: 72 inches from the face of the buildingNot listedNot listedAttached to awning or canopyNot listedUnlock§ 385-35
Pole-Mounted Sign22 feet150 square feetNot listed5 feet; 110 feet along Highway 67 in Timber Park Estates DistrictOne per parcel of frontageFreestandingNot listedUnlock§ 385-36
Ground-Mounted SignNot listed100 square feetNot listed5 feet; 110 feet along Highway 67 in Timber Park Estates DistrictOne per parcel of frontageFreestandingNot listedUnlock§ 385-36
Projecting SignNot listed15 square feetNot listedNot listedOne per parcelAttached to buildingNot listedUnlock§ 385-37

Residential Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Home Occupation SignNot listed5 square feetNot listedNot listedOne per home occupationOn buildingNot listedUnlock§ 385-27
Multifamily Unit Sign6 feet24 square feetNot listed10 feet from street right-of-wayOne per street frontageFreestandingNot listedUnlock§ 385-28

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary SignNot listedNot listedNot listedNot listedNot listedVarious locationsNot listedUnlock§ 385-4
Political SignNot listedNot listedNot listedNot listedNot listedPrivate propertyNot listedUnlock§ 385-24
Subdivision Identification Sign6 feet24 square feetNot listed10 feet from street right-of-wayOne per principal entrancePrincipal entrance of subdivisionNot listedUnlock§ 385-26

PermitPal covers all 4 zoning districts in Campbellsport. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Campbellsport

  • Signs painted on, attached to, or supported by a tree, stone, cliff, or other natural object
  • Signs painted directly onto building walls
  • Spotlights or beacons
  • Signs placed upon metal light poles, stop signs or traffic signs without written consent from the authorizing agent of the owner of the pole or sign
  • Flashing, blinking, or animated signs
  • Signs in the public right-of-way, except signs erected by a governmental agency, a franchise public utility company, or a contractor doing authorized or permitted work within the public right-of-way
  • Revolving, rotating or otherwise moving signs
  • Illuminated signs and spotlights which are directed at motorists or adjacent properties
  • Directly illuminated signs that are prohibited within areas zoned residential
  • It shall be unlawful to use a vehicle or trailer as a sign in circumvention of this chapter

Exempt Signs in Campbellsport

  • Traffic signs or signals, street signs or railroad signs or any other safety-related signs placed by a utility or any unit of government
  • Christmas or other seasonal decorations on residential lots and with no commercial message
  • Any public notice or warning required by a valid and applicable federal, state or local law, regulation or ordinance
  • Any sign inside a building
  • Works of art that do not include any commercial message

Sign Plan & Submission Notes for Campbellsport

  • The Building Inspector may require that the application be accompanied by a plan or design of the sign showing its weight, dimensions, electrical or gas equipment, and details of its position relative to the building and to all property lines

Source: ecode360 municipal code