Sign Regulations in Twin Lakes, Wisconsin

Twin Lakes, Wisconsin has specific sign regulations covering 51 sign types across 5 zoning districts. Regulated sign types include All Signs - General Location/Attachment Limits, Business Signs - Total Allowed Area (All Non-Residential Uses), Wall Sign (General Regulations). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: February 19, 2026

Sign Regulation Overview for Twin Lakes, Wisconsin

Sample Sign Requirements in Twin Lakes

Sign TypeMax HeightMax AreaSetback
All Signs - General Location/Attachment LimitsProjecting signs may extend up to 5 ft above high point or peak of roof/wall/parapet to which attached; no other sign may extend above such high point or peak (17.57.100(B))See subsections D, L.1, O, Q for specific sign-type limits; overall per-building-side limit appliesGeneral setback: all signs must be set back 5 ft from front lot line or side yard lot line on corner lots; in Commercial, Industrial and Business Park Districts, a detached or projecting sign with lowest point ≥10 ft above ground may be within 5 ft setback but not into public highway ROW (17.57.100(G)). Vision setback at sidewalks/intersections min 10 ft (17.57.100(C)).
Business Signs - Total Allowed Area (All Non-Residential Uses)Detached sign total vertical height including supports ≤20 ft measured from adjacent grade (17.57.100(L)(1)). Roof sign area limited but no specific height; still subject to not extending above peak/roof limit except projecting signs (17.57.100(B),(L)(2)).Per building side: 25 sq ft minimum, 300 sq ft maximum of restricted signs per first-floor business; individual detached sign face ≤100 sq ft; individual roof sign face ≤100 sq ft (17.57.100(D),(L)).5 ft from front/side yard lot line generally; see setback rule in 17.57.100(G); additional 10 ft vision setback near sidewalks/intersections (17.57.100(C),(G)).
Wall Sign (General Regulations)May not extend above high point/peak of roof, wall, or parapet to which attached (17.57.100(B)).≤100 sq ft per wall sign (17.57.100(O)), subject also to total allowed gross surface area per building side (17.57.100(D)).Indirectly affected by building setback; wall signs themselves follow building wall; must respect vision setbacks for traffic safety (17.57.100(C)).

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Twin LakesFull Coverage

Sign Types Covered

51

  • All Signs - General Location/Attachment Limits
  • Business Signs - Total Allowed Area (All Non-Residential Uses)
  • Wall Sign (General Regulations)
  • Projecting Sign (General Regulations)
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Twin Lakes

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Twin Lakes, wall signs can be up to May not extend above high point/peak of roof, wall, or parapet to which attached (17.57.100(B)).. Height limits vary by zoning district and sign type. Use PermitPal to get exact requirements for your specific location.

To get a sign permit in Twin Lakes, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Twin Lakes, regulated sign types include All Signs - General Location/Attachment Limits, Business Signs - Total Allowed Area (All Non-Residential Uses), Wall Sign (General Regulations), Projecting Sign (General Regulations), and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Twin Lakes vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Twin Lakes are regulated with specific requirements for brightness, animation, and message duration. Twin Lakes has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Twin Lakes Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Twin Lakes, Wisconsin sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds