Sign Regulations in Bennett, Colorado
Bennett, Colorado has specific sign regulations covering 29 sign types across 3 zoning districts. Regulated sign types include Awning or Canopy Sign, Directional Sign, Monument Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 7, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Bennett, Colorado
Sample Sign Requirements in Bennett
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Banner | Not listed | 100 sq ft | Not listed |
| Wave Banner | 12 ft | 50 sq ft per banner | Not listed |
| Window Sign (Permanent) | Not listed | 25% of window area | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
29
- Awning or Canopy Sign
- Directional Sign
- Monument Sign
- Site Sign
- +2 more types
Zoning Districts
3
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Bennett
Other Cities in Colorado
Frequently Asked Questions
In Bennett, the height limit for Pole Sign in the Nonresidential Zoning Districts (C, EC, I-1, I-2, P) and other zoning districts is 60 ft. The height limit for Wall Sign (Single-family or two-family home-based business) in the Residential Zoning Districts (RE, R-1, R-2, R-3, MH) and other zoning districts is 8 ft. Maximum sign heights range from 12 ft to 60 ft across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Bennett require a permit. From the submission notes on this page: Applications for sign permits and sign plans (when required) must be submitted per the Applicant Guide. Run a code check for an exact address to see the permit requirements for that zone.
Bennett's sign code covers 29 sign types, including Awning or Canopy Sign, Directional Sign, Monument Sign, and Site Sign. Most commercial signs need a permit. The ordinance lists 20 exemptions. One of them: Works of art, as defined in Section 16-3-210. The full list is on this page.
In Bennett, Pole Sign in the Nonresidential Zoning Districts (C, EC, I-1, I-2, P) and other zoning districts must be set back at least 10 ft from property line, 4 ft from building. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Bennett's sign ordinance that cover digital, changing, or flashing signs: Any sign displaying flashing or intermittent lights, or lights of varying intensity of illumination. The following sign elements are prohibited: animated, flashing, or moving parts (except electronic message centers with static transitions), non-durable cardboard, card stock or paper (except for window signs), raw or unpainted plywood, and unapproved spray-painted signs. Temporary decorations or displays associated with holidays or religious celebrations (any type, number, area, height, location, illumination, or animation). Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Bennett Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Bennett, Colorado, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Bennett, Colorado Sign Rules at a Glance
Bennett, Colorado regulates 29 sign types across 3 zoning districts. Site Signs in the Residential Zoning Districts (RE, R-1, R-2, R-3, MH) and other zoning districts are capped at 6 ft tall and 16 sq ft, set back at least 5 ft from property line. Most commercial signs in Bennett require a permit.
Detailed Sign Ordinance Requirements for Bennett, Colorado
Sign Rules by Zoning District in Bennett (3 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 8 | 12 ft | 100 sq ft | Not listed |
| Residential Zoning Districts (RE, R-1, R-2, R-3, MH), Residential land use designations within an agricultural or residential PD zoning district | 11 | 12 ft | 96 sq ft per sign | Not listed |
| Nonresidential Zoning Districts (C, EC, I-1, I-2, P), Nonresidential land use designations within an agricultural, residential or PD zoning district | 16 | 60 ft | 380 sq ft | Not listed |
Zone-by-Zone Sign Requirements in Bennett
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Banner | Not listed | 100 sq ft | Not listed | Not listed | 1 per business | On building wall | Not listed | Unlock | Sec. 16-3-350(2) |
| Wave Banner | 12 ft | 50 sq ft per banner | Not listed | Not listed | 2 per business | Not listed | Not listed | Unlock | Sec. 16-3-350(2) |
| Inflatable Sign | Not listed | Not listed | Not listed | Not listed | 1 per nonresidential property | Securely anchored or tethered to ground, building, or structure | Not listed | Unlock | Sec. 16-3-350(2), (16) |
| Window Sign (Permanent) | Not listed | 25% of window area | Not listed | Not listed | Not listed | On or within 1 ft of window, visible from exterior | Not listed | Unlock | Sec. 16-3-350(6) |
| Window Sign (Temporary) | Not listed | 70% of window area | Not listed | Not listed | Not listed | On or within 1 ft of window, visible from exterior | Not listed | Unlock | Sec. 16-3-350(7) |
| Address Sign | Not listed | 6 sq ft per sign | Not listed | Not listed | 2 per building | Attached to building, visible from street | Not listed | Unlock | Sec. 16-3-350(8) |
| Portable A-frame Sign | 4 ft | 6 sq ft per face | Not listed | Not listed | 1 per business | On sidewalk/public right-of-way if bldg at 0 setback; Must maintain 3-foot walkway | Not listed | Unlock | Sec. 16-3-350(10) |
| Vehicular Sign | 1 ft above vehicle roof | Not listed | Not listed | Not listed | Not listed | Affixed to business vehicle, used for daily operation | Not listed | Unlock | Sec. 16-3-350(19) |
Residential Zoning Districts (RE, R-1, R-2, R-3, MH), Residential land use designations within an agricultural or residential PD zoning district
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Awning or Canopy Sign | No higher than roof or parapet line; 9 ft min pedestrian clearance; 14 ft min vehicular clearance | 0.5 sq ft per linear foot of awning/canopy | Not listed | Not listed | 1 per door or window | On awnings/canopies attached to building | Not listed | Unlock | Table 3.1; Sec. 16-3-410(1); Sec. 16-3-420(1)-(2) |
| Directional Sign | 4 ft | 6 sq ft | Not listed | 5 ft min from property line | Per approved sign plan | No closer than 5 ft from any property line | Not listed | Unlock | Table 3.1; Sec. 16-3-410(1); Sec. 16-3-420(3) |
| Monument Sign | 6 ft | 32 sq ft | Not listed | Min. setback equal to sign height | 1 or 2 depending on use | Site frontage adjoining public/private street, easement, or right-of-way; Setback at least equal to sign height | Not listed | Unlock | Table 3.1; Sec. 16-3-410(1); Sec. 16-3-420(6) |
| Site Sign | 6 ft | 16 sq ft | Not listed | 5 ft min from property line | 1 per street frontage | Setback min 5 ft from property line; not on parcels with existing residential uses | Not listed | Unlock | Table 3.1; Sec. 16-3-410(1); Sec. 16-3-420(11) |
| Swing Sign | 6 ft | 6 sq ft inclusive of riders | Not listed | Not listed | 1 per street frontage | Not listed | Not listed | Unlock | Table 3.1; Sec. 16-3-410(1); Sec. 16-3-430(1) |
| Wall Sign (Single-family or two-family home-based business) | 8 ft | 2 sq ft | Not listed | Not listed | 1 per home-based business | No obstruction of window, door, or architectural detail | Not listed | Unlock | Table 3.1; Sec. 16-3-410(1); Sec. 16-3-420(10) |
| Wall Sign (Multi-family) | No higher than 1 ft below roof or parapet line | 32 sq ft | Not listed | Not listed | 1 per building per street frontage | No obstruction of window, door, or architectural detail | Not listed | Unlock | Table 3.1; Sec. 16-3-410(1); Sec. 16-3-420(10) |
| Wall Sign (Public/Quasi-public/Institutional) | No higher than 1 ft below roof or parapet line | 32 sq ft | Not listed | Not listed | 1 per use | No obstruction of window, door, or architectural detail | Not listed | Unlock | Table 3.1; Sec. 16-3-410(1); Sec. 16-3-420(10) |
Nonresidential Zoning Districts (C, EC, I-1, I-2, P), Nonresidential land use designations within an agricultural, residential or PD zoning district
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Awning or Canopy Sign | No higher than roof/parapet line; 9 ft min pedestrian clearance; 14 ft min vehicular clearance | 0.5 sq ft per linear foot of awning/canopy | Not listed | Not listed | Unlimited | First and second-story building frontages incl. parking lot or ped. way; Not extending beyond, above, or below face of awning/canopy | Not listed | Unlock | Table 3.2; Sec. 16-3-410(2); Sec. 16-3-420(1)-(2) |
| Directional Sign | 4 ft (14 ft if used on vehicular clearance structure) | 6 sq ft | Not listed | 5 ft min from property line | Per approved sign plan | No closer than 5 ft from property line | Not listed | Unlock | Table 3.2; Sec. 16-3-410(2); Sec. 16-3-420(3) |
| Monument Sign | 8 ft (<150' frontage); 10 ft (>150'); 25 ft (multi-tenant/unified site) | 75 sq ft (<150' frontage); 150 sq ft (multi-tenant/unified site) | Not listed | Min. setback equal to sign height | 1 per legal lot or multi-tenant site | On site frontage adjoining public/private street, easement, or r.o.w.; Setback at least equal to sign height | Not listed | Unlock | Table 3.2; Sec. 16-3-410(2); Sec. 16-3-420(6) |
| Menu Sign | 7 ft | 75 sq ft per drive-through lane | Not listed | Not listed | 2 per drive-through lane | Permanently mounted at drive-up/through facility, not legible from adjacent street r.o.w. | Not listed | Unlock | Table 3.2; Sec. 16-3-410(2) |
| Pole Sign | 60 ft | 380 sq ft | Not listed | 10 ft min from property line, 4 ft from building | 1 per qualifying property | Site frontage adjoining public/private street, easement, or r.o.w.; Min 10 ft from property line, 4 ft from building; Only within prescribed proximity to I-70/SH79 | Not listed | Unlock | Table 3.2; Sec. 16-3-410(2); Sec. 16-3-420(7) |
| Projecting Sign | No higher than roof/parapet line; 9 ft min height | 15 sq ft | Not listed | Not listed | 1 per building entrance | On ground floor facade, or above ground with exterior access | Not listed | Unlock | Table 3.2; Sec. 16-3-410(2); Sec. 16-3-420(8) |
| Roof Sign | No higher than 4 ft above roofline/parapet/fascia wall; no higher than roofline (peaked/mansard) | 100 sq ft | Not listed | Not listed | 1 per principal building | May be permitted when wall or freestanding sign is not feasible | Not listed | Unlock | Table 3.2; Sec. 16-3-410(2); Sec. 16-3-420(9) |
| Site Sign | 8 ft | 32 sq ft | Not listed | 5 ft min from property line | 1 per street frontage | Setback min 5 ft from property line; not on parcels with existing residential uses | Not listed | Unlock | Table 3.2; Sec. 16-3-410(2); Sec. 16-3-420(11) |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Bennett with a free PermitPal account.
Run a free code checkProhibited Signs in Bennett
- All signs not expressly permitted under this Article, or exempt from regulation in accordance with Section 16-3-350.
- Signs attached to trees or other plant materials.
- Any revolving or rotating sign.
- Any sign displaying flashing or intermittent lights, or lights of varying intensity of illumination.
- Any sign with direct or indirect lighting that causes direct glare into or upon adjacent lots, tracts, or public rights-of-way.
- Signs contributing to confusion of traffic control devices or emergency service vehicles, or which hide or interfere with the effectiveness of such devices or vehicles.
- Any sign that obstructs access to or impedes operation of any window, door, fire escape, stairway, ladder, or opening intended to provide light, air, ingress, or egress for any building required by law.
- Any sign that impedes safe pedestrian or vehicular movement.
- Any sign that obstructs the view of a person operating a motor vehicle in any direction at intersections or driveways.
- Any sign that emits a sound which is intended to attract attention.
- Any off-premises sign not otherwise explicitly permitted in this Article.
- Any sign attached to a building that projects above the top of the building, unless explicitly permitted as a roof sign.
- The following sign elements are prohibited: animated, flashing, or moving parts (except electronic message centers with static transitions), non-durable cardboard, card stock or paper (except for window signs), raw or unpainted plywood, and unapproved spray-painted signs.
- It is unlawful to erect or install any sign without having first obtained the permits required by this Article and the Town's building code.
- No sign shall interfere with street intersection visibility or adversely affect public health, safety, or welfare.
- No sign may be placed on public property or in the public right-of-way without a revocable permit.
Exempt Signs in Bennett
- Flags, subject to limits on height and placement.
- Banners and inflatable signs, under specific size, number, illumination, and placement restrictions.
- Signs erected by governmental or quasi-governmental agencies (e.g. traffic, legal notice, community events, wayfinding).
- Signs erected by public utility, oil and gas, or construction companies to warn of danger/hazard, or indicate underground utilities.
- Any sign displayed on a window or inside a residential building.
- Permanent window signs (up to 25% of total window area in commercial zones, illuminated only when the business is open).
- Temporary window signs (up to 70% of total window area in commercial zones).
- Posting of addresses on buildings (signs up to 6 sq ft, attached to the building, max 2 per building, may be illuminated).
- Temporary decorations or displays associated with holidays or religious celebrations (any type, number, area, height, location, illumination, or animation).
- Portable A-frame signs (1 per business in commercial zones, up to 6 sq ft per face, specific location and use limitations).
- Yard signs, subject to standards in Division 4.
- Site signs, subject to standards in Division 4.
- Swing signs, subject to standards in Division 4.
- Notification signs up to 2 sq ft in area as defined in Section 16-3-210.
- Works of art, as defined in Section 16-3-210.
- Inflatable signs (one per nonresidential property).
- External accessory use signs limited to an aggregate sign area of 40 sq ft.
- Signs carried by a person that are not set on or affixed to the ground or propped on objects.
- Vehicular signs (signs on vehicles primarily used for business purposes other than advertising, with restrictions on placement and projection above vehicle roofline).
- Changing or replacing the copy on an existing lawful sign, provided the nature of the sign is not changed and it remains in compliance with this Article.
Sign Plan & Submission Notes for Bennett
- A sign permit is required prior to the erection or installation of any permitted permanent or temporary sign, except for exempt signs under Section 16-3-350.
- Sign permits are required for master sign plans and/or sign programs specified in an approved final development plan.
- A revocable permit is required for any sign located on public property or within a public right-of-way.
- A sign plan is required for directional signs (approval by the Zoning Administrator).
- Applications for sign permits and sign plans (when required) must be submitted per the Applicant Guide.
- If a modification to sign standards is requested that does not qualify as a minor modification, a variance must be obtained.
- For master planned residential communities, multi-tenant retail centers, industrial parks, or other unified commercial developments, a master sign plan may be submitted for coordinated/shared signage; may be incorporated into Outline Development Plan in PD zone districts.
- The Zoning Administrator may vary standards for area, height, and number of individual signs based on a submitted master sign plan showing exceptional design.
- Directional signs require a sign plan approved by the Zoning Administrator.
- Sign permits for temporary signs must specify the dates for erection and removal.
- Alterations to existing signs require a new permit, unless the alteration does not change size, height, background, shape, or location and is less than 50% of replacement cost.
Source: municode municipal code