Questions? Call us at (262) 218-2915

Sign Regulations in Eaton, Colorado

Eaton, Colorado has specific sign regulations covering 24 sign types across 5 zoning districts. Regulated sign types include Freestanding or Ground Sign, Wall Sign, Window Sign - Temporary. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 7, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Eaton, Colorado

Sample Sign Requirements in Eaton

Sign TypeMax HeightMax AreaSetback
Freestanding or Ground Sign50 ft above ground125 sq ft per sign face; additional cabinets on same structure not to exceed 32 sq ft each per cabinet (up to 4 cabinets)Not listed
Wall SignNot listed125 sq ft per sign faceNot listed
Window Sign - TemporaryNot listed50% of window areaNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for EatonFull Coverage

Sign Types Covered

24

  • Freestanding or Ground Sign
  • Wall Sign
  • Window Sign - Temporary
  • Window Sign - Permanent
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Eaton

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Eaton, the height limit for Freestanding or Ground Sign in the Commercial Zoning Districts (C), Industrial Zoning Districts (I) is 50 ft above ground (Sec. 7-10-4(a)(1)-(7)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Eaton require a permit. From the submission notes on this page: If a hearing is requested (regarding sign violations or permits), the Town Board acts upon the application/request after receiving a recommendation from the Planning and Zoning Commission. Run a code check for an exact address to see the permit requirements for that zone.

Eaton's sign code covers 24 sign types, including Freestanding or Ground Sign, Wall Sign, Window Sign - Temporary, and Window Sign - Permanent. Most commercial signs need a permit. The ordinance lists 20 exemptions. One of them: Address signs are exempt from permit requirements. The full list is on this page.

We haven't published Eaton's sign setback rules on this page yet. Run a code check for an exact address to see them.

Rules in Eaton's sign ordinance that cover digital, changing, or flashing signs: Flashing red, green, or amber signs located within 100 feet of an intersection are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Eaton Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Eaton, Colorado, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds

Eaton, Colorado Sign Rules at a Glance

Eaton, Colorado regulates 24 sign types across 5 zoning districts. Freestanding or Ground Signs in the Commercial Zoning Districts (C), Industrial Zoning Districts (I) are capped at 50 ft above ground (Sec. 7-10-4(a)(1)-(7)). Most commercial signs in Eaton require a permit.

Detailed Sign Ordinance Requirements for Eaton, Colorado

Sign Rules by Zoning District in Eaton (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Commercial Zoning Districts (C), Industrial Zoning Districts (I)850 ft above ground125 sq ft per sign face; additional cabinets on same structure not to exceed 32 sq ft each per cabinet (up to 4 cabinets)Not listed
Residential Zoning Districts (R), Residential zoning districts5Not listed20 sq ft (includes all faces)Not listed
Planned Unit Development Zoning Districts (PUD)1Not listedNot listedNot listed
Nonresidential and public zoning districts130 ft from the ground for pole-mounted fixtures; building-mounted fixtures no higher than the structureNot listedNot listed
General Regulations For All Zones9Not listed100 sq ft (no limit for US flag)Not listed

Zone-by-Zone Sign Requirements in Eaton(sample of 3 of 5 zones)

Commercial Zoning Districts (C), Industrial Zoning Districts (I)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding or Ground Sign50 ft above ground125 sq ft per sign face; additional cabinets on same structure not to exceed 32 sq ft each per cabinet (up to 4 cabinets)Not listedNot listed1 per property, exceptions for larger/multiple frontagesOn-premises; one freestanding or ground sign per property, except as allowed for multi-frontage or >150 ft lotsNot listedUnlockSec. 7-10-4(a)(1)-(7)
Wall SignNot listed125 sq ft per sign faceNot listedNot listedLimited by total area formula and maximum wall coverageMounted to exterior face of building; area as defined in 'wall' definitionNot listedUnlockSec. 7-10-4(a)(1)-(7); Sec. 7-10-3 'Wall'
Window Sign - TemporaryNot listed50% of window areaNot listedNot listedLimited by window areaWithin 12 inches of exterior windowNot listedUnlockSec. 7-10-3 'Window signs'; Sec. 7-10-6(20)
Window Sign - PermanentNot listed50% of window areaNot listedNot listedLimited by window areaWithin 12 inches of exterior windowNot listedUnlockSec. 7-10-3 'Window signs'; Sec. 7-10-6(20)
Special Sign (Includes sandwich boards, counter balance, A frames, similar devices)Not listed16 sq ft per faceNot listedNot listed1 per street frontageOn private property only; not allowed on public right-of-wayNot listedUnlockSec. 7-10-3 'Special signs'; Sec. 7-10-6(18)
Temporary Sign (Including banners, pennants, balloons)Not listedNot listedNot listedNot listedNot listedNot listedNot listedUnlockSec. 7-10-3 'Temporary signs'; Sec. 7-10-6(19)
Real Estate SignNot listed32 sq ft per face for commercial and industrial propertyNot listedNot listedNot listedOn the offered propertyNot listedUnlockSec. 7-10-3 'Real estate sign'; Sec. 7-10-6(15)
Contractor SignNot listed32 sq ft (unless additional required by federal or state law)Not listedNot listedNot listedOn property where construction takes placeNot listedUnlockSec. 7-10-3 'Contractor sign'; Sec. 7-10-6(5)

Residential Zoning Districts (R), Residential zoning districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Home Occupation Identification SignNot listed6 sq ft per faceNot listedNot listed1On property of home occupation in existence at time of ordinanceNot listedUnlockSec. 7-10-4(b)(2), (6)
Commercial Sign - Residential ZoneNot listedNot listedNot listedNot listedNot listedWithin residentially zoned propertyNot listedUnlockSec. 7-10-4(b)(3), 7-10-3 'Commercial sign - residential zone'
Community Facility SignNot listedNot listedNot listedNot listedNot listedWithin residentially zoned district for use facilitating community serviceNot listedUnlockSec. 7-10-4(b)(4), 7-10-3 'Community facility sign'
Quasi-Commercial SignNot listedNot listedNot listedNot listedNot listedWithin residentially zoned propertyNot listedUnlockSec. 7-10-4(b)(5), 7-10-3 'Quasi-commercial sign'
Residential Complex/Subdivision Identification SignNot listed20 sq ft (includes all faces)Not listedNot listed2 per driveway/roadwayOn-site; 2 per driveway/roadway providing public accessNot listedUnlockSec. 7-10-3 'Residential complex or subdivision identification sign'; Sec. 7-10-6(17)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Address SignNot listed2 sq ft per signNot listedNot listed2 per dwelling or business per street frontNot listedNot listedUnlockSec. 7-10-3 'Address signs'; Sec. 7-10-6(1)
Commemorative SignNot listed10 sq ftNot listedNot listedNot listedNot listedNot listedUnlockSec. 7-10-3 'Commemorative sign'; Sec. 7-10-6(2)
Community Event SignNot listed6 sq ft per signNot listedNot listedNot listedAttached to permanent structuresNot listedUnlockSec. 7-10-3 'Community event sign'; Sec. 7-10-6(3)
Directional On-Site SignNot listed6 sq ftNot listedNot listedNot listedOn-siteNot listedUnlockSec. 7-10-3 'Directional on-site sign'; Sec. 7-10-6(6)
Flag, Pennant or InsigniaNot listed100 sq ft (no limit for US flag)Not listedNot listedNot listedNot listedNot listedUnlockSec. 7-10-3 'Flag, pennant or insignia'; Sec. 7-10-6(7)
Political SignNot listed32 sq ft per faceNot listedNot listedNot listedNot listedNot listedUnlockSec. 7-10-3 'Political sign'; Sec. 7-10-6(11)
Public Phone SignNot listed3 sq ft per face, max 2 facesNot listedNot listedMaximum 2 faces per signNot listedNot listedUnlockSec. 7-10-3 'Public phone sign'; Sec. 7-10-6(13)
Incidental SignNot listed1.5 sq ft per signNot listedNot listedNot listedAttached to permanent structureNot listedUnlockSec. 7-10-3 'Incidental signs'; Sec. 7-10-6(9)

PermitPal covers all 5 zoning districts in Eaton. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Eaton

  • It shall be unlawful to erect a sign without a permit as provided.
  • Signs shall not be located less than six (6) feet horizontally or twelve (12) feet vertically from overhead electrical conductors energized in excess of 750 volts.
  • Signs or sign structures shall not be erected in such a manner that their surface or supports will interfere with the free use of any fire escape, exit, or standpipe.
  • Signs shall not obstruct openings to the extent that light or ventilation is reduced below the required minimum.
  • Signs or sign structures shall not project into public rights-of-way or alleys.
  • Signs shall not project within two (2) feet of the curb line.
  • Signs shall not project over driveways, parking lots, or similar areas of vehicular travel below a height of fourteen (14) feet above grade.
  • Signs shall not project over pedestrian ways below a height of eight (8) feet above grade.
  • Freestanding or ground signs may be constructed of any material meeting code; other signs must be constructed of noncombustible materials except for non-electric wall signs where permitted.
  • Combustible materials other than approved plastics shall not be used in electric sign construction.
  • Roof signs are prohibited in all zoning districts.
  • Mechanical or electrical appurtenances such as 'revolving beacons' designed solely to compel attention are prohibited.
  • Flashing red, green, or amber signs located within 100 feet of an intersection are prohibited.
  • Any sign located so as to conflict with the clear and obvious appearance of public devices controlling traffic is prohibited.
  • Any sign or portion of a sign using an exposed incandescent or high-intensity lamp (except neon) projecting light directly onto adjoining property or a right-of-way is prohibited.
  • Stationary off-premises advertising devices (except kiosk/plaza signs) are prohibited.
  • Any vehicle displaying signage which is not connected with the vehicular use of the vehicle is prohibited, except for written special event permits for up to 10 days, service/delivery vehicles properly parked, or limited 'For Sale' signs as described.
  • It is unlawful for any person to allow a sign or portion of a sign to exist that is dilapidated or hazardous.

Exempt Signs in Eaton

  • Address signs are exempt from permit requirements.
  • Commemorative signs are exempt from permit requirements.
  • Community event signs are exempt from permit requirements.
  • Community facility signs are exempt from permit requirements.
  • Contractor signs are exempt from permit requirements.
  • Directional on-site signs are exempt from permit requirements.
  • Flags, pennants, or insignia are exempt from permit requirements.
  • Holiday decorations are exempt from permit requirements.
  • Incidental signs are exempt from permit requirements.
  • Kiosk/plaza signs are exempt from permit requirements.
  • Political signs are exempt from permit requirements.
  • Prohibited activities signs (e.g., 'no hunting') are exempt from permit requirements.
  • Public phone signs are exempt from permit requirements.
  • Public signs (required or authorized by law) are exempt from permit requirements.
  • Real estate signs are exempt from permit requirements.
  • Religious or ideological signs are exempt from permit requirements.
  • Residential complex or subdivision identification signs are exempt from permit requirements.
  • Special signs (e.g., sandwich boards) are exempt from permit requirements.
  • Temporary signs (such as banners, pennants, etc.) are exempt from permit requirements.
  • Window signs are exempt from permit requirements.

Sign Plan & Submission Notes for Eaton

  • Special permits (variances for exceptions to size, height, location, quantity, or for special/temporary signs) require a written request and a hearing before the Town Board, with the Planning and Zoning Commission recommendation, as outlined in Section 7-10-8.
  • Signs in Planned Unit Development (PUD) zoning districts are subject to review as required in Section 7-10-8; signs reviewed in conjunction with the PUD final plan review are considered as having complied.
  • Exceptions for additional signage on properties with multiple street frontages or frontage over 150 feet may be approved as provided in Section 7-10-8.
  • If a hearing is requested (regarding sign violations or permits), the Town Board acts upon the application/request after receiving a recommendation from the Planning and Zoning Commission.

Source: municode municipal code