Sign Regulations in Meeker, Colorado

Meeker, Colorado has specific sign regulations covering 10 sign types across 6 zoning districts. Regulated sign types include Temporary signs, Applied lettering, Awning sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: March 6, 2025

Sign Regulation Overview for Meeker, Colorado

Sample Sign Requirements in Meeker

Sign TypeMax HeightMax AreaSetback
Applied letteringNo maximum heightNo maximum
Awning signRoofline of the building or structureNo maximum
Banner signRoofline of the building or structureTwenty-four (24) square feet per sign, per street frontage

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for MeekerFull Coverage

Sign Types Covered

10

  • Temporary signs
  • Applied lettering
  • Awning sign
  • Banner sign
  • +2 more types

Zoning Districts

6

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Meeker

Frequently Asked Questions

Sign height limits in Meeker vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Meeker, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Meeker, regulated sign types include Temporary signs, Applied lettering, Awning sign, Banner sign, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Meeker vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Meeker are regulated with specific requirements for brightness, animation, and message duration. Meeker has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Meeker Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Meeker, Colorado sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Meeker, Colorado Sign Rules at a Glance

Meeker, Colorado regulates 10 sign types across 6 zoning districts. Applied letterings in the TC zoning district are capped at No maximum height tall and No maximum (Sec. Table 18.4: Types of Signs by District). Most commercial signs in Meeker require a permit.

Detailed Sign Ordinance Requirements for Meeker, Colorado

Sign Rules by Zoning District in Meeker (6 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
RR, SFR, MR, MHP1
TC10Fifteen (15) feet above finished gradeFifty (50) square feet
HC10Fifteen (15) feet above finished gradeSixty (60) square feet
I10Fifteen (15) feet above finished gradeSixty (60) square feet
CF10Fifteen (15) feet above finished gradeSixty (60) square feet
General Regulations For All Zones1

Zone-by-Zone Sign Requirements in Meeker(sample of 3 of 6 zones)

TC

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Applied letteringNo maximum heightNo maximumAll applied letters are considered one (1) sign for a businessWindow surfaceUnlockTable 18.4: Types of Signs by District
Awning signRoofline of the building or structureNo maximumTwo (2) per buildingOver sidewalks, courtyards, etc.UnlockTable 18.4: Types of Signs by District
Banner signRoofline of the building or structureTwenty-four (24) square feet per sign, per street frontageOne (1) sign per street frontageMounted to a pole or buildingUnlockTable 18.4: Types of Signs by District
Freestanding signFifteen (15) feet above finished gradeForty (40) square feetOne (1) sign per street frontage or one (1) sign per subdivisionIndependent from any buildingUnlockTable 18.4: Types of Signs by District
Monument signSix (6) feetFifty (50) square feetOne (1) sign per propertyDetached sign with a proportionate baseUnlockTable 18.4: Types of Signs by District
Projecting signRoofline of the building or structureTwenty (20) square feet per signOne (1) sign per building frontageAffixed to a building or wallUnlockTable 18.4: Types of Signs by District
Suspended signRoofline of the building or structure, or the top of the parapet wallForty (40) square feet per signOne (1) sign per frontage of a building occupied by a nonresidential useSuspended from the underside of a horizontal plane surfaceUnlockTable 18.4: Types of Signs by District
Wall signRoofline of the building or structure, or the top of the parapet wallForty (40) square feet per signOne (1) sign per frontage of a building occupied by a nonresidential useParallel and attached to a wallUnlockTable 18.4: Types of Signs by District

HC

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Applied letteringNo maximum heightNo maximumAll applied letters are considered one (1) sign for a businessWindow surfaceUnlockTable 18.4: Types of Signs by District
Awning signRoofline of the building or structureNo maximumTwo (2) per buildingOver sidewalks, courtyards, etc.UnlockTable 18.4: Types of Signs by District
Banner signRoofline of the building or structureTwenty-four (24) square feet per sign, per street frontageOne (1) sign per street frontageMounted to a pole or buildingUnlockTable 18.4: Types of Signs by District
Freestanding signFifteen (15) feet above finished gradeSixty (60) square feetOne (1) sign per street frontage or one (1) sign per subdivisionIndependent from any buildingUnlockTable 18.4: Types of Signs by District
Monument signSix (6) feetFifty (50) square feetOne (1) sign per propertyDetached sign with a proportionate baseUnlockTable 18.4: Types of Signs by District
Projecting signRoofline of the building or structureTwenty (20) square feet per signOne (1) sign per building frontageAffixed to a building or wallUnlockTable 18.4: Types of Signs by District
Suspended signRoofline of the building or structure, or the top of the parapet wallSixty (60) square feet per signOne (1) sign per frontage of a building occupied by a nonresidential useSuspended from the underside of a horizontal plane surfaceUnlockTable 18.4: Types of Signs by District
Wall signRoofline of the building or structure, or the top of the parapet wallSixty (60) square feet per signOne (1) sign per frontage of a building occupied by a nonresidential useParallel and attached to a wallUnlockTable 18.4: Types of Signs by District

I

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Applied letteringNo maximum heightNo maximumAll applied letters are considered one (1) sign for a businessWindow surfaceUnlockTable 18.4: Types of Signs by District
Awning signRoofline of the building or structureNo maximumTwo (2) per buildingOver sidewalks, courtyards, etc.UnlockTable 18.4: Types of Signs by District
Banner signRoofline of the building or structureTwenty-four (24) square feet per sign, per street frontageOne (1) sign per street frontageMounted to a pole or buildingUnlockTable 18.4: Types of Signs by District
Freestanding signFifteen (15) feet above finished gradeSixty (60) square feetOne (1) sign per street frontage or one (1) sign per subdivisionIndependent from any buildingUnlockTable 18.4: Types of Signs by District
Monument signSix (6) feetFifty (50) square feetOne (1) sign per propertyDetached sign with a proportionate baseUnlockTable 18.4: Types of Signs by District
Projecting signRoofline of the building or structureTwenty (20) square feet per signOne (1) sign per building frontageAffixed to a building or wallUnlockTable 18.4: Types of Signs by District
Suspended signRoofline of the building or structure, or the top of the parapet wallSixty (60) square feet per signOne (1) sign per frontage of a building occupied by a nonresidential useSuspended from the underside of a horizontal plane surfaceUnlockTable 18.4: Types of Signs by District
Wall signRoofline of the building or structure, or the top of the parapet wallSixty (60) square feet per signOne (1) sign per frontage of a building occupied by a nonresidential useParallel and attached to a wallUnlockTable 18.4: Types of Signs by District

PermitPal covers all 6 zoning districts in Meeker — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 6 zones for Meeker — start free

Prohibited Signs in Meeker

  • It shall be unlawful to erect or maintain any sign except in conformity with the requirements of this Subsection.
  • No sign shall be erected or maintained which creates a traffic or other safety hazard.
  • No sign shall be erected or maintained which creates a public or private nuisance, or which unreasonably interferes with the reasonable enjoyment of the adjacent property by reason of unreasonable light, shade, or other effects.
  • No sign shall have more than two (2) sign faces.
  • Mounted signs shall be flush mounted against a building or wall.
  • Signs may be erected only on property for which the sign owner has a legal right to erect such sign.
  • No more than fifty percent (50%) of any sign face may be internally illuminated.

Exempt Signs in Meeker

  • Temporary signs do not require a permit.

Sign Plan & Submission Notes for Meeker

  • In any building with multiple tenants, the owner of the building shall be required to apply for and be issued a sign permit for the entire building and all the uses therein.
  • Applications for sign permits shall be on forms provided by the Town.

Source: municode municipal code