Sign Regulations in High Springs, Florida
High Springs, Florida has specific sign regulations covering 8 sign types across 12 zoning districts. Regulated sign types include Freestanding Sign - A-Frame/Temporary, Satellite Dish Antenna (Earth Station), Entrance Wall Sign (Development Identification). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for High Springs, Florida
Sample Sign Requirements in High Springs
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Building-mounted Sign | 15 ft (not applicable for signs on arterial/collector streets) | 64 sq.ft. | Not listed |
| Satellite Dish Antenna (Earth Station) | 10 ft. (ground-mounted); 7 ft. (roof, if allowed) | 10 ft. diameter | Must comply with side and rear setbacks; not in front yard. |
| Building-mounted Sign (Wall Sign, Awning, Canopy, Projecting Sign) | 15 ft (not applicable for arterial/collector frontage) | 64 sq.ft. | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
8
- Freestanding Sign - A-Frame/Temporary
- Satellite Dish Antenna (Earth Station)
- Entrance Wall Sign (Development Identification)
- Building-mounted Sign (Wall Sign, Awning, Canopy, Projecting Sign)
- +2 more types
Zoning Districts
12
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for High Springs
Other Cities in Florida
Frequently Asked Questions
In High Springs, the height limit for Building-mounted Sign (Wall Sign, Awning, Canopy, Projecting Sign) in the Commercial District (C-1, C-2, C-3, BC) is 15 ft (not applicable for arterial/collector frontage) (Sec. 7.11.02.05(1)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in High Springs require a permit. From the submission notes on this page: A mural permit application must be filed with the planning department and approved by the city commission before any mural is installed. Run a code check for an exact address to see the permit requirements for that zone.
High Springs's sign code covers 8 sign types, including Freestanding Sign - A-Frame/Temporary, Satellite Dish Antenna (Earth Station), Entrance Wall Sign (Development Identification), and Building-mounted Sign (Wall Sign, Awning, Canopy, Projecting Sign). Most commercial signs need a permit. The ordinance lists 4 exemptions. One of them: Applicants are responsible for paying all costs associated with public hearing notifications, but no general exemption from permit requirements is provided by hardship or by virtue of the mural being artwork. The full list is on this page.
This page doesn't list a single setback distance for signs in High Springs. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.
High Springs's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research High Springs Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in High Springs, Florida, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required · Get results in seconds
High Springs, Florida Sign Rules at a Glance
High Springs, Florida regulates 8 sign types across 12 zoning districts. Building-mounted Signs (Wall Sign, Awning, Canopy, Projecting Sign) in the Mixed Use District (MU) are capped at 64 sq ft (Sec. 7.11.02.05). Most commercial signs in High Springs require a permit.
Detailed Sign Ordinance Requirements for High Springs, Florida
Sign Rules by Zoning District in High Springs (12 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| General Regulations For All Zones | 3 | 15 ft (not applicable for signs on arterial/collector streets) | 64 sq.ft. | Not listed |
| Residential District (R-1, R-1A, R-2, R-3, RM, RR, RE) | 1 | 10 ft. (ground-mounted); 7 ft. (roof, if allowed) | 10 ft. diameter | Not listed |
| Commercial District (C-1, C-2, C-3, BC) | 4 | 15 ft (not applicable for arterial/collector frontage) | 64 sq.ft. | Not listed |
| Industrial District (IND) | 4 | 15 ft (except on arterial/collector frontage) | 64 sq. ft. | Not listed |
| Mixed Use District (MU) | 4 | 15 ft (except arterial/collector streets) | 64 sq. ft. | Not listed |
| Public/Semi Public District (PSP) | 4 | 15 ft (except arterial/collector streets) | 64 sq. ft. | Not listed |
| Traditional Central Business District (TCBD) | 4 | 35 ft or 2 stories (sign likely max 15') | 25,000 sq. ft. establishment (sign area max likely 64 sq. ft. as per general), see Article VIII for sign area | Not listed |
| Traditional Neighborhood Development (TND) | 4 | 15 ft (except arterial/collector frontage) | 64 sq. ft. | Not listed |
| Traditional Marketplace Development (TMD) | 4 | 15 ft (except arterial/collector streets) | 64 sq. ft. | Not listed |
| Traditional Town Development (TTD) | 4 | 15 ft (except arterial/collector streets) | 64 sq. ft. | Not listed |
| Traditional Employment Center (TEC) | 4 | 15 ft (except arterial/collector streets) | 64 sq. ft. | Not listed |
| Start free to see 1 more zone | ||||
Zone-by-Zone Sign Requirements in High Springs(sample of 3 of 12 zones)
Commercial District (C-1, C-2, C-3, BC)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Building-mounted Sign (Wall Sign, Awning, Canopy, Projecting Sign) | 15 ft (not applicable for arterial/collector frontage) | 64 sq.ft. | Not listed | Not listed | Not listed | On building face | Not listed | Unlock | Sec. 7.11.02.05(1) |
| Freestanding Sign - A-Frame/Temporary | Not listed | Not listed | Not listed | Not listed | Not listed | Arcades and covered walkways only | Not listed | Unlock | Sec. 7.11.02.05(2) |
| Entrance Wall Sign (Development Identification) | Not listed | Not listed | Not listed | Not listed | 1 per development entrance | Entrance wall; face of wall only, for development name/address | Not listed | Unlock | Sec. 7.11.02.05(3) |
| Satellite Dish Antenna (Earth Station) | 10 ft. (ground-mounted), 7 ft. (roof, if allowed) | 10 ft. diameter | Not listed | Must comply with all district setbacks. | 1 per business/occupation | Subject to district setbacks; allowed on roof (see requirements) | Not listed | Unlock | Sec. 7.09.10.03 |
Industrial District (IND)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Building-mounted Sign (Wall Sign, Awning, Canopy, Projecting Sign) | 15 ft (except on arterial/collector frontage) | 64 sq. ft. | Not listed | Not listed | Not listed | On building face | Not listed | Unlock | Sec. 7.11.02.05(1) |
| Freestanding Sign - A-Frame/Temporary | Not listed | Not listed | Not listed | Not listed | Not listed | Arcades and covered walkways only | Not listed | Unlock | Sec. 7.11.02.05(2) |
| Entrance Wall Sign (Development Identification) | Not listed | Not listed | Not listed | Not listed | 1 per development entrance | Entrance wall; face of wall only. | Not listed | Unlock | Sec. 7.11.02.05(3) |
| Satellite Dish Antenna (Earth Station) | 10 ft. (ground-mounted), 7 ft. (roof, if allowed) | 10 ft. diameter | Not listed | Must comply with all district setbacks. | 1 per business/occupation | Subject to all district setbacks; may be roof-mounted per requirements | Not listed | Unlock | Sec. 7.09.10.03 |
Mixed Use District (MU)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Building-mounted Sign (Wall Sign, Awning, Canopy, Projecting Sign) | 15 ft (except arterial/collector streets) | 64 sq. ft. | Not listed | Not listed | Not listed | On building face | Not listed | Unlock | Sec. 7.11.02.05 |
| Freestanding Sign - A-Frame/Temporary | Not listed | Not listed | Not listed | Not listed | Not listed | Arcades and covered walkways | Not listed | Unlock | Sec. 7.11.02.05(2) |
| Entrance Wall Sign (Development Identification) | Not listed | Not listed | Not listed | Not listed | 1 per entrance | At development entrance, on wall only | Not listed | Unlock | Sec. 7.11.02.05(3) |
| Satellite Dish Antenna (Earth Station) | 10 ft. (ground-mounted), 7 ft. (roof, if allowed) | 10 ft. diameter | Not listed | Must comply with all district setbacks. | 1 per business/occupation | Subject to all district setbacks, can be roof-mounted as per code | Not listed | Unlock | Sec. 7.09.10.03 |
PermitPal covers all 12 zoning districts in High Springs. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in High Springs
- No person, firm, corporation or other entity may authorize, erect, construct, maintain, move, alter, change, place, suspend, or attach any mural within the city prior to obtaining a mural permit.
- Murals may not include commercial messages. Any part of a mural that contains a commercial message is not considered a mural and must comply with applicable sign code provisions.
- Murals are only permitted in non-residential zoning districts.
- No mural may be located on more than one single facade of a building, unless specifically allowed under certain exceptions.
- A mural may not be placed on the primary façade of the structure, unless an exception is granted.
- No mural that violates federal, state, or local law may be permitted.
- No approval shall be issued for mural installation if there are outstanding code enforcement violations charged by the city on the property where the mural is to be located.
- Outstanding debts to the city must be paid in full prior to issuance of the mural permit.
- Murals shall not be painted on historically original or unpainted brick and stone surfaces of historic properties, in order to preserve the historic fabric.
- Removal or alteration of murals without proper permit is prohibited; alterations require a new mural permit.
- Failure to maintain a mural constitutes a public nuisance and may result in the city removing the mural at the owner’s expense.
Exempt Signs in High Springs
- Murals are not considered signs under the city's sign code as long as they do not contain a commercial message; if they do, applicable sign code provisions apply.
- Artists may be compensated for the completion of the mural, but no compensation may be given or received for the right to display or place the mural itself.
- Applicants are responsible for paying all costs associated with public hearing notifications, but no general exemption from permit requirements is provided by hardship or by virtue of the mural being artwork.
- Historic district murals have a specific review process, but are not generally exempted from review, just subject to additional standards.
Sign Plan & Submission Notes for High Springs
- A mural permit application must be filed with the planning department and approved by the city commission before any mural is installed.
- Murals must comply with detailed application requirements, including submission of concept drawings, materials, maintenance agreement, non-commercial use, zoning compliance, and, if applicable, compliance with historic district criteria.
- Applicants for murals in historic districts must submit to the historic preservation board for a certificate of appropriateness before review by the city commission, rather than the planning and zoning board.
- All murals must be approved as to size, durability, placement, and compliance with the code; city staff will keep an updated public map and record of all approved murals.
- To alter an existing mural, the applicant must obtain a new mural permit.
Source: municode municipal code