Questions? Call us at (262) 218-2915

Sign Regulations in Hillsboro Beach, Florida

Hillsboro Beach, Florida has specific sign regulations covering 8 sign types across 2 zoning districts. Regulated sign types include Temporary Real Estate Sign - Resale of Multi-Family Unit, Temporary Real Estate Sign - New Construction, Wall Sign (Flat/Projecting/Roof-Mounted). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Hillsboro Beach, Florida

Sample Sign Requirements in Hillsboro Beach

Sign TypeMax HeightMax AreaSetback
Temporary Real Estate Sign - Resale of Multi-Family UnitNot listed216 square inches per side (12" x 18")Not listed
Temporary Real Estate Sign - New ConstructionNot listed12 square feetNot listed
Wall Sign (Flat/Projecting/Roof-Mounted)Characters or figures not more than 24 inches highNot listedNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Hillsboro BeachFull Coverage

Sign Types Covered

8

  • Temporary Real Estate Sign - Resale of Multi-Family Unit
  • Temporary Real Estate Sign - New Construction
  • Wall Sign (Flat/Projecting/Roof-Mounted)
  • Pole/Freestanding Sign
  • +2 more types

Zoning Districts

2

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Hillsboro Beach

City WebsiteMunicipal Code3 permit application links available

Frequently Asked Questions

In Hillsboro Beach, the height limit for Pole/Freestanding Sign in the Multi-Family Residential Zoning Districts (RM-16, RM-30, RPC, PRC and CF) is 20 feet above ground. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Hillsboro Beach require a permit. From the submission notes on this page: Permission for erection of temporary builder's or promotional signs shall be issued by the Commission upon application, at the Commission's sole discretion. Run a code check for an exact address to see the permit requirements for that zone.

Hillsboro Beach's sign code covers 8 sign types, including Temporary Real Estate Sign - Resale of Multi-Family Unit, Temporary Real Estate Sign - New Construction, Wall Sign (Flat/Projecting/Roof-Mounted), and Pole/Freestanding Sign. Most commercial signs need a permit.

In Hillsboro Beach, Pole/Freestanding Sign in the Multi-Family Residential Zoning Districts (RM-16, RM-30, RPC, PRC and CF) must be set back at least 30 feet from center line of Highway A1A. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Hillsboro Beach's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.

AI-Powered Research

Ready to Research Hillsboro Beach Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Hillsboro Beach, Florida, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Hillsboro Beach, Florida Sign Rules at a Glance

Hillsboro Beach, Florida regulates 8 sign types across 2 zoning districts. Pole/Freestanding Signs in the Multi-Family Residential Zoning Districts (RM-16, RM-30, RPC, PRC and CF) are capped at 20 feet above ground and 15 square feet, set back at least 30 feet from center line of Highway A1A. Most commercial signs in Hillsboro Beach require a permit.

Detailed Sign Ordinance Requirements for Hillsboro Beach, Florida

Sign Rules by Zoning District in Hillsboro Beach (2 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Multi-Family Residential Zoning Districts (RM-16, RM-30, RPC, PRC and CF)4Characters or figures not more than 24 inches high216 square inches per side (12" x 18")Not listed
General Regulations For All Zones43 feet (to top of sign, including posts)216 square inches per side (12" x 18")Not listed

Zone-by-Zone Sign Requirements in Hillsboro Beach

Multi-Family Residential Zoning Districts (RM-16, RM-30, RPC, PRC and CF)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Real Estate Sign - Resale of Multi-Family UnitNot listed216 square inches per side (12" x 18")Not listedNot listedNo more than 1 sign per unit or per agent, whichever is lessOn property offered for resale. Not specified further.Not listedUnlockSec. 12-373(A), Sec. 12-372
Temporary Real Estate Sign - New ConstructionNot listed12 square feetNot listedNot listedNo more than 1 signOn property for new construction multi-family project.Not listedUnlockSec. 12-373(B)
Wall Sign (Flat/Projecting/Roof-Mounted)Characters or figures not more than 24 inches highNot listedNot listedNot listedNo more than 2 per property unless special permission grantedFlat against or not more than 18 inches from the outside wall or on the roof.Not listedUnlockSec. 12-377(A), Sec. 12-371, Sec. 12-377(C)
Pole/Freestanding Sign20 feet above ground15 square feetNot listedAt least 30 feet from center line of Highway A1ANo more than 2 per property unless special permission grantedNot closer than 30 feet from the center line of Highway A1ANot listedUnlockSec. 12-377(B), Sec. 12-371, Sec. 12-377(C)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary Real Estate SignNot listed216 square inches per side (12" x 18")Not listedNot listedNo more than 1 per propertyOn property for sale/lease/rental.Not listedUnlockSec. 12-372
Temporary Builder's Sign / Promotional SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlockSec. 12-374
Political Sign3 feet (to top of sign, including posts)4.8 square feet per sign on residential propertyNot listedNot within required setbacks; see aboveOne per candidate per property, two per candidate on corner lots (one per frontage)On residential property with owner/tenant consent; not within property side setback; not blocking corner visibility; not in required sight visibility triangle; not on Town property, A1A right-of-way, or beach.Not listedUnlockSec. 12-382(A)(1)-(3)
Temporary Construction Sign (Contractor Identification)Not listedNot listedNot listedNot listedOne per construction siteAt construction siteNot listedUnlockSec. 12-380

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Hillsboro Beach with a free PermitPal account.

Run a free code check

Prohibited Signs in Hillsboro Beach

  • It is unlawful to erect, install, display, paint or place outside or on the exterior of any tourist court, lodging house, rooming house, apartment house, motel or hotel any signboard, billboard, banner or any means of advertising displaying room or apartment rates.
  • It is unlawful to paint or stencil on the exterior side of such buildings any price, figure or word designating rental, price or cost of any room or apartment.
  • No neon signs shall be allowed within the town.
  • No signs shall be erected within 30 feet of the center line of Highway A1A.
  • Signs tacked, nailed or in any way attached to any trees or any other object are prohibited.
  • Any movable sign not secured or attached to the ground is prohibited.
  • No flags, pennants, banners, streamers or any other type of waving promotional advertising signs are allowed within the limits of the town.
  • No temporary contractors' or subcontractors' signs shall be permitted, except one by the building contractor for location identification only during construction.
  • Signs shall not create a traffic or fire hazard, be dangerous to the general welfare, or interfere with the free use of a highway.
  • All signs must be kept in good condition, neat appearing, and in a good state of repair.
  • Signs must be constructed and erected to withstand a wind pressure of at least 35 pounds per square feet.
  • All electric signs must be constructed of incombustible material and meet specified metal gauge and corrosion standards; all wiring must conform to town ordinances and be installed by a licensed electrician.

Sign Plan & Submission Notes for Hillsboro Beach

  • No permit for erection, construction, installation or maintenance of any sign or awning shall be issued unless the applicant first has an occupational license to engage in the business.
  • Before any person begins construction or erection of any sign within the town, a permit must be secured from the town inspector.
  • Special permission from the Commission is required for more than two signs on any property in certain districts; decision rests solely in the discretion of the Commission.
  • Permission for erection of temporary builder's or promotional signs shall be issued by the Commission upon application, at the Commission's sole discretion.

Source: municode municipal code