Sign Regulations in Hilliard, Florida
Hilliard, Florida has specific sign regulations covering 10 sign types across 3 zoning districts. Regulated sign types include For Sale/Lease/Rent Sign, Professional Nameplate, Address Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Hilliard, Florida
Sample Sign Requirements in Hilliard
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| For Sale/Lease/Rent Sign | Not listed | 6 sq ft (residential districts) | Not listed |
| Professional Nameplate | Not listed | 2 sq ft | Not listed |
| Address Sign | Not listed | 2 sq ft | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
10
- For Sale/Lease/Rent Sign
- Professional Nameplate
- Address Sign
- Nonadvertising Directional Sign
- +2 more types
Zoning Districts
3
Different zoning districts with specific sign regulations
Data Includes
- Permit requirements
- Height restrictions
- Illumination rules
Official Resources for Hilliard
Other Cities in Florida
Frequently Asked Questions
In Hilliard, the height limit for On-site Wall/Marquee Sign (permanent) in the Main Street commercial (MSC) and other zoning districts is 12 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
Most commercial signs in Hilliard require a permit. From the submission notes on this page: All signs must conform to general requirements that apply to all signs and all use districts stated in Sec. 62-418. Run a code check for an exact address to see the permit requirements for that zone.
Hilliard's sign code covers 10 sign types, including For Sale/Lease/Rent Sign, Professional Nameplate, Address Sign, and Nonadvertising Directional Sign. Most commercial signs need a permit. The ordinance lists 1 exemption. One of them: Signs erected and maintained pursuant to and in discharge of any governmental function, or required by law, ordinance, or governmental regulations, are excluded from regulation as 'signs.'. The full list is on this page.
In Hilliard, Home Occupation Sign in the Agricultural and other zoning districts must be set back at least 5 feet from street/roadway line if on post (Sec. 62-354(3)(c)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Rules in Hilliard's sign ordinance that cover digital, changing, or flashing signs: Flashing signs are prohibited. No sign shall be illuminated by or contain flashing, intermittent, rotating or moving light or lights. Run a code check for an exact address to see the full illumination rules for that zone.
Ready to Research Hilliard Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Hilliard, Florida, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Hilliard, Florida Sign Rules at a Glance
Hilliard, Florida regulates 10 sign types across 3 zoning districts. Home Occupation Signs in the Agricultural and other zoning districts are capped at 1 sq ft, set back at least 5 feet from street/roadway line if on post (Sec. 62-354(3)(c)). Most commercial signs in Hilliard require a permit.
Detailed Sign Ordinance Requirements for Hilliard, Florida
Sign Rules by Zoning District in Hilliard (3 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Agricultural, general (A-1), Residential, single-family (R-1), Residential, single-family (R-2), Residential, single-family and multiple-family (R-3), Multiple-family-mobile home district (RM-4), Residential, mobile home park/subdivision (RMH) | 8 | Not listed | 50 sq ft (nonresidential); 6 sq ft (residential) | Not listed |
| Main Street commercial (MSC), Commercial, general (C-1), Manufacturing, industrial warehousing (M-1) | 8 | 12 ft max height | 100 sq ft | Not listed |
| General Regulations For All Zones | 1 | Not listed | Not listed | Not listed |
Zone-by-Zone Sign Requirements in Hilliard
Agricultural, general (A-1), Residential, single-family (R-1), Residential, single-family (R-2), Residential, single-family and multiple-family (R-3), Multiple-family-mobile home district (RM-4), Residential, mobile home park/subdivision (RMH)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| For Sale/Lease/Rent Sign | Not listed | 6 sq ft (residential districts) | Not listed | Not listed | 1 per premises | On the premises being advertised | Not listed | Unlock | Sec. 62-419(1) |
| Professional Nameplate | Not listed | 2 sq ft | Not listed | Not listed | Not listed | On the premises | Not listed | Unlock | Sec. 62-419(2) |
| Address Sign | Not listed | 2 sq ft | Not listed | Not listed | Not listed | On the premises | Not listed | Unlock | Sec. 62-419(3) |
| Nonadvertising Directional Sign | Not listed | 2 sq ft | Not listed | Not listed | Not listed | On private property | Not listed | Unlock | Sec. 62-419(4) |
| Institutional Bulletin Board | Not listed | 15 sq ft | Not listed | Not listed | Not listed | On premises of institution (worship, library, museum, social club, etc.) | Not listed | Unlock | Sec. 62-419(5) |
| Subdivision Entrance/Identification Sign | Not listed | 40 sq ft | Not listed | Not listed | Not listed | At entrance to subdivision | Not listed | Unlock | Sec. 62-419(6) |
| Temporary Sign | Not listed | 50 sq ft (nonresidential); 6 sq ft (residential) | Not listed | See Sec. 62-423; at least 10 feet from right-of-way; additional .5 ft per sq ft above 50 sq ft | Not listed | On site of activity/construction/event | Not listed | Unlock | Sec. 62-421 |
| Home Occupation Sign | Not listed | 1 sq ft | Not listed | At least 5 feet from street/roadway line if on post | 1 per home occupation | On premises, front yard or principal building | Not listed | Unlock | Sec. 62-354(3)(c) |
Main Street commercial (MSC), Commercial, general (C-1), Manufacturing, industrial warehousing (M-1)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| For Sale/Lease/Rent Sign | Not listed | 32 sq ft (non-residential) | Not listed | Not listed | 1 per premises | On the premises being advertised | Not listed | Unlock | Sec. 62-419(1) |
| Professional Nameplate | Not listed | 2 sq ft | Not listed | Not listed | Not listed | On the premises | Not listed | Unlock | Sec. 62-419(2) |
| Address Sign | Not listed | 2 sq ft | Not listed | Not listed | Not listed | On the premises | Not listed | Unlock | Sec. 62-419(3) |
| Nonadvertising Directional Sign | Not listed | 2 sq ft | Not listed | Not listed | Not listed | On private property | Not listed | Unlock | Sec. 62-419(4) |
| Institutional Bulletin Board | Not listed | 15 sq ft | Not listed | Not listed | Not listed | On premises of institution (worship, library, museum, social club, etc.) | Not listed | Unlock | Sec. 62-419(5) |
| Subdivision Entrance/Identification Sign | Not listed | 40 sq ft | Not listed | Not listed | Not listed | At entrance to subdivision | Not listed | Unlock | Sec. 62-419(6) |
| On-site Wall/Marquee Sign (permanent) | 12 ft max height | 100 sq ft | Not listed | 10 ft min from ROW. For each sq ft > 50, add 0.5 ft to setback, up to 100 ft max setback. Must also comply with side/rear yard setbacks of district. See Sec. 62-423. | 1 per business | On-site, wall or marquee, commercial or industrial district | Not listed | Unlock | Sec. 62-420, Sec. 62-418(1), (2), (4), (10) |
| Temporary Sign | Not listed | 50 sq ft allowed for construction, event, etc. | Not listed | Same as permanent signs: 10 ft from ROW, add 0.5 ft setback per sq ft over 50 sq ft | Not listed | On site of activity/construction/event | Not listed | Unlock | Sec. 62-421 |
General Regulations For All Zones
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Sign - General Regulations | Not listed | Not listed | Not listed | No sign in public ROW. Min 10 ft from ROW for on-site signs. (Sec. 62-423) | Not listed | All signs prohibited from public right-of-way, trees, vegetation. (Sec. 62-418, 62-422, 62-423) | Not listed | Unlock | Sec. 62-418 |
Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Hilliard with a free PermitPal account.
Run a free code checkProhibited Signs in Hilliard
- Flashing signs are prohibited.
- No sign shall employ any parts or elements which revolve, rotate, whirl, or spin.
- No sign shall be illuminated by or contain flashing, intermittent, rotating or moving light or lights.
- No sign shall be illuminated by a light that is not of constant intensity.
- No sign shall be illuminated or beamed to cause glare or reflection to a public thoroughfare, highway, sidewalk, or adjacent premises, causing a nuisance or traffic hazard.
- All wiring, fittings, and materials used in the construction, connection, and operation of electrically illuminated signs must comply with the Florida Building Code.
- No sign shall be erected or maintained from the front or face of a building of more than two feet.
- No sign shall be placed on the roof of any building.
- No temporary sign shall be placed on the front or face of a building or on any premises.
- No sign erected or maintained in the window of a building and visible from any public or private street or highway shall occupy more than 20 percent of the window surface.
- No sign shall block ingress or egress through any door or window required for building access, nor obstruct a fire escape or any door or window to a fire escape.
- Should any sign be or become unsafe or be in danger of falling, the owner or person maintaining the sign shall, upon written notice from the town, repair or remove the sign immediately.
- No sign shall be placed in any public right-of-way, except publicly owned signs such as traffic control or directional signs.
- No sign shall overhang or infringe upon the right-of-way of any street, road, or public way.
- No sign or other street graphic may use the words "stop," "look," "drive-in," "danger" or similar words, phrases, symbols, or characters, nor simulate a traffic control device, nor may red, amber, or green lights be used within ten feet of a public right-of-way or 200 feet of a traffic control device.
- No sign shall be attached to a tree or any vegetation.
- No sign shall be erected or maintained that would prevent ingress and egress through any door or window required for access, nor block a fire escape.
- No sign, other than official signs, shall be posted on any public property.
- No sign shall be placed on the roof of any building.
- No sign of any classification shall be installed, erected, or attached to a building which would prevent ingress, egress, or block access to fire escapes or fire exits.
Exempt Signs in Hilliard
- Signs erected and maintained pursuant to and in discharge of any governmental function, or required by law, ordinance, or governmental regulations, are excluded from regulation as 'signs.'
Sign Plan & Submission Notes for Hilliard
- Construction requirements for all signs must comply with the Florida Building Code and the town code.
- All signs must conform to general requirements that apply to all signs and all use districts stated in Sec. 62-418.
- For every signage area computation, only advertising area is used; frames and non-advertising structural members are not included (Sec. 62-413).
- For PUD (Planned Unit Developments), a master development plan must be submitted showing the location of all uses and facilities, which may include signage as part of overall site planning, but the code does not specify a requirement for a 'master sign plan.'
- There is no explicit requirement for submission or approval of a master sign plan or sign program found in the provided ordinance text.
- Temporary signs must conform to general and setback requirements, and allowed for specified purposes and duration (Sec. 62-421).
Source: municode municipal code