Questions? Call us at (262) 218-2915

Sign Regulations in Hinesville, Georgia

Hinesville, Georgia has specific sign regulations covering 25 sign types across 15 zoning districts. Regulated sign types include Wall Sign, Freestanding Sign - Stanchion, Freestanding Sign - Monument. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: January 21, 2026

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Hinesville, Georgia

Sample Sign Requirements in Hinesville

Sign TypeMax HeightMax AreaSetback
Electronic Message SignNot listed50 sq ft OR 25% of existing allowable sign areaNot listed
Freestanding Sign - General StandardsNot listedNot listedMin 10 ft from public right-of-way; maintain clear sight triangles (streets: 25 ft x 25 ft; driveways/alleys: 15 ft x 15 ft)
Projecting Sign - General StandardsNot listedNot listedAt least 1 ft inside curb line

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for HinesvilleFull Coverage

Sign Types Covered

25

  • Wall Sign
  • Freestanding Sign - Stanchion
  • Freestanding Sign - Monument
  • Billboard
  • +2 more types

Zoning Districts

15

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Hinesville

City WebsiteMunicipal Code1 permit application link available

Frequently Asked Questions

In Hinesville, the height limit for Freestanding Sign - Stanchion in the Highway Commercial (C-3) zoning district is 20 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Hinesville require a permit. From the submission notes on this page: In Flemington’s OC-1 District, the Mayor and Council review each sign application for height, area, aesthetics, and compatibility with the building architecture. Run a code check for an exact address to see the permit requirements for that zone.

Hinesville's sign code covers 25 sign types, including Wall Sign, Freestanding Sign - Stanchion, Freestanding Sign - Monument, and Billboard. Most commercial signs need a permit. The ordinance lists 12 exemptions. One of them: Allowed without a permit in all jurisdictions: vending machine, ATM, and gasoline pump kiosk signs (integral to the equipment and ≤32 sq. ft.). The full list is on this page.

In Hinesville, Freestanding Sign - General Standards must be set back at least 10 ft from public right-of-way. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Hinesville's sign ordinance that cover digital, changing, or flashing signs: Fluctuating, animated, or motion signs (including flashing, blinking, scrolling, running lights, or color-changing effects) are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Hinesville Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Hinesville, Georgia, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Hinesville, Georgia Sign Rules at a Glance

Hinesville, Georgia regulates 25 sign types across 15 zoning districts. Common Development Entrance Signs (Permanent) are capped at 12 sq ft. Most commercial signs in Hinesville require a permit.

Detailed Sign Ordinance Requirements for Hinesville, Georgia

Sign Rules by Zoning District in Hinesville (15 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones108 ft (columns up to 8 ft allowed)Banner ≤ 60 sq ft; Quill flag ≤ 24 sq ftNot listed
Central Business (C-1), Office Institutional (OI), Downtown Development (DD)5≤12 ft≤40 sq ft per business; for 3+ businesses on multi-tenant sign: total ≤100 sq ftNot listed
General Commercial (C-2)420 ft100 sq ft per business (single-tenant); 200 sq ft total for 2 or more businesses (multi-tenant)Not listed
General Commercial (C-2) (Flemington)316 ft (Flemington-specific)100 sq ft per business (single-tenant); 200 sq ft total for 2 or more businesses (multi-tenant)Not listed
Highway Commercial (C-3)420 ft100 sq ft per business (single-tenant); 200 sq ft total for 2 or more businesses (multi-tenant)Not listed
Highway Commercial (C-3) (Flemington)416 ft (Flemington-specific)100 sq ft per business (single-tenant); 200 sq ft total for 2 or more businesses (multi-tenant)Not listed
Light Industrial (LI), Industrial (I-1)420 ft200 sq ftNot listed
Industrial (I-1) (Flemington)420 ft200 sq ftNot listed
Interstate Corridor (IC)1Interstate: ≥10 ft above highest point of pavement and ≤70 ft above centerline of interstate; Non-interstate highways: ≤32 ft above roadwayInterstate: 12 ft x 50 ft (per face); Non-interstate: ≤378 sq ft (one face); two-faced ≤600 sq ftNot listed
Interstate Corridor (IC) (Midway)2Interstate: ≥10 ft above highest point of pavement and ≤70 ft above centerline of interstate; Non-interstate highways: ≤32 ft above roadwayInterstate: 12 ft x 50 ft (per face); Non-interstate: ≤378 sq ft (one face); two-faced ≤600 sq ftNot listed
Planned Unit Development (PUD) (Flemington and Hinesville)1Same as the most analogous use districtSame as the most analogous use districtNot listed
OC-1 District (Flemington)1Subject to Mayor and Council reviewSubject to Mayor and Council review for height and sign area complianceNot listed
Downtown Redevelopment Overlay District (Hinesville)2Per underlying zoning districtPer general electronic sign rules if on allowed corridorsNot listed
Agricultural (A-1), Agricultural Residential (AR-1)18 ft32 sq ftNot listed
Agricultural Residential (AR-1), Single-family Residential-20 (R-20), Single-family Residential-12 (R-12), Single-family Residential-8 (R-8), Attached Residential (ATR), Multi-family Residential (MFR), Manufactured Home Park (MHP), Single-family Manufactured Home (SFMH)38 ft50 sq ftNot listed

Zone-by-Zone Sign Requirements in Hinesville(sample of 3 of 15 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Electronic Message SignNot listed50 sq ft OR 25% of existing allowable sign areaNot listedNot listedNot listedMay be located on stanchion or monument signs; may also be on billboards (subject to billboard rules)Not listedUnlockSec. 303-6.C(1)-(11)
Freestanding Sign - General StandardsNot listedNot listedNot listedMin 10 ft from public right-of-way; maintain clear sight triangles (streets: 25 ft x 25 ft; driveways/alleys: 15 ft x 15 ft)Not listedOutside public right-of-way; outside sight distance triangles at intersections and drivewaysNot listedUnlockSec. 303-6.D; Sec. 303-4.B(1)-(3); Sec. 303-4.A(3)
Projecting Sign - General StandardsNot listedNot listedNot listedAt least 1 ft inside curb line1 per establishmentExtends from building; must maintain required clearancesNot listedUnlockSec. 303-6.E(1)-(4)
Awning Sign - General StandardsNot listedIncluded in wall sign area allowanceNot listed≥2 ft horizontal from curb lineNot listedOn awningNot listedUnlockSec. 303-6.A(1)-(5)
Canopy Sign - General StandardsNot listed10% of largest vertical surface of canopyNot listedNot listedNot listedOn permanent roof-like structure projecting from buildingNot listedUnlockSec. 303-6.B(1)-(2)
Gas Station/Fuel Center Canopy SignNot listed9 sq ft max per side and ≤10% of fasciaNot listedNot listed1 per canopy sideOn gas station canopy fasciaNot listedUnlockSec. 303-6.F(1)-(2); Sec. 303-6.L
Common Development Entrance Sign (Permanent)8 ft (columns up to 8 ft allowed)12 sq ftNot listedOutside of public ROWMax 2 per entranceAt development entrances; outside right-of-way within easementsNot listedUnlockSec. 303-6.G; Table 303.9 (Common Development Entrance Signs)
Temporary Sign - Windblown/Banner (General)Temporary stanchion ≤ 6 ft; Quill flag pole ≤ 8 ftBanner ≤ 60 sq ft; Quill flag ≤ 24 sq ftNot listedQuill flag ≥10 ft from ROW/property lineQuill flag: 1 per business/tenant; Temporary stanchion: 1 per parcelOn-site in commercial/industrial districtsNot listedUnlockSec. 303-6.K; Sec. 303-8; Table 303.9 (Temporary Signs)

Central Business (C-1), Office Institutional (OI), Downtown Development (DD)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed10% of building front area (aggregate; max two signs)Not listedNot listedMax 2 per establishmentOn building frontNot listedUnlockTable 303.9 (Wall Signs); Sec. 303-6.H; Sec. 303-6.E; Sec. 303-6.A; Sec. 303-6.I; Sec. 303-6.J
Freestanding Sign - Stanchion≤12 ft≤40 sq ft per business; for 3+ businesses on multi-tenant sign: total ≤100 sq ftNot listed≥10 ft from ROW; maintain sight triangles1 stanchion per parcelOn parcel, outside ROWNot listedUnlockTable 303.9 (Monument and Stanchion Signs) for C-1/OI/DD; Sec. 303-6.D.1; Sec. 303-4.B
Freestanding Sign - Monument≤5 ft (incorporated columns may be up to 8 ft)Same as stanchion (≤40 sq ft per business; total ≤100 sq ft for 3+ businesses)Not listed≥10 ft from ROW; maintain sight triangles1 monument per parcelOn parcel, outside ROWNot listedUnlockTable 303.9 (Monument and Stanchion Signs) for C-1/OI/DD; Sec. 303-6.D.2; Sec. 303-4.B
Projecting SignNot listedCounts toward wall sign area cap (10% of building front)Not listed≥1 ft from curb line1 per establishmentOn building frontNot listedUnlockSec. 303-6.E; Table 303.9 (Wall Signs - DD/C-1/OI linkage)
Awning/Canopy/Mansard/Parapet SignsNot listedAwning sign area included in wall cap; Canopy ≤10% canopy surfaceNot listedNot listedCounts within wall sign max of twoOn awning/canopy/mansard/parapetNot listedUnlockSec. 303-6.A; Sec. 303-6.B; Sec. 303-6.H/I/J; Table 303.9

Highway Commercial (C-3)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed15% of building front area (aggregate)Not listedNot listedMax 4 per establishmentOn building frontNot listedUnlockTable 303.9 (Wall Signs)
Freestanding Sign - Stanchion20 ft100 sq ft per business (single-tenant); 200 sq ft total for 2 or more businesses (multi-tenant)Not listed≥10 ft from ROW; maintain sight trianglesMax 1 per primary frontage + 1 per qualifying secondary frontageOn parcel fronting primary and qualifying secondary street(s); outside ROWNot listedUnlockTable 303.9 (Monument and Stanchion Signs) for C-2/C-3; Sec. 303-6.D.1
Freestanding Sign - Monument20 ftSame as stanchion (100 sq ft single-tenant; 200 sq ft multi-tenant)Not listed≥10 ft from ROW; maintain sight trianglesMax 1 per primary frontage + 1 per qualifying secondary frontageOn parcel fronting primary/secondary street(s); outside ROWNot listedUnlockTable 303.9 (Monument and Stanchion Signs) for C-2/C-3; Sec. 303-6.D.2
BillboardInterstate: ≥10 ft above highest point of pavement and ≤70 ft above centerline of interstate; Non-interstate highways: ≤32 ft above roadwayInterstate: 12 ft x 50 ft (per face); Non-interstate: ≤378 sq ft (one face); two-faced ≤600 sq ftInterstate: ≤50 ft length (per face)≥10 ft from public ROWNot listedOnly on undeveloped property; only along interstate and state highway system; not within 10 ft of ROW; not in/over public property/easements/utility poles/natural featuresNot listedUnlockSec. 303-6.D.3(a)-(m); Table 303.9 (Billboards allowed on undeveloped properties in C-3, LI, IC, I-1)

PermitPal covers all 15 zoning districts in Hinesville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Hinesville

  • Roof signs are prohibited.
  • Vehicular signs used primarily for advertising at a fixed location are prohibited; electronic signs on vehicles are prohibited (exceptions exist for vehicles actively used in business operations, parked inconspicuously, or used for on-site construction storage with valid permits).
  • Fluctuating, animated, or motion signs (including flashing, blinking, scrolling, running lights, or color-changing effects) are prohibited.
  • Rotating or revolving signs are prohibited.
  • Signs emitting sound are prohibited.
  • Inflatable signs larger than 5 feet in height or 4 feet in width are prohibited.
  • Dilapidated or damaged signs are prohibited.
  • Signs that constitute traffic hazards are prohibited, including signs within required sight distance triangles and signs that imitate, resemble, or closely approximate official traffic signals, signs, or devices.
  • Obscene signs are prohibited (per O.C.G.A. § 16-12-80).
  • Portable signs are prohibited, including mobile signs, trailer signs, and A-frame/sandwich boards; one A-frame/sandwich board per business is allowed only if ≤4 ft in height, does not hinder sidewalks, and is removed during inclement weather and when the business is closed.
  • Private signs on public property or within public rights-of-way are prohibited.

Exempt Signs in Hinesville

  • The following are not considered signs and are not regulated: seasonal and holiday decorations; window displays of goods available within a business; address numerals; building design and color associated with an establishment that convey no message.
  • Allowed without a permit in all jurisdictions: vending machine, ATM, and gasoline pump kiosk signs (integral to the equipment and ≤32 sq. ft.).
  • Allowed without a permit in all jurisdictions: one quill flag banner per business (≤24 sq. ft., pole ≤8 ft in height, ≥10 ft from right-of-way/property line, maintained in good condition).
  • Allowed without a permit in all jurisdictions: signs attached to a vehicle or trailer used in the normal day-to-day operation of the business (vehicles primarily used for advertising are not exempt).
  • Allowed without a permit in all jurisdictions: window signs attached to or within 12 inches of the window, legible from outside, not exceeding 10% of the window area on each façade, and counted toward the building’s overall maximum sign area.
  • Allowed without a permit in all jurisdictions except Flemington and Hinesville: temporary signs on construction sites.
  • Allowed without a permit in Flemington and Hinesville only: temporary signs not included in Sec. 303-6(K).
  • Allowed without a permit in Flemington and Hinesville only: identification plates for doors not exceeding 4 in. x 18 in.
  • Allowed without a permit in Flemington and Hinesville only: alarm company signs/logos not exceeding 1 sq. ft.
  • Allowed without a permit in Flemington and Hinesville only: street address numbers (≤6 in. in height on residential properties; ≤12 in. in height on non-residential properties).
  • Allowed without a permit in Flemington and Hinesville only: directional signs (max area 4 sq. ft.; max height 2 ft.; max lettering height 6 in.; no more than 2 per street entrance; no commercial logos/messages).
  • Lighting restriction for exempt signs: except vending machines/ATMs/gas pump kiosk signs, no signs allowed without a permit may be illuminated.

Sign Plan & Submission Notes for Hinesville

  • In any master planned industrial development (LI and I-1), the types and sizes of all signs must be approved by the Planning Commission and the governing authority.
  • In Flemington’s OC-1 District, the Mayor and Council review each sign application for height, area, aesthetics, and compatibility with the building architecture.
  • Sign variances are limited to specific hardship situations; hearings are noticed using the same time frames and notice requirements as for zoning variances; variances must be the minimum relief necessary and cannot increase the number of signs.
  • Hinesville has a Citizens Sign Appeals Board for appeals of sign permit denials or revocations; the Board makes recommendations and the Mayor and City Council issue the final decision.

Source: other municipal code