Questions? Call us at (262) 218-2915

Sign Regulations in Hogansville, Georgia

Hogansville, Georgia has specific sign regulations covering 29 sign types across 8 zoning districts. Regulated sign types include Projecting Sign, Freestanding Monument Sign, Freestanding Pole Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Hogansville, Georgia

Sample Sign Requirements in Hogansville

Sign TypeMax HeightMax AreaSetback
FlagResidential: 25 feet; Non-residential: building height limit or 50 feet (whichever is less)60 square feetNot listed
Window SignNot listed20% of available window areaNot listed
Noncommercial Message Sign5 feet from ground levelNonresidential districts: 16 sq ft per lot; Residential districts: 8 sq ft per lot2 feet from right-of-way

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for HogansvilleFull Coverage

Sign Types Covered

29

  • Projecting Sign
  • Freestanding Monument Sign
  • Freestanding Pole Sign
  • Miscellaneous Freestanding Sign
  • +2 more types

Zoning Districts

8

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Hogansville

Hogansville, Georgia Sign Rules at a Glance

Hogansville, Georgia regulates 29 sign types across 8 zoning districts. Directory Signs (multi-tenant) are capped at 6 feet tall and 4 sq ft (Sec. 102-B-10-5(6)). Most commercial signs in Hogansville require a permit.

Detailed Sign Ordinance Requirements for Hogansville, Georgia

Sign Rules by Zoning District in Hogansville (8 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
General Regulations For All Zones745 inches60 square feet
ES-R, estate single-family residential district, SU-R, suburban single-family residential district, TN-R, traditional neighborhood low-density single-family and two-family residential district, CR-MR, corridor medium-density residential district, G-RL, general rural district68 feet40 sq ft
TN-MX, traditional neighborhood mixed use district515 feet200 sq ft (max)
CR-MX, corridor mixed use district, G-B, general business district, G-I, general industrial district775 feet400 sq ft per sign face (maximum 800 sq ft total for all faces)
DT-MX, downtown mixed use district512 feet50 sq ft
PUD, planned unit development zoning district overlay1Not listedNot listed
Historic district special zoning district overlay1Not listedNot listed
Downtown business special zoning district overlay2Freestanding: 6 ftFreestanding: 32 sq ft and 6 ft height; Wall: 6 sq ft; Banner: 24 sq ft; Portable (CR-MX only): 32 sq ft

Zone-by-Zone Sign Requirements in Hogansville(sample of 3 of 8 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
FlagResidential: 25 feet; Non-residential: building height limit or 50 feet (whichever is less)60 square feetNot listedNot listedResidential: one flagpole; Multi-family, institutional, commercial, industrial, mixed-use: up to 3 flagpolesOn flagpoles, vertical or mast-arm, must be on private property.UnlockSec. 102-B-10-5(2)
Window SignNot listed20% of available window areaNot listedNot listedNot listedWithin window, only nonresidential districtsUnlockSec. 102-B-10-5(4), Sec. 102-B-10-6(14)
Noncommercial Message Sign5 feet from ground levelNonresidential districts: 16 sq ft per lot; Residential districts: 8 sq ft per lotNot listed2 feet from right-of-wayNot listedMust be set back at least 2 feet from any right-of-wayUnlockSec. 102-B-10-5(5)
Directory Sign (multi-tenant)6 feet4 sq ftNot listedNot listedNot listedAt site, multi-tenant developmentsUnlockSec. 102-B-10-5(6)
Display Boards (Drive-Thru Lane)8 feet32 sq ftNot listedNot listedNot listedNext to drive-thru lanesUnlockSec. 102-B-10-5(7)
Incidental SignNot listed2 sq ftNot listedNot listedNot listedAccessory to features like gas pumpsUnlockSec. 102-B-10-5(8)
Sandwich Board/Sidewalk Sign45 inches30 inches wide x 45 inches tall (max)30 inchesNot listed1 per tenant spaceWithin TN-MX, CR-MX, DT-MX, G-B districts (on private property or in right-of-way)UnlockSec. 102-B-10-5(9)

ES-R, estate single-family residential district, SU-R, suburban single-family residential district, TN-R, traditional neighborhood low-density single-family and two-family residential district, CR-MR, corridor medium-density residential district, G-RL, general rural district

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Project Entrance Sign (Monument)8 feet40 sq ft15 feet from edge of the street, pavement or 2 feet behind the right-of-way, whichever is greater1 per entrance if double-sided; 2 per entrance if on symmetrical structures1 per entrance if double-sided, 2 per entrance if placed on symmetrical entrance structuresUnlockSec. 102-B-10-8, Sec. 102-B-10-7(6)
Monument Sign (Nonresidential Use, in lieu of Project Entrance Sign)6 feet36 sq ft (up to 25% changeable copy)15 feet from edge of the street pavement or 2 feet behind the right-of-way, whichever is greater1 per street frontage, up to 21 per street frontage, up to max 2UnlockSec. 102-B-10-8
Building Sign (Nonresidential Use, Wall/Awning/Canopy)Not listed24 sq ft per street facing wallNot listed1 per street facing wallAffixed to street facing wallUnlockSec. 102-B-10-8
Projecting Sign (Nonresidential Use)Not listed16 sq ftNot listed1 per street facing wallPer street facing wallUnlockSec. 102-B-10-8, Sec. 102-B-10-7(4), (5)
Miscellaneous Freestanding Sign (Nonresidential Use)3 feet (within setback), 6 feet (beyond setback)6 sq ft (if within setback); 6 sq ft (if beyond setback, height up to 6 ft)Not listed2 per drivewayWithin 3 feet of driveways/curb cuts (max 2 per driveway)UnlockSec. 102-B-10-8, Sec. 102-B-10-7(3)
Standard Informational SignNot specified for informational sign8 sq ft (residential)Not listed1 per lotOne per lot zoned residentialUnlockSec. 102-B-10-9

CR-MX, corridor mixed use district, G-B, general business district, G-I, general industrial district

Sign TypeMax HeightMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Monument Sign15 feet (20 feet for multiple businesses on site)150 sq ft per sign (up to 50% may be changeable copy, or, in the CR-MX, a changing sign); in multi-tenant/multi-business sites, add 25 sq ft per additional business to 200 sq ft max; If multiple businesses: height up to 20 ft15 feet from edge of pavement or 2 feet behind right-of-way (whichever is greater); 50 feet from any other freestanding sign on same side; Interstate signs also: At least 10 feet, not over 100 feet from I-85 ROW, at least 40 feet from all other property lines1 per street frontage, up to 2 per property1 per street frontage, up to a max of 2 per propertyUnlockSec. 102-B-10-11(2), Table; 102-B-10-11(8) for interstate signs
Freestanding Pole Sign15 feet (20 feet for multiple businesses on site)100 sq ft per sign (up to 50% may be changeable copy, or, in CR-MX, a changing sign)15 feet from pavement/ROW; 50 feet from other freestanding signs1 per street frontage, max 21 per street frontage, up to 2 per propertyUnlockSec. 102-B-10-11(2), Table
Special Interstate Sign (CR-MX only)75 feet400 sq ft per sign face (maximum 800 sq ft total for all faces)10-100 feet from I-85; at least 40 feet from other property lines; at least 1,000 feet from any other freestanding sign1 per eligible lotWithin 0.75 acres; within 1,000 feet of I-85 and within 1,500 feet of specified roadsUnlockSec. 102-B-10-11(8)
Building Sign (Wall/Canopy/Awning)Not listed200 sq ft (single tenant)Not listedNot listedOn building elevation visible from public or private streetUnlockSec. 102-B-10-11(4)
Projecting SignAt least 8' ground clearance16 sq ftNot listed1 per street facing storefront1 per street facing storefrontUnlockSec. 102-B-10-11(4)(b)
Gas Canopy SignNot listed20% of the area of the canopy wall (per sign)Not listed3 per canopy (one per side, max three)On surfaces of freestanding or attached gasoline or diesel fuel canopiesUnlockSec. 102-B-10-11(5)
Miscellaneous Freestanding Sign3 ft if within setback; 6 ft if beyond setback6 sq ftNot listed2 per driveway/curb cut2 per driveway/curb cut (permanently installed within 3 feet of driveways/curb cuts)UnlockSec. 102-B-10-11(7), Sec. 102-B-10-7(3)

PermitPal covers all 8 zoning districts in Hogansville. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Hogansville

  • Any sign not specifically authorized by the ordinance as a permitted sign.
  • Animated and flashing signs, excluding changing signs, that flash, blink, rotate, revolve, or have moving parts or visible bulbs, and signs containing reflective elements that sparkle in the sunlight or otherwise simulate illumination during daylight hours.
  • Dilapidated signs that are in such condition as to create a hazard, nuisance or to be unsafe or fail to comply with any provision of the building code.
  • Fringe, streamers, pennants, air or gas filled figures, search lights, beacons and other similar temporary event signs, other than as specifically authorized.
  • Obscene signs, as defined by state law (O.C.G.A. ยง 16-12-80).
  • Signs that obstruct fire escapes, windows, doors, or openings usable for fire prevention or suppression, or prevent free passage from part of a roof to any other part thereof; signs that extend above a parapet wall, are affixed to a fire escape, or interfere with any opening required for ventilation.
  • Signs that interfere with road or highway visibility, or obstruct or otherwise interfere with the orderly movement of traffic or pedestrians, or that pose a hazard to traffic or pedestrians due to structural deficiencies.
  • Portable signs except as specifically authorized.
  • Private signs placed on public property, including public rights-of-way, except as authorized by the governmental body, agency or public authority having jurisdiction over such property.
  • Roof signs, except on the face of a parapet wall as long as the sign does not extend above the top of the parapet wall.
  • Snipe signs.
  • Signs emitting sound, smoke, vapor, or odors that can be detected on a traveled road or highway.
  • Signs advertising illegal activity.
  • Signs imitating public warning or traffic devices (including lights resembling traffic signals, signs using the words 'stop', 'go', 'slow', etc., or red, green, and yellow illuminated signs within 300 feet of any traffic light).
  • Window signs in dwellings and uses in all zoning districts.
  • Individual or aggregate window signs exceeding 20 percent of the window area per building elevation for all other districts and uses.
  • No sign shall obstruct any fire escape, window, door, or opening usable for fire prevention or suppression, prevent free passage from roof to roof, or vent openings.
  • No sign shall extend above a parapet wall, or pose a hazard to traffic or pedestrians due to structural deficiencies.
  • No message may be displayed on any portion of the structural supports of any sign.
  • In ES-R, SU-R, TN-R, CR-MR, and G-RL districts, internally illuminated signs are not permitted.
  • In the DT-MX district: portable signs are prohibited, roof signs are prohibited, and no advertising device or displays (e.g., pennants, banners, balloons, flags) shall extend above the roof line of any building.

Exempt Signs in Hogansville

  • Official signs placed by or at the direction of a governmental body, agency, board of education, public utility, or public authority pursuant to law (O.C.G.A. ยง 32-6-50 et seq.) or any other law.
  • Flags displayed on flagpoles subject to restrictions on pole height, area, number of flagpoles, and maintenance; no maximum flag size/number or limitations on designated holidays.
  • Street address numerals not exceeding ten inches in height.
  • Window signs in nonresidential districts, provided they do not exceed 20 percent of available window area.
  • Noncommercial message signs designed for temporary display and not permanently affixed, not exceeding aggregate sign area of 16 square feet per lot in nonresidential districts and eight square feet per lot in residential districts, with height and setback requirements.
  • Directory signs for multi-tenant developments, up to four square feet each and six feet in height.
  • Display boards next to drive-thru lanes, not exceeding eight feet in height or 32 square feet in area.
  • Incidental signs as defined in the ordinance, no more than two square feet (e.g. signs on gas pumps).
  • Sidewalk and sandwich board signs in TN-MX, CR-MX, DT-MX, and G-B districts (one per tenant space, size, location, and placement limited as specified).

Sign Plan & Submission Notes for Hogansville

  • For a free-standing sign permit, a site plan drawn to scale must be submitted showing location of the proposed sign in relation to property and right-of-way lines, acreage, driveways, parking, easements, and building locations.
  • For building signs, a to-scale drawing or photo-simulation of the building face showing placement of the sign, wall dimensions, sign dimensions, and height from ground level is required with the application.
  • Construction and/or fabrication details, including certification of conformance with structural and wind-load standards by a qualified structural engineer or using standard drawings, must be included if applicable.
  • For PUD (Planned Unit Development) overlay districts, the site plan must include, at a minimum: analysis of existing site conditions, master plan with regulations/calculations (including signage as per architectural design), landscape plan, architectural plans (showing proposed design criteria and including sign details), and other required information.
  • Design standards for certain sign types (e.g., monument, project entrance) require architectural integration with principal buildings per site/building plans.
  • Murals require a sign permit but no sign permit fee.
  • Application or review of variances and special uses (e.g., for sign height, style, or placement deviations) require compliance with city variance/special use procedures, including public meetings.

Source: municode municipal code

Frequently Asked Questions

In Hogansville, the height limit for Monument Sign (Nonresidential Use, in lieu of Project Entrance Sign) in the ES-R and other zoning districts is 6 feet (Sec. 102-B-10-8). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Hogansville require a permit. From the submission notes on this page: For a free-standing sign permit, a site plan drawn to scale must be submitted showing location of the proposed sign in relation to property and right-of-way lines, acreage, driveways, parking, easements, and building locations. Run a code check for an exact address to see the permit requirements for that zone.

Hogansville's sign code covers 29 sign types, including Projecting Sign, Freestanding Monument Sign, Freestanding Pole Sign, and Miscellaneous Freestanding Sign. Most commercial signs need a permit. The ordinance lists 9 exemptions. One of them: Street address numerals not exceeding ten inches in height. The full list is on this page.

In Hogansville, Freestanding Pole Sign in the CR-MX and other zoning districts must be set back 15 feet from pavement/right-of-way. The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Hogansville's sign ordinance that cover digital, changing, or flashing signs: Animated and flashing signs, excluding changing signs, that flash, blink, rotate, revolve, or have moving parts or visible bulbs, and signs containing reflective elements that sparkle in the sunlight or otherwise simulate illumination during daylight hours. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Hogansville Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Hogansville, Georgia, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required ยท Get results in seconds