Sign Regulations in Homer, Georgia
Homer, Georgia has specific sign regulations covering 40 sign types across 5 zoning districts. Regulated sign types include Accessory Ground Sign (Dwelling), Accessory Ground Sign (Nonresidential or Permitted Principal Use), Wall Sign (Nonresidential Permitted Principal Use). Height restrictions apply. Use PermitPal to get instant access to the complete regulations.
Data last verified: May 8, 2025
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
Sign Regulation Overview for Homer, Georgia
Sample Sign Requirements in Homer
| Sign Type | Max Height | Max Area | Setback |
|---|---|---|---|
| Principal Use Ground Sign (Nonresidential Principal Permitted Use) | Not listed | 16 sq ft | Not listed |
| Accessory Ground Sign (Dwelling) | Not listed | 4 sq ft | Not listed |
| Accessory Ground Sign (Nonresidential or Permitted Principal Use) | Not listed | 4 sq ft | Not listed |
* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.
Sign Types Covered
40
- Accessory Ground Sign (Dwelling)
- Accessory Ground Sign (Nonresidential or Permitted Principal Use)
- Wall Sign (Nonresidential Permitted Principal Use)
- Temporary Ground Sign (For Sale, Rent, Lease, or Construction)
- +2 more types
Zoning Districts
5
Different zoning districts with specific sign regulations
Data Includes
- Height restrictions
- Illumination rules
Official Resources for Homer
Other Cities in Georgia
Frequently Asked Questions
In Homer, the height limit for Principal Use Ground Sign (Local Road) (CB) in the Commercial Zoning Districts (C District, CB District, HB District) is 10 ft. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.
We haven't published Homer's application steps on this page yet. Run a code check for an exact address to see the permit requirements for that zone.
Homer's sign code covers 40 sign types, including Accessory Ground Sign (Dwelling), Accessory Ground Sign (Nonresidential or Permitted Principal Use), Wall Sign (Nonresidential Permitted Principal Use), and Temporary Ground Sign (For Sale, Rent, Lease, or Construction). The ordinance lists 3 exemptions. One of them: The maximum height requirement for ground signs does not apply to subdivision identification monuments, which shall not exceed eight feet in height. The full list is on this page.
In Homer, Temporary Ground Sign (For Sale, Rent, Lease, or Construction) in the Residential Zoning Districts (R-1 District, R-2 District) must be set back at least 15 ft from road right-of-way. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.
Homer's sign code includes illumination rules, but this page doesn't show the rules for digital or LED signs. Run a code check for an exact address to see them.
Ready to Research Homer Sign Permits?
Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Homer, Georgia, with citations from the municipal code.
Need the sign code for this address?
PermitPal is an independent research tool for sign companies. We are not the city's permit office.
No credit card required ยท Get results in seconds
Homer, Georgia Sign Rules at a Glance
Homer, Georgia regulates 40 sign types across 5 zoning districts. Multi-tenant Ground Signs (Local Road) in the Industrial Zoning Districts (M District) are capped at 10 ft tall and 64 sq ft.
Detailed Sign Ordinance Requirements for Homer, Georgia
Sign Rules by Zoning District in Homer (5 zones)
| Zoning District | Sign Types Regulated | Max Height | Max Area | Permit Required |
|---|---|---|---|---|
| Agricultural Zoning District (A District) | 6 | Not to exceed height of building or structure | 16 sq ft | Not listed |
| Residential Zoning Districts (R-1 District, R-2 District) | 11 | Not to exceed height of building or structure | Up to 50% of window area | Not listed |
| Commercial Zoning Districts (C District, CB District, HB District) | 20 | 10 ft | 96 sq ft | Not listed |
| Industrial Zoning Districts (M District) | 17 | 10 ft | 96 sq ft | Not listed |
| General Regulations For All Zones | 5 | 10 ft | Not listed | Not listed |
Zone-by-Zone Sign Requirements in Homer(sample of 3 of 5 zones)
Residential Zoning Districts (R-1 District, R-2 District)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Principal Use Ground Sign (Nonresidential Principal Permitted Use) (R-1) | Not listed | 12 sq ft | Not listed | Not listed | 1 per road frontage | Per road frontage | Not listed | Unlock | Sec. 28-112, Table 2; Sec. 28-110(a) |
| Principal Use Ground Sign (Nonresidential Principal Permitted Use) (R-2) | Not listed | 32 sq ft | Not listed | Not listed | 1 per road frontage | Per road frontage | Not listed | Unlock | Sec. 28-112, Table 2; Sec. 28-110(a) |
| Accessory Ground Sign (Dwelling) | Not listed | 4 sq ft | Not listed | Not listed | 1 per road frontage | Per road frontage | Not listed | Unlock | Sec. 28-112, Table 2; Sec. 28-110(a) |
| Accessory Ground Sign (Nonresidential or Permitted Principal Use) | Not listed | 4 sq ft | Not listed | Not listed | 2 per lot | Per lot | Not listed | Unlock | Sec. 28-112, Table 2; Sec. 28-110(a) |
| Wall Sign (Dwelling) (R-2 only) | Not to exceed height of building or structure | 2 sq ft | Not listed | Not listed | Not listed | Not listed | Not listed | Unlock | Sec. 28-112, Table 2; Sec. 28-105; Sec. 28-110(a) |
| Wall Sign (Nonresidential Permitted Principal Use) | Not to exceed height of building or structure | 4 sq ft | Not listed | Not listed | Not listed | On building | Not listed | Unlock | Sec. 28-112, Table 2; Sec. 28-105; Sec. 28-110(a) |
| Temporary Ground Sign (For Sale, Rent, Lease, or Construction) | Not listed | 4 sq ft | Not listed | No closer than 15 ft from road right-of-way (Sec. 28-106) | 1 per road frontage | Per road frontage | Not listed | Unlock | Sec. 28-112, Table 2; Sec. 28-110(a) |
| Subdivision Ground Sign (2 per entrance, R-2 Only) | Not listed | 32 sq ft | Not listed | Not listed | 2 per entrance | Entrance to subdivision | Not listed | Unlock | Sec. 28-112, Table 2; Sec. 28-110(a) |
Commercial Zoning Districts (C District, CB District, HB District)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Principal Use Ground Sign (Local Road) (CB) | 10 ft | 32 sq ft | Not listed | Not listed | 1 per road frontage | Per road frontage, on local road | Not listed | Unlock | Sec. 28-112, Table 3; Sec. 28-103, 104, 110 |
| Principal Use Ground Sign (2- or 3-lane State Highway) (CB) | 10 ft | 32 sq ft | Not listed | Not listed | 1 per road frontage | Per road frontage, on 2- or 3-lane state highway | Not listed | Unlock | Sec. 28-112, Table 3; Sec. 28-103, 104, 110 |
| Principal Use Ground Sign (4-lane State Highway or Interstate) (CB) | 10 ft | 48 sq ft | Not listed | Not listed | 1 per road frontage | Per road frontage, on 4-lane state highway or interstate | Not listed | Unlock | Sec. 28-112, Table 3; Sec. 28-103, 104, 110 |
| Principal Use Ground Sign (Local Road) (HB) | 10 ft | 48 sq ft | Not listed | Not listed | 1 per road frontage | Per road frontage, on local road | Not listed | Unlock | Sec. 28-112, Table 3; Sec. 28-103, 104, 110 |
| Principal Use Ground Sign (2- or 3-lane State Highway) (HB) | 10 ft | 64 sq ft | Not listed | Not listed | 1 per road frontage | Per road frontage, on 2- or 3-lane state highway | Not listed | Unlock | Sec. 28-112, Table 3; Sec. 28-103, 104, 110 |
| Principal Use Ground Sign (4-lane State Highway or Interstate) (HB) | 10 ft | 96 sq ft | Not listed | Not listed | 1 per road frontage | Per road frontage, on 4-lane state highway or interstate | Not listed | Unlock | Sec. 28-112, Table 3 |
| Temporary Ground Sign (Local Road) | Not listed | CB: 12 sq ft; HB: 16 sq ft | Not listed | No closer than 15 ft to right-of-way (Sec. 28-106) | 1 per road frontage | Per road frontage, local road; for sale, rent, lease, or under construction | Not listed | Unlock | Sec. 28-112, Table 3 |
| Temporary Ground Sign (2- or 3-lane State Highway) | Not listed | CB: 16 sq ft; HB: 24 sq ft | Not listed | No closer than 15 ft to right-of-way (Sec. 28-106) | 1 per road frontage | Per road frontage, 2- or 3-lane state highway; for sale, rent, lease, or under construction | Not listed | Unlock | Sec. 28-112, Table 3 |
Industrial Zoning Districts (M District)
| Sign Type | Max Height | Max Area | Max Width | Setback | Signs Allowed | Location | Permit Required | Premium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account) | Ordinance Citation |
|---|---|---|---|---|---|---|---|---|---|
| Principal Use Ground Sign (Local Road) | 10 ft | 64 sq ft | Not listed | Not listed | 1 per road frontage | Per road frontage, local road | Not listed | Unlock | Sec. 28-112, Table 3; Sec. 28-103, 104, 110 |
| Principal Use Ground Sign (2- or 3-lane State Highway) | 10 ft | 72 sq ft | Not listed | Not listed | 1 per road frontage | Per road frontage, 2- or 3-lane state highway | Not listed | Unlock | Sec. 28-112, Table 3; Sec. 28-103, 104, 110 |
| Principal Use Ground Sign (4-lane State Highway or Interstate) | 10 ft | 96 sq ft | Not listed | Not listed | 1 per road frontage | Per road frontage, 4-lane state highway or interstate | Not listed | Unlock | Sec. 28-112, Table 3; Sec. 28-103, 104, 110 |
| Temporary Ground Sign (Local Road) | Not listed | 16 sq ft | Not listed | No closer than 15 ft to right-of-way (Sec. 28-106) | 1 per road frontage | Per road frontage, for sale, rent, lease, or construction | Not listed | Unlock | Sec. 28-112, Table 3 |
| Temporary Ground Sign (2- or 3-lane State Highway) | Not listed | 24 sq ft | Not listed | No closer than 15 ft to right-of-way (Sec. 28-106) | 1 per road frontage | Per road frontage, for sale, rent, lease, or construction | Not listed | Unlock | Sec. 28-112, Table 3 |
| Temporary Ground Sign (4-lane State Highway or Interstate) | Not listed | 36 sq ft | Not listed | No closer than 15 ft to right-of-way (Sec. 28-106) | 1 per road frontage | Per road frontage, for sale, rent, lease, or construction | Not listed | Unlock | Sec. 28-112, Table 3 |
| Multi-tenant Ground Sign (Local Road) | 10 ft | 64 sq ft | Not listed | Not listed | 1 per frontage | Per frontage, local road, multiple nonresidential/permitted uses | Not listed | Unlock | Sec. 28-112, Table 3; Sec. 28-103 |
| Multi-tenant Ground Sign (2- or 3-lane State Highway) | 10 ft | 72 sq ft | Not listed | Not listed | 1 per frontage | Per frontage, 2- or 3-lane state highway | Not listed | Unlock | Sec. 28-112, Table 3; Sec. 28-103 |
PermitPal covers all 5 zoning districts in Homer. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.
Run a free code checkProhibited Signs in Homer
- No wall sign shall exceed the height of the building or structure on which it is placed.
- A property shall be limited to only one sign of the type permitted.
- No sign shall be erected to exceed the maximum number of signs specified in this chapter.
- No sign shall be erected to exceed the maximum area of a sign as specified in Tables 1, 2, and 3.
- When this chapter permits one sign for each road frontage, the sign area allotted to one road frontage shall not be transferred to another road frontage.
- Signs in residential zoning districts shall not be internally illuminated.
- Except in highway business district, community business district, and restricted industrial district zoning districts, awnings may be illuminated only with direct lighting mounted on the surface of the ground, and not with any form of backlighting or internal illumination.
- Externally illuminated signs shall be lighted by a white, steady stationary light of reasonable intensity shielded and directed solely at the sign, so as not to cause glare or spill light into the road right-of-way or up into the sky.
- All illuminated signs shall conform to all applicable electrical codes.
- Pennants, streamers, and other wind-blown devices shall not be permitted as part of a special event sign permit.
Exempt Signs in Homer
- There is no established minimum required setback for signs, except that temporary signs shall be erected no closer than 15 feet from a city, county, state, or federal road right-of-way.
- The maximum height requirement for ground signs does not apply to subdivision identification monuments, which shall not exceed eight feet in height.
- For properties situated below road grade, ground sign height may increase by up to ten feet above the grade of the road to which said sign is directed if the maximum height permitted would prevent adequate visibility.
Source: municode municipal code