Sign Regulations in Prairie Village, Kansas

Prairie Village, Kansas has specific sign regulations covering 13 sign types across 9 zoning districts. Regulated sign types include Wall Sign, Monument Sign, Temporary Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: May 8, 2025

Sign Regulation Overview for Prairie Village, Kansas

Sample Sign Requirements in Prairie Village

Sign TypeMax HeightMax AreaSetback
Property Identification Signs - Building Name Plate (Exempt)Up to 3 square feet (except engraved stone/ornamental integrated with permanence of building may be up to 24 square feet when approved by the planning commission).
Temporary Signs - Zone-Allowed Temporary Signs (Exempt)5 feet high maximum, or no higher than 20 feet or top of the roof, whichever is less if mounted on a building.Within zoning district tables for temporary sign allowance (see 19.48.040/19.48.050; also subject to 19.48.070(c) limits).
Accessory Signs for Non-Residential Uses / Multi-Family Complexes (Exempt)No more than 6 feet high (ground or building mounted).No more than 20 sq ft total per site, or 30 sq ft per acre, whichever is greater; no single sign more than 10 sq ft.

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Prairie VillageFull Coverage

Sign Types Covered

13

  • Wall Sign
  • Monument Sign
  • Temporary Sign
  • Pedestrian Sign - Wall/Canopy/Awning Signs
  • +2 more types

Zoning Districts

9

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Prairie Village

City WebsiteMunicipal Code2 permit application links available

Frequently Asked Questions

Sign height limits in Prairie Village vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Prairie Village, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Prairie Village, regulated sign types include Wall Sign, Monument Sign, Temporary Sign, Pedestrian Sign - Wall/Canopy/Awning Signs, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Prairie Village vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Prairie Village are regulated with specific requirements for brightness, animation, and message duration. Prairie Village has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Prairie Village Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Prairie Village, Kansas sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Prairie Village, Kansas Sign Rules at a Glance

Prairie Village, Kansas regulates 13 sign types across 9 zoning districts. Temporary Signs - Zone-Allowed Temporary Signs (Exempt)s in the General Regulations For All Zones zoning district are capped at 5 feet high maximum, or no higher than 20 feet or top of the roof, whichever is less if mounted on a building. tall and Within zoning district tables for temporary sign allowance (see 19.48.040/19.48.050; also subject to 19.48.070(c) limits). (Sec. 19.48.020(e); 19.48.070(c)). Most commercial signs in Prairie Village require a permit.

Detailed Sign Ordinance Requirements for Prairie Village, Kansas

Sign Rules by Zoning District in Prairie Village (9 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones7No more than 6 feet high (ground or building mounted).No more than 20 sq ft total per site, or 30 sq ft per acre, whichever is greater; no single sign more than 10 sq ft.
R-1A, R-1B, R-2, R-3, R-445 feet high maximum.32 sq ft total sign allowance per residential district; 16 sq ft per sign max.
Neighborhood Conservation Overlay45 feet high maximum.32 sq ft total sign allowance; 16 sq ft per sign max.
CP-055 feet high maximum (gas station exception uses same height limit in provided table text).48 sq ft total sign allowance; 16 sq ft per sign max.
CP-155 feet high maximum.48 sq ft total sign allowance; 16 sq ft per sign max.
CP-255 feet high maximum.48 sq ft total sign allowance; 16 sq ft per sign max.
C-O / C-1 / C-255 feet high maximum.48 sq ft total sign allowance; 16 sq ft per sign max.
SUP55 feet high maximum.48 sq ft total sign allowance; 16 sq ft per sign max.
RP-1 / RP-2 / RP-3 / RP-445 feet high maximum.32 sq ft total sign allowance; 16 sq ft per sign max.

Zone-by-Zone Sign Requirements in Prairie Village(sample of 3 of 9 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
All Signs (General Requirements)Must be designed, constructed, located and maintained to comply with all other building codes; must not be placed in any sight triangle applicable to public streets, internal access streets, or driveway access points using the sight distance provisions of Article 13-2A of the City Code; any sign projecting over a walkway or other active area in front of a building or other area where people may walk must maintain at least 7 feet 6 inches vertical clearance.UnlockPrairie Village KS Code, Ch. 19.48, §§ 19.48.010, 19.48.060(a)–(c)
Property Identification Signs - Building Name Plate (Exempt)Up to 3 square feet (except engraved stone/ornamental integrated with permanence of building may be up to 24 square feet when approved by the planning commission).Name plate sign on each building.Unlock19.48.020(a)(2)
Window Signs (Exempt)Interior of first floor windows (non-residential districts only).Unlock19.48.020(d)
Temporary Signs - Zone-Allowed Temporary Signs (Exempt)5 feet high maximum, or no higher than 20 feet or top of the roof, whichever is less if mounted on a building.Within zoning district tables for temporary sign allowance (see 19.48.040/19.48.050; also subject to 19.48.070(c) limits).Placed on site with property owner permission; location varies by temporary sign rules.Unlock19.48.020(e); 19.48.070(c)
Accessory Signs for Non-Residential Uses / Multi-Family Complexes (Exempt)No more than 6 feet high (ground or building mounted).No more than 20 sq ft total per site, or 30 sq ft per acre, whichever is greater; no single sign more than 10 sq ft.Setback at least 20 feet from all property lines.Unlock19.48.020(f)
Sale or Lease Signs (Exempt)Ground mounted: no more than 5 feet high; building mounted: no higher than 20 feet or the top of the building, whichever is less.Residential lots: no more than 12 sq ft for residential lots one acre or less; Non-residential property or residential property on larger than one acre: no more than 20 sq ft.On the lot/building being offered for sale/lease.Unlock19.48.020(h)
Interior Signs (Exempt)Interior only; not visible from specified public/adjacent viewpoints.Unlock19.48.020(i)

CP-0

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall SignMaximum 5% of facade total allowance, but no more than 50 sq ft per sign.Wall sign on principal facade(s) as allowed wall signs.Unlock19.48.050; 19.48.070(b); 19.48.060; 19.48.010
Monument Sign5 feet high maximum (gas station exception uses same height limit in provided table text).20 sq ft maximum (gas stations: up to 85 sq ft if at least 50 feet from any residential property).Setback at least 3 feet from all property lines and at least 12 feet from a street, whichever is greater; placed within landscape area at least 3 feet in all directions from base or in large landscaped yard.Unlock19.48.050; 19.48.070(a); 19.48.060
Temporary Sign5 ft maximum; or no higher than 20 ft or top of roof, whichever is less if mounted on a building.48 sq ft total sign allowance; 16 sq ft per sign max.On the property with property owner permission; for non-rigid banners set back at least 20 feet from pavement edge unless securely attached to a building/structure.Unlock19.48.050; 19.48.070(c); 19.48.020(e); 19.48.060
Pedestrian Sign - Wall/Canopy/Awning Signs6 sq ft maximum.Mounted directly on surface of wall, awning or canopy; if hanging below, must have at least 7 feet 6 inches clear from sidewalk below the sign.Unlock19.48.050 (Pedestrian Signs - Wall, Canopy or Awning Signs); 19.48.060(a)
Pedestrian Sign - Entrance Signs8 sq ft maximum.Mounted flush to the wall; if projecting, may project up to 4 feet off the wall but must be at least 7 ft 6 in clear from the sidewalk below the sign.Unlock19.48.050 (Entrance Signs); 19.48.060(a)

CP-1

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Wall SignMaximum 5% of facade total allowance, but no more than 50 sq ft per sign.Wall sign on principal facade(s).Unlock19.48.050; 19.48.070(b); 19.48.060; 19.48.010
Monument Sign5 feet high maximum.20 sq ft maximum (gas stations: up to 85 sq ft if at least 50 feet from any residential property).Setback at least 3 feet from all property lines and at least 12 feet from a street, whichever is greater; monument sign placed within landscape area at least 3 feet in all directions from base or in large landscaped yard.Unlock19.48.050; 19.48.070(a)
Temporary Sign5 ft maximum; or no higher than 20 ft or top of roof, whichever is less if mounted on a building.48 sq ft total sign allowance; 16 sq ft per sign max.On the property with property owner permission; must meet additional temporary sign construction/anchoring/setback rules.Unlock19.48.050; 19.48.070(c); 19.48.020(e)
Pedestrian Sign - Wall/Canopy/Awning Signs6 sq ft maximum.Mounted directly on surface of wall, awning or canopy; if hanging below, at least 7 ft 6 in clear from sidewalk below.Unlock19.48.050
Pedestrian Sign - Entrance Signs8 sq ft maximum.Flush to wall; projecting up to 4 feet off wall allowed if at least 7 ft 6 in clear from sidewalk below.Unlock19.48.050

PermitPal covers all 9 zoning districts in Prairie Village — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 9 zones for Prairie Village — start free

Prohibited Signs in Prairie Village

  • No sign shall imitate or resemble government signs for traffic direction or any other public safety symbol.
  • No sign shall be placed in any sight triangle applicable to public streets, internal access streets, or driveway access points using the sight distance provisions of article 13-2A of the City Code.
  • Any sign projecting over a walkway or other active area in front of a building or other area where people may walk shall maintain at least seven feet six inches vertical clearance.
  • All signs and any surrounding grounds or landscape shall be maintained in good condition, free of debris, weeds, disrepair, or other unsightly conditions.
  • No sign shall be placed on any vehicle or trailer when such vehicle or trailer is placed or parked visible from the right-of-way, and the primary purpose of the sign is to deviate from the standards or criteria of this chapter.
  • No sign shall be attached to any public utility pole or installed within the right-of-way of a public road or street, except as permitted by the public authority or where specifically exempt from the right-of-way prohibition by this chapter.
  • No sign shall include balloons, streamers, pennants, or other air-activated elements and animated elements, whether animated by mechanical, electrical, or environmental means, except as authorized through any temporary use or special event permit.
  • No sign shall have any electronic message, video display, or other digital display, except as the planning commission may approve through the site plan review (time and temperature displays; digital display of prices for gas station monument signs; and any impacts considered).
  • Obscene signs are prohibited.
  • Any sign with a business message shall be located on the site of the business activity.
  • In general, any direct source of light shall not be visible from the public street or adjacent residential property.
  • The light from an illuminated sign shall not flash or oscillate, or create any negative impact on adjacent property in direct line-of-sight to the sign.
  • Exposed incandescent, neon, or other tube lighting shall be limited to window signs mounted to the inside of the building, or as an accent of less than ten percent of the sign area of other signs.
  • High pressure sodium, low-pressure sodium, and fluorescent lighting are prohibited.
  • Any illumination shall be designed to eliminate negative impacts on surrounding rights-of-way and properties.
  • All signs shall be designed, constructed, located and maintained in a manner that is compliant with all other building codes, and in no way presents any potential risk to public safety in the judgment of the Building Official.

Exempt Signs in Prairie Village

  • Property identification signs indicating the property address or building identification (subject to specified address sign and building name plate size/placement limits, including planning commission approval for certain ornamental permanent name plates).
  • Public safety, traffic control, or public information signs designed and located according to uniform traffic control device standards, required by the City's Building or Fire Code, or otherwise required to support an official action or legal obligation of a federal, state, or local government.
  • Up to three non-commercial flags per lot (with mounting, area, and zoning-based limits).
  • Window signs mounted to the interior of any first floor windows in non-residential districts, subject to limits on sign area as a percentage of first-floor window area and maintaining at least 50% of the window area clear.
  • Temporary signs that are within the allowances specified for the zoning district in Tables 19.48-2 and 19.48-3 and section 19.48.070C (permit-exempt if within those allowances).
  • Accessory minor signs for non-residential uses or multi-family complexes intended for messages to guests/patrons/users (limited by total sign allowance, number of signs, per-sign size, height, setback from property lines, and prohibited if signs are grouped/arranged to have the effect of a larger sign or to convey messages to the general public).
  • Construction signs for temporary non-residential or multi-family construction projects limited by total sign allowance per public street frontage, number of signs per street frontage, mounting limits/height, and duration limited to the period of an associated valid permit (with additional requirement that residential construction signs in residential zoning districts meet applicable temporary sign standards).
  • Sale or lease signs for property offered for sale or lease (one sign per lot or building, limited by size/height and limited to the active marketing/contract period).
  • Interior signs not visible from the right-of-way, perimeter of the property, adjacent property, or publicly accessible common/private spaces intended as an extension of public streets/open spaces (exempt from permits and standards in this chapter, except those applicable by building codes or construction standards).
  • Ordinary maintenance, care, or repair of existing signs that does not alter the essential construction elements of an existing sign (permit for zoning/design standards not required), though any associated electrical or construction work may require permitting under building codes.
  • Property Identification Signs - Address Signs (Exempt from Sign Permit Process)
  • Public Safety/Traffic Control/Public Information Signs (Exempt)
  • Flags (Exempt)
  • Construction Signs (Exempt, with Limits)

Source: municode municipal code