Questions? Call us at (262) 218-2915

Sign Regulations in Holley, New York

Holley, New York has specific sign regulations covering 20 sign types across 3 zoning districts. Regulated sign types include Wall Sign, Directory Sign (Industrial Park Entrance), Freestanding Sign (Setback > 200 ft). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Holley, New York

Sample Sign Requirements in Holley

Sign TypeMax HeightMax AreaSetback
Wall SignNot listed100 sq ftLocation discretion of Planning Board
Directory Sign (Industrial Park Entrance)8 ft64 sq ftNot listed
Freestanding Sign (Setback > 200 ft)Not listed300 sq ft> 200 feet from public road

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for HolleyFull Coverage

Sign Types Covered

20

  • Wall Sign
  • Directory Sign (Industrial Park Entrance)
  • Freestanding Sign (Setback > 200 ft)
  • Wall Sign (Frontage Formula)
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Holley

Municipal Code1 permit application link available

Holley, New York Sign Rules at a Glance

Holley, New York regulates 20 sign types across 3 zoning districts. Directory Signs (Industrial Park Entrance) in the Light Industrial District (LI) are capped at 8 ft tall, 64 sq ft, and 8 ft wide (Sec. 265-23C). Most commercial signs in Holley require a permit.

Detailed Sign Ordinance Requirements for Holley, New York

Sign Rules by Zoning District in Holley (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax Area
Light Industrial District (LI)28 ft100 sq ft
C-1 District2Not listed300 sq ft
General Regulations For All Zones1642 in32 sq ft

Zone-by-Zone Sign Requirements in Holley

Light Industrial District (LI)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall SignNot listed100 sq ftNot listedLocation discretion of Planning Board1 per business or industrial lotFlat against the building; exact location subject to Planning Board reviewUnlock§265-23A
Directory Sign (Industrial Park Entrance)8 ft64 sq ft8 ftNot listed1 per entranceAt the entrance of any Light Industrial ParkUnlock§265-23C

C-1 District

Sign TypeMax AreaSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Setback > 200 ft)300 sq ft> 200 feet from public road1 per parcelOn commercial property with setback greater than 200 feet from public roadUnlock§265-52.6B(4)
Wall Sign (Frontage Formula)32 sq ftNot listed1 per building side abutting a streetOn each side of a building abutting a streetUnlock§265-52.6B(5)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Real Estate Sign - Residential Property42 in6 sq ftNot listedNot listed1 per parcelAnywhere within the property line of the premises advertisedUnlock§265-52.6A(1)
Real Estate Sign - Nonresidential Property8 ft16 sq ftNot listedNot listed1 per parcel plus temporary sandwich/open sign during inspection hoursAnywhere within property line; plus second sandwich/open for inspection sign only during inspection hoursUnlock§265-52.6A(1)
Architect/Engineer/Contractor/Financing Institution Sign (Construction Site)8 ft32 sq ftNot listedNot listedNot listedConfined to site of constructionUnlock§265-52.6A(7)
Model Home/Sales Office Sign (Subdivision)1 ft2 sq ftNot listedNot listedNot listedOn the lot or premises denoting model home or sales/rental officeUnlock§265-52.6A(8)
Institutional Bulletin Board/Sign8 ft16 sq ftNot listedNot listedNot listedOn premises of institution (places of worship, schools, hospitals, apartment complexes, etc.)Unlock§265-52.6B(1)
Real Estate Development/Subdivision Sign (Residential)8 ft6 sq ftNot listedNot listed1 per separate business or useOn the premisesUnlock§265-52.6B(2)
Subdivision Identification Sign5 ft (bottom above ground)32 sq ft8 ft (length)Not listedNot listedOn the premises of subdivisionUnlock§265-52.6B(3)
Political Sign6 ft6 sq ftNot listed10 ft from abutting property line; not within ROWNot listedNot in public ROW, not closer than 10 ft to abutting property lineUnlock§265-52.7D

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Holley with a free PermitPal account.

Run a free code check

Prohibited Signs in Holley

  • No sign shall be illuminated by or contain flashing, intermittent, rotating or moving light or lights.
  • No illuminated sign, lighting or reflective device or projected light shall be directed or beamed upon a public street, highway, sidewalk or adjacent premises so as to cause glare or reflection that may constitute a traffic hazard or nuisance.
  • No pennants, banners, posters, ribbons, spinners, streamers, moving signs, flashing or intermittent lights, glittering, reflective, projected, animated, or rotating signs, changing degrees of light intensity or color, or similar eye-catching devices are permitted on any sign accessory thereto or as separate devices. Searchlights and strings of lights shall not be used for advertising or attracting attention.
  • No part of a projecting sign shall extend more than 18 inches from the face of a building unless it is attached to the roof or overhang.
  • No sign attached to a building shall extend above the roof line.
  • No sign shall project over any property line.
  • No sign shall be located on any property other than that which the sign advertises.
  • No portable or temporary sign shall be placed on a building or premises except as otherwise allowed.
  • Preexisting signs which do not comply with the chapter must be brought into conformity upon change of ownership, change of activity advertised (except multi-tenant), failure to maintain, damage or destruction exceeding 51% of replacement cost, or creation of hazard/disturbance to public welfare.
  • No sign shall be painted directly on a building wall.
  • No portable signs are permitted, including any sign displayed on a vehicle or trailer used primarily for the sign display, but excluding parade signs.
  • No signs are permitted that violate any provision of State of New York or United States law or regulation related to outdoor advertising.
  • No signs shall be placed in windows (or behind glass walls) covering more than 20% of exterior glass surface. Illuminated signs are not allowed in windows or behind windows except during business hours. No sign may obstruct window, door, fire escape, stairway, ladder, opening or access intended for light, air, ingress/egress.
  • No sign shall be attached to a utility pole, public or private, except official notices or warnings as previously allowed.
  • No sign shall be permitted which, by location, position, size, shape or color, may obstruct, impair, obscure, or be confused with any traffic control sign, signal or device, nor use the words 'stop', 'caution', 'yield', 'danger', 'warning' or 'go' which could be confused with public traffic control signs.
  • No nonaccessory sign (i.e., billboards or signs relating to an offsite business/product) shall be constructed after this chapter, except garage sale and real estate signs separately regulated.

Exempt Signs in Holley

  • Signs erected and maintained as part of a governmental function or required by law, ordinance or government regulation.
  • Changing the advertised copy or message on an approved painted or printed sign, theater marquee, or similar approved signs specifically designed for changeable copy.
  • Repainting, cleaning and other normal maintenance and repair of a conforming sign or conforming sign structure, unless a structural change is made.
  • Memorial tablets or signs, and historic markers.
  • Signs within a ballpark or similar recreational use which are not visible from a public street or adjacent properties.
  • Flags, emblems or insignia of the United States, State of New York, other countries and states, the United Nations, or similar recognized organizations and of the President or Vice President of the United States.
  • Small signs for public direction or convenience, such as restrooms, telephones, freight entrances, traffic controls, not exceeding two square feet.
  • Freestanding signs or signs attached to fences at eye level, no larger than two square feet, warning the public against hunting, fishing, trespassing, dangerous animals, swimming, or similar hazards.
  • Information or directional signs or historical markers erected by a governmental agency, including signs that give directions to commercial districts for the convenience of the traveling public (but not specific businesses).
  • Civic signs for the purpose of displaying shields, emblems, or signs of civic, charitable, or religious organizations with offices or meeting places in the Village, up to two square feet for each such sign.
  • An illuminated sign displaying only the word 'open,' operational only when the business is open, with no more than two colors, no greater than two square feet, facing the public right-of-way, and only one such sign per premises.

Sign Plan & Submission Notes for Holley

  • For illuminated signs or lighting devices using flashing, intermittent, rotating, or moving light or lights, a special use permit is required from the Planning Board, subject to public hearing and applicable fees.
  • All signs (unless otherwise provided) require a permit from the Code Enforcement Officer prior to erection.
  • Permit applications require a detailed drawing or blueprint showing the sign's appearance, lighting elements, and location plan in relation to nearby buildings and surrounding areas.
  • Board of Appeals is responsible for reviewing and granting variances after public notice and hearing.
  • For temporary signs at 1 Wright Street, a permit, application, and deposit are required; political signs are exempt from this permit but must be registered if on vacant land.

Source: ecode360 municipal code

Frequently Asked Questions

In Holley, the height limit for Directory Sign (Industrial Park Entrance) in the Light Industrial District (LI) is 8 ft (Sec. 265-23C). Maximum sign heights range from 8 ft to 42 in across zoning districts. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Holley require a permit. From the submission notes on this page: Permit applications require a detailed drawing or blueprint showing the sign's appearance, lighting elements, and location plan in relation to nearby buildings and surrounding areas. Run a code check for an exact address to see the permit requirements for that zone.

Holley's sign code covers 20 sign types, including Wall Sign, Directory Sign (Industrial Park Entrance), Freestanding Sign (Setback > 200 ft), and Wall Sign (Frontage Formula). Most commercial signs need a permit. The ordinance lists 11 exemptions. One of them: Memorial tablets or signs, and historic markers. The full list is on this page.

In Holley, Political Sign must be set back 10 ft from abutting property line (Sec. 265-52.7D). The ordinance adds other placement rules for this sign type, listed in the table on this page. Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Holley's sign ordinance that cover digital, changing, or flashing signs: No sign shall be illuminated by or contain flashing, intermittent, rotating or moving light or lights. For illuminated signs or lighting devices using flashing, intermittent, rotating, or moving light or lights, a special use permit is required from the Planning Board, subject to public hearing and applicable fees. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Holley Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Holley, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds