Questions? Call us at (262) 218-2915

Sign Regulations in Hornell, New York

Hornell, New York has specific sign regulations covering 26 sign types across 3 zoning districts. Regulated sign types include Temporary On-Premises Sign, Address and Public Safety Sign, Historic/Memorial Marker or Government Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 21, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Hornell, New York

Sample Sign Requirements in Hornell

Sign TypeMax HeightMax AreaSetback
Nonconforming SignNot listedThree times the allowable sign area (maximum)Not listed
Professional NameplateNot listed2 sq ft per sideNot listed
Dwelling SignNot listed2 sq ft per sideNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for HornellFull Coverage

Sign Types Covered

26

  • Temporary On-Premises Sign
  • Address and Public Safety Sign
  • Historic/Memorial Marker or Government Sign
  • Landmark Sign
  • +2 more types

Zoning Districts

3

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Hornell

Municipal Code1 permit application link available

Frequently Asked Questions

In Hornell, the height limit for Freestanding Sign (Residential Business, not Home Occupation) in the Residential districts is 5 ft (structure height). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Hornell require a permit. From the submission notes on this page: Permit application must be filed with the Code Enforcement Office including an accurate description and location of the sign, character, applicant information, and written consent of the property owner or lessee. Run a code check for an exact address to see the permit requirements for that zone.

Hornell's sign code covers 26 sign types, including Temporary On-Premises Sign, Address and Public Safety Sign, Historic/Memorial Marker or Government Sign, and Landmark Sign. Most commercial signs need a permit. The ordinance lists 12 exemptions. One of them: Professional nameplates not exceeding two square feet per side. The full list is on this page.

In Hornell, For Sale/For Lease Sign must be set back 5 ft from property line (Sec. 315-27C(2)(i)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Hornell's sign ordinance that cover digital, changing, or flashing signs: Flashing signs or signs with moving lights such as scroll signs are prohibited. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Hornell Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Hornell, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Hornell, New York Sign Rules at a Glance

Hornell, New York regulates 26 sign types across 3 zoning districts. For Sale/For Lease Signs are capped at 6 sq ft, set back 5 ft from property line (Sec. 315-27C(2)(i)). Most commercial signs in Hornell require a permit.

Detailed Sign Ordinance Requirements for Hornell, New York

Sign Rules by Zoning District in Hornell (3 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones12Not listed24 sq ftNot listed
Residential districts45 ft (structure height)16 sq ftNot listed
Business districts (B-1, B-2), Industrial districts (I-1, I-2)1048 in100 sq ft (front/face); 5% of any given side; all signage not to exceed 10% of total building frontageNot listed

Zone-by-Zone Sign Requirements in Hornell

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Temporary On-Premises SignNot listedNot listedNot listedNot listedOne per propertyOn property where merchandise is for sale/lease or where event occurs.Not listedUnlock§ 315-27C(2)(a), [§ 315-27C(2)]
Address and Public Safety SignNot listedNot listedNot listedNot listedOne per propertyOn premises.Not listedUnlock§ 315-27C(2)(b)
Professional NameplateNot listed2 sq ft per sideNot listedNot listedNot listedOn premises.Not listedUnlock§ 315-27C(2)(f)
Dwelling SignNot listed2 sq ft per sideNot listedNot listedNot listedOn premises, denotes name and address of occupant.Not listedUnlock§ 315-27C(2)(g)
Contractor SignNot listed6 sq ft per sideNot listedNot listedNot listedOn premise where construction, repair, or renovation is occurring.Not listedUnlock§ 315-27C(2)(h)
For Sale/For Lease SignNot listed6 sq ftNot listed5 ft from property lineMax 2 per premisesOn the property being sold/leased.Not listedUnlock§ 315-27C(2)(i)
Garage Sale/Lawn Sale SignNot listed4 sq ft per sideNot listedNot listedMax 4 per saleAdvertise only the nature and premises of sale.Not listedUnlock§ 315-27C(2)(j)
Home Occupation SignNot listed2 sq ftNot listedNot listedOne per home occupationAffixed flat to the building.Not listedUnlock§ 315-27C(6)

Residential districts

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Off-premise SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§ 315-27D(1)
Building-Mounted or Building-Hung Sign (Residential Business, not Home Occupation)Not listed6 sq ftNot listedNot listedNot listedMounted or hung on building.Not listedUnlock§ 315-27D(3)(a)
Freestanding Sign (Residential Business, not Home Occupation)5 ft (structure height)16 sq ft6 ft (structure width)Not listedNot listedOn property.Not listedUnlock§ 315-27D(3)(b); § 315-27D(3)(c)
Prohibited Signs (Residential)Not listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§ 315-27D(3)(d)

Business districts (B-1, B-2), Industrial districts (I-1, I-2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (Fascia Sign) - Option 1 (Front/Face of Building)Not listed100 sq ft (front/face); 5% of any given side; all signage not to exceed 10% of total building frontageNot listedNot listedCombined amount not to exceed 100 sq ft for front/faceExterior wall of building (front or face), adjacent to public entrances.Not listedUnlock§ 315-27E(1)(a)[1],[2],[3]; § 315-27E(2)(a); § 315-27E(4)
Wall Sign (Fascia) - Option 2 (Side/Rear Facing Street)Not listed65 sq ftNot listedNot listed1 per eligible sideRear and/or side exterior wall of a building facing a street or public way.Not listedUnlock§ 315-27E(2)(b); § 315-27E(4)
Freestanding SignNot listed60 sq ft per side (either of 2 sides)Not listed10 ft from street right-of-way (or as required by NYSDOT); at least 3 ft from building facade; at least 8 ft from sidewalkNot listedFreestanding (ground or pole) at least 10 ft from street right-of-way; not nearer to building facade than 3 ft, or to sidewalk than 8 ft.Not listedUnlock§ 315-27E(5)(a),(b); § 315-27E(4)
Directional SignNot listed2 sq ftNot listedNot listed2 per establishmentOn establishment/property.Not listedUnlock§ 315-27E(1)(a)[6], (2)(c)
Identification Sign (Wall-Mounted, Adjacent to Public Entrance)Not listed2 sq ftNot listedNot listedOne per firm/corporationAttached to exterior wall adjacent to public entrance.Not listedUnlock§ 315-27E(1)(a)[4]
Awning SignNot listedNot listedNot listedNot listedNot listedOn preexisting awning meeting NYS Building Code criteria for safety. For new awnings, must comply with building code and require building & sign permits.Not listedUnlock§ 315-27E(1)(a)[5]
A-frame (Sandwich Board) Sign48 inNot listed30 inNot listedOne per businessOn sidewalk in front of business during business hours.Not listedUnlock§ 315-27E(1)(a)[9]
Projecting SignNot listed60 sq ftNot listedNot listedOne per establishmentAttached to building.Not listedUnlock§ 315-27E(2)(e)

Run a code check for your exact address to get the zone that applies to your property, plus illumination rules, size formulas, and permit requirements for every sign type in Hornell with a free PermitPal account.

Run a free code check

Prohibited Signs in Hornell

  • Off-premises signs are prohibited except for general directory or directional signs which may be approved subject to a special use permit.
  • No sign shall extend over a public right-of-way or public sidewalk, and no sign shall obstruct views from any public right-of-way to any other public right-of-way.
  • Flashing signs or signs with moving lights such as scroll signs are prohibited.
  • No sign shall be illuminated between the hours of 11:00 p.m. and 6:00 a.m. unless the premises are open for general business during such hours.
  • Signs are not permitted to be placed upon utility poles and any such placed signs shall be immediately removed.
  • Signs shall not project beyond the building line more than 12 inches over the sidewalk when erected flat or against said building.
  • When hung at right angles to a building, or on top of a building parallel with the roof, signs shall not extend into or over any street or sidewalk more than six feet from the building line to which the sign is attached, or more than 24 inches from the inside of the curb.
  • No sign or supports or hangings shall be erected so as to cover doors or windows of any building, nor to prevent free ingress and egress to or from any window, door or fire escape of any building, nor be attached to any part of a fire escape or stand pipe.
  • No sign shall be erected in such position as to completely blanket another sign already placed on either side.
  • All wiring, fittings, and materials used in the construction, connection, and operation of electric signs must meet the National Electrical Code and must pass inspection by a recognized electrical inspector.
  • Illumination of signs shall not cause glare onto adjoining properties or public right-of-way.
  • No light shall be placed in such a manner as to be a hazard to the traveling public or cause objectionable glare, either direct or reflected.
  • No signage shall exceed 5% of any given side, and no building may have total signage that exceeds 10% of the total building frontage for all sides (in business/industrial districts, but as a quantity standard).
  • Permanent window signage must not extend closer than 12 inches to the sides or top, and 12 inches from the bottom of the window.
  • No sign shall be maintained on premises which have been vacated.
  • All signs must be constructed of durable materials, maintained in good condition and not allowed to become dilapidated.
  • It is unlawful to erect, alter, relocate, reconstruct, or maintain any sign without first obtaining a permit from the Code Enforcement Officer unless otherwise exempt.

Exempt Signs in Hornell

  • Temporary on-premises, non-illuminated signs advertising the sale or lease of merchandise or a special event are allowed; must be removed within three days after the sale, lease, or event.
  • One non-illuminated sign identifying the property name or residents and the official street address is permitted.
  • Signs necessary for public safety, such as posted, no-trespassing, private drive, parking, exit/entrance signs, and other required by governmental function, law, or regulation.
  • Historic or memorial markers (not associated with commercial activity), as well as flags, insignia or emblems of any government or religious organization and any religious holiday decorations.
  • Any older sign of artistic or historic merit or uniqueness recognized by the Common Council or City Historian is exempt from all dimensional, height, and area requirements.
  • Legally nonconforming signs existing at the effective date of the ordinance may continue (unless exceeding three times the maximum area), but must come into full compliance within seven years.
  • Professional nameplates not exceeding two square feet per side.
  • Dwelling signs denoting name and address of occupants, not exceeding two square feet per side.
  • Construction, repair, or renovation signs denoting architect, engineer, or contractor, not exceeding six square feet per side; must be removed within seven days after completion.
  • Signs advertising sale, lease, or rental of the premises, not exceeding six square feet, placed at least five feet inside the property line; maximum of two per premises; must be removed within seven days after sale or lease.
  • Garage sale, lawn sale, porch sale, etc. signs not exceeding four square feet per side, max four per premises, not on utility poles, to be removed within 48 hours after sale.
  • Building permits are not required for the exempt signs described in §315-27C(2) (the items above).

Sign Plan & Submission Notes for Hornell

  • Building permits are required for all signs except those specifically described as exempt in §315-27C(2).
  • Permit application must be filed with the Code Enforcement Office including an accurate description and location of the sign, character, applicant information, and written consent of the property owner or lessee.
  • For illuminated signs, an application must include a plan or design showing weight, dimensions, electrical or gas equipment, details of attachments and hangings, position relative to the building, and other information as required by the Board of Public Safety.
  • The City may require a plan or design for non-illuminated signs at its discretion but must require one for illuminated signs.
  • All signs requiring the use of electricity must be inspected by an electrical inspector recognized by the City.
  • No explicit reference to a master sign plan or planned sign program or variance meetings is present in this ordinance section.

Source: ecode360 municipal code