Questions? Call us at (262) 218-2915

Sign Regulations in Monroe, New York

Monroe, New York has specific sign regulations covering 14 sign types across 7 zoning districts. Regulated sign types include Freestanding Sign, Chalkboard Sign (Wall-mounted or A-frame), Wall Sign (parallel to building). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Monroe, New York

Sample Sign Requirements in Monroe

Sign TypeMax HeightMax AreaSetback
Wall SignNo wall sign shall be higher than the building to which it is attached.Not listedNot listed
Temporary SignNot listedVaries: Construction sign, 4 sq ft; temporary political/civic, 15 sq ft; business activity, 15 sq ft (total, up to twice per year); special event, up to 30 sq ft (in business districts); Garage/Yard Sale, 4 sq ft (residential, per § 200-39I)Not listed
Wall Sign (parallel to building)2 feet vertical dimensionSee formulaNot listed

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for MonroeFull Coverage

Sign Types Covered

14

  • Freestanding Sign
  • Chalkboard Sign (Wall-mounted or A-frame)
  • Wall Sign (parallel to building)
  • Wall Sign (perpendicular to building)
  • +2 more types

Zoning Districts

7

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Monroe

Frequently Asked Questions

In Monroe, the height limit for Freestanding Sign in the Signage District 1 (SD-1) is 8 feet maximum vertical dimension; 12 feet max above highway level. The height limit for Wall Sign (perpendicular to building) in the Signage District 1 (SD-1) is 3 feet vertical dimension. Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Monroe require a permit. From the submission notes on this page: The Building Inspector or Code Enforcement Officer refers all applications for new and modified signs (except certain temporary signs) to the Planning Board for review and approval prior to issuing a sign permit. Run a code check for an exact address to see the permit requirements for that zone.

Monroe's sign code covers 14 sign types, including Freestanding Sign, Chalkboard Sign (Wall-mounted or A-frame), Wall Sign (parallel to building), and Wall Sign (perpendicular to building). Most commercial signs need a permit. The ordinance lists 10 exemptions. One of them: Handicapped parking space signs not exceeding two square feet in area. The full list is on this page.

This page doesn't list a single setback distance for signs in Monroe. The tables on this page quote the ordinance's placement rules for the sign types we sampled. Run a code check for an exact address to see the setback that applies there.

Rules in Monroe's sign ordinance that cover digital, changing, or flashing signs: No animated and moving signs are permitted. No flashing signs are permitted. No permanent sign or sign component shall be animated, moving, rotating or revolving; no banners, posters, pennants, ribbons, balloons, streamers, spinners, or other similar moving/flashing devices are allowed as permanent signs. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Monroe Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Monroe, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Monroe, New York Sign Rules at a Glance

Monroe, New York regulates 14 sign types across 7 zoning districts. Directional Signs in the Signage District 1 (SD-1) are capped at 2 sq ft per sign (Sec. 200-42D(4)). Most commercial signs in Monroe require a permit.

Detailed Sign Ordinance Requirements for Monroe, New York

Sign Rules by Zoning District in Monroe (7 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones4No wall sign shall be higher than the building to which it is attached.Varies: Construction sign, 4 sq ft; temporary political/civic, 15 sq ft; business activity, 15 sq ft (total, up to twice per year); special event, up to 30 sq ft (in business districts); Garage/Yard Sale, 4 sq ft (residential, per § 200-39I)Not listed
Signage District 1 (SD-1)78 feet maximum vertical dimension; 12 feet max above highway level30 sq ft (each face if two-dimensional, parallel faces)Not listed
Signage District 2 (SD-2)78 feet maximum vertical dimension; 12 feet max above highway level30 sq ft (each face if two-dimensional, parallel faces)Not listed
Signage District 3 (SD-3)7Not to exceed 25% of the total height of the building36 sq ft plus 1 sq ft per 10 parking spaces (up to 1,000), max 50 sq ft (each face if two-dimensional, parallel faces)Not listed
Nonresidence zoning districts1Not listedNot listedNot listed
CB Zone (Central Business Zone)3Not listed6 sq ftNot listed
Residence zoning districts32 feet in any dimension8 sq ftNot listed

Zone-by-Zone Sign Requirements in Monroe(sample of 3 of 7 zones)

Signage District 1 (SD-1)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (parallel to building)2 feet vertical dimensionSee formulaNot listedNot listedOne per building-facing wall, plus one perpendicular (see: Wall Sign - perpendicular).Affixed parallel to building wall facing principal street.Not listedUnlock§ 200-42C table, § 200-42D(1)(a)-(d)
Wall Sign (perpendicular to building)3 feet vertical dimension9 sq ft per sign (each face if two-dimensional, parallel faces)Not listedNot listedOne per building-facing wall, plus one parallel sign.Affixed perpendicular to outer wall facing principal street.Not listedUnlock§ 200-42C table, § 200-42D(1)(a)-(d)
Freestanding Sign8 feet maximum vertical dimension; 12 feet max above highway level30 sq ft (each face if two-dimensional, parallel faces)Not listedNo closer than 10 feet to property line or designated street line or existing street line, plus 1 ft for each 2 sq ft in excess of 36 sq ft.One per lotOn business lot, no sign to face residential if within 50 ft.Not listedUnlock§ 200-42C table, § 200-42D(2)
Directory SignNot listed3 ft x 6 ft per sign6 ftNot listedNot listedDirectory in vestibule/doorway of building or as freestanding sign.Not listedUnlock§ 200-42C table, § 200-42D(6), (7)
Chalkboard Sign (Wall-mounted or A-frame)Not listed6 sq ftNot listedNot listedOne per businessWall-mounted or A-frame-styleNot listedUnlock§ 200-42D(8)
Directional SignNot listed2 sq ft per signNot listedNot listedAs necessaryAccess roads, parking areas.Not listedUnlock§ 200-42D(4)
Address Identification SignNot listed2 sq ftNot listedNot listedOne per relevant wall/entranceAffixed and parallel to outer wall facing street or parking lot not already signed.Not listedUnlock§ 200-42D(3)

Signage District 2 (SD-2)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (parallel to building)2 feet vertical dimensionSee formulaNot listedNot listedOne per building-facing wall, plus one perpendicular.Affixed parallel to building wall facing principal street.Not listedUnlock§ 200-42C table, § 200-42D(1)(a)-(d)
Wall Sign (perpendicular to building)3 feet vertical dimension9 sq ft per sign (each face if two-dimensional, parallel faces)Not listedNot listedOne per building-facing wall, plus one parallel sign.Affixed perpendicular to outer wall facing principal street.Not listedUnlock§ 200-42C table, § 200-42D(1)(a)-(d)
Freestanding Sign8 feet maximum vertical dimension; 12 feet max above highway level30 sq ft (each face if two-dimensional, parallel faces)Not listedNo closer than 10 feet to property line or designated street line or existing street line, plus 1 ft for each 2 sq ft in excess of 36 sq ft.One per lotOn business lot, no sign to face residential if within 50 ft.Not listedUnlock§ 200-42C table, § 200-42D(2)
Directory SignNot listed3 ft x 6 ft per sign6 ftNot listedNot listedDirectory in vestibule/doorway of building or as freestanding sign.Not listedUnlock§ 200-42C table, § 200-42D(6), (7)
Chalkboard Sign (Wall-mounted or A-frame)Not listed6 sq ftNot listedNot listedOne per businessWall-mounted or A-frame-styleNot listedUnlock§ 200-42D(8)
Directional SignNot listed2 sq ft per signNot listedNot listedAs necessaryAccess roads, parking areas.Not listedUnlock§ 200-42D(4)
Address Identification SignNot listed2 sq ftNot listedNot listedOne per relevant wall/entranceAffixed and parallel to outer wall facing street or parking lot not already signed.Not listedUnlock§ 200-42D(3)

Signage District 3 (SD-3)

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Wall Sign (parallel to building)Not to exceed 25% of the total height of the buildingSee formulaNot listedNot listedOne per building-facing wall, plus one perpendicular.Affixed parallel to building wall facing principal street.Not listedUnlock§ 200-42C table, § 200-42D(1)(a)-(d)
Wall Sign (perpendicular to building)3 feet vertical dimension9 sq ft per sign (each face if two-dimensional, parallel faces)Not listedNot listedOne per building-facing wall, plus one parallel sign.Affixed perpendicular to outer wall facing principal street.Not listedUnlock§ 200-42C table, § 200-42D(1)(a)-(d)
Freestanding SignNo vertical limit stated (but 15 ft max above highway level)36 sq ft plus 1 sq ft per 10 parking spaces (up to 1,000), max 50 sq ft (each face if two-dimensional, parallel faces)Not listedNo closer than 10 feet to property line or designated street line or existing street line, plus 1 ft for each 2 sq ft in excess of 36 sq ft.One per lotOn business lot, no sign to face residential if within 50 ft.Not listedUnlock§ 200-42C table, § 200-42D(2)
Directory SignNot listedNot listedNot listedNot listedNot listedDirectory in vestibule/doorway of building or as freestanding sign.Not listedUnlock§ 200-42D(6), (7)
Chalkboard Sign (Wall-mounted or A-frame)Not listed6 sq ftNot listedNot listedOne per businessWall-mounted or A-frame-styleNot listedUnlock§ 200-42D(8)
Directional SignNot listed2 sq ft per signNot listedNot listedAs necessaryAccess roads, parking areas.Not listedUnlock§ 200-42D(4)
Address Identification SignNot listed2 sq ftNot listedNot listedOne per relevant wall/entranceAffixed and parallel to outer wall facing street or parking lot not already signed.Not listedUnlock§ 200-42D(3)

PermitPal covers all 7 zoning districts in Monroe. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Monroe

  • No animated and moving signs are permitted.
  • No flashing signs are permitted.
  • No glaring signs are permitted.
  • No obstructive signs are permitted.
  • No inflatable signs and other objects are permitted.
  • No posters and handbills are permitted.
  • No roof signs are permitted.
  • No simulated traffic signs and obstructions are permitted.
  • No strings of light are permitted.
  • No vehicle signs (except for business logos on actively used registered vehicles for business purposes) are permitted.
  • No multiple signs, logos, or insignia on canopies attached to a building or other structure are permitted.
  • No signs adversely affecting safety (preventing free ingress/egress from doors, windows, fire escapes, or access from one part of the roof to another, or attached to standpipes or fire escapes; open flames to attract attention are not permitted).
  • No signs that emit smoke, visible vapors, particles, sound or odor are permitted.
  • No mirrors used as signs are permitted.
  • No billboards are permitted.
  • No abandoned signs are permitted.
  • No sign shall be erected, replaced, constructed, displayed, moved, reconstructed, extended, enlarged or altered except in conformity with and as expressly authorized by the provisions of this chapter.
  • No sign shall be located so as to obscure any signs displayed by a public authority, obstruct proper sight distance, be erected upon a right-of-way, interfere with pedestrian or vehicular traffic flow, interfere with any door, window, ventilation system, fire escape or emergency exit, or be placed on a public sidewalk or at curb side.
  • No sign shall project or hang over a pedestrian or vehicular right-of-way, except as allowed for certain projecting signs, and with required minimum clearances.
  • No permanent sign or sign component shall be animated, moving, rotating or revolving; no banners, posters, pennants, ribbons, balloons, streamers, spinners, or other similar moving/flashing devices are allowed as permanent signs.
  • All signs must pertain to an ongoing use conducted on the same property on which the sign is located.
  • Sign illumination must not be twinkling, flashing, intermittent (except time/temperature signs), or of changing intensity, and must not cause unreasonable glare beyond the property.
  • All illuminated signs must bear the UL seal or be inspected/certified by a state-authorized electrical inspection company.
  • No wall sign shall be higher than the building to which it is attached.
  • Signs shall be securely anchored.
  • No sign shall have more than two sides.
  • All permanent signs must be maintained in a safe, neat, clean, and attractive condition, constructed of durable materials, and comply with professional quality standards.
  • All signs must comply with maintenance and safety requirements; unsafe or poorly maintained signs are prohibited.
  • On multistory buildings, projecting signs must be attached above first-story windows and below second-story windowsills; on one-story buildings, above first-story windows and below roofline.
  • All wiring to a freestanding sign must be underground and/or concealed within the sign structure.
  • No sign may extend into a vehicular traffic area, and projecting signs over pedestrian or vehicular areas must have prescribed vertical clearances.
  • No sign shall project above the roof or eave line (as defined), except as allowed for parapets.
  • No sign shall emit noise, odor, or particulate matter.

Exempt Signs in Monroe

  • Up to two signs indicating address, number and/or name of occupants of the premises that do not exceed two square feet in area per side and do not include any commercial advertising or other identification.
  • Decals affixed to windows or door glass panels, such as those indicating membership in a business group or identifying credit cards accepted.
  • Flags, emblems and insignia of government agencies, religious, charitable, public or nonprofit organizations, subject to area and height limitations (no single flag over 40 square feet, maximum three flags per parcel, total area limits and flagpole height limits apply).
  • Handicapped parking space signs not exceeding two square feet in area.
  • On-premises private drive signs, limited to one per driveway entrance, maximum two square feet, language limited to 'private drive' and addresses.
  • Signs erected by government agencies or utilities, including traffic, utility, safety, railroad crossing, public facility identifications, and any signs erected by the Village under the Board of Trustees.
  • On-premises security and warning signs, such as 'no trespassing,' 'no hunting,' and 'no soliciting', limited to one sign two square feet in residential areas and one sign five square feet in commercial/industrial zones (except to the extent state law requires more).
  • Temporary real estate signs (limited to one per property and six square feet in area in residential zones, 32 square feet in all other zones; must be removed within 30 days of settlement or lease of property).
  • Temporary political signs (no larger than 15 square feet in residential zones; must be removed within two weeks of the election).
  • Garage or yard sale signs (not exceeding four square feet; not erected more than four days prior to the event; must be removed one day after the sale).

Sign Plan & Submission Notes for Monroe

  • All freestanding signs require site plan approval by the Planning Board prior to installation. Any freestanding sign over 10 feet in height requires certification by a professional engineer or architect to withstand 100 mph winds.
  • Any modification or alteration (except repairs and identical replacement) to a freestanding sign, wall sign, or projecting sign requires approval by the Planning Board prior to permit issuance.
  • The Building Inspector or Code Enforcement Officer refers all applications for new and modified signs (except certain temporary signs) to the Planning Board for review and approval prior to issuing a sign permit.
  • Temporary signs as regulated in § 200-40.8 are not subject to Planning Board review, but may require a permit from the Building Inspector or Code Enforcement Officer.
  • A landscaping plan (including a sketch) is required as part of the sign permit application for any freestanding sign.
  • Projecting and hanging signs require proof of liability insurance naming the Village as additional insured and are subject to yearly inspections.
  • Any discrepancies between approved sign plans and constructed signs must be corrected within 20 days after written notice or the sign may be ordered removed.
  • All signs erected after the effective date must have date of approval, sign permit number, and (for electric signs) voltage conspicuously affixed.
  • Application for a sign permit requires the submission of (1) location; (2) type and description; (3) drawings/specifications; (4) additional info if requested; (5) fee; (6) landscaping plan if freestanding.

Source: ecode360 municipal code