Sign Regulations in Montour Falls, New York

Montour Falls, New York has specific sign regulations covering 20 sign types across 4 zoning districts. Regulated sign types include Name Plate Sign, Permanent Sign (16 sq ft or more), Temporary Sign (Portable Signs except Sandwich Board). Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Sign Regulation Overview for Montour Falls, New York

Sample Sign Requirements in Montour Falls

Sign TypeMax HeightMax AreaSetback
Permanent Sign (16 sq ft or more)No universal max; see zone/district rules
Traffic Directional/Informational Signs (Entrance/Exit/Parking)No greater than necessary for normal vision
Special Event/Political/Event Banner64 sq ft total surface area max

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Montour FallsFull Coverage

Sign Types Covered

20

  • Name Plate Sign
  • Permanent Sign (16 sq ft or more)
  • Temporary Sign (Portable Signs except Sandwich Board)
  • Public Signs
  • +2 more types

Zoning Districts

4

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Montour Falls

Municipal Code1 permit application link available

Frequently Asked Questions

Sign height limits in Montour Falls vary by zone and sign type. Wall signs typically range from 25-40 feet, while monument signs are usually limited to 6-10 feet. Use PermitPal to get exact requirements for your property.

To get a sign permit in Montour Falls, submit an application to the local building or planning department with sign dimensions, location, and design specifications. Our data confirms permits are required for most commercial signs. Processing typically takes 1-4 weeks. PermitPal helps you identify specific requirements and prepare complete applications.

In Montour Falls, regulated sign types include Name Plate Sign, Permanent Sign (16 sq ft or more), Temporary Sign (Portable Signs except Sandwich Board), Public Signs, and 2 more types. Most commercial signs require permits. Temporary signs and certain small signs may be exempt. Use PermitPal for specific exemptions.

Sign setback requirements in Montour Falls vary by zone and sign type, typically ranging from 5-15 feet from property lines. Use PermitPal for specific setback requirements at your location.

Digital and LED signs in Montour Falls are regulated with specific requirements for brightness, animation, and message duration. Montour Falls has documented illumination rules in our database. Use PermitPal to see the exact requirements for electronic message centers.

AI-Powered Research

Ready to Research Montour Falls Sign Permits?

Stop spending hours searching through municipal codes. Get instant access to Montour Falls, New York sign regulations with PermitPal's AI-powered platform.

No credit card required · Get results in seconds

Montour Falls, New York Sign Rules at a Glance

Montour Falls, New York regulates 20 sign types across 4 zoning districts. Freestanding Sign (Pole Sign)s in the RLB District, RD District, HC District, B-1 District, GD District zoning district are capped at 20 ft tall and 32 sq ft (both sides combined), with a Minimum 25 ft from highway right-of-way, side yard setbacks per district for principal structures. setback (Sec. §160-28I(1)). Most commercial signs in Montour Falls require a permit.

Detailed Sign Ordinance Requirements for Montour Falls, New York

Sign Rules by Zoning District in Montour Falls (4 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
General Regulations For All Zones98 ft200 sq ft aggregate for businesses on Routes 14 or 224, 100 sq ft in other cases
RLB District, RD District, HC District, B-1 District, GD District420 ft64 sq ft (both sides combined)
R-1 District, R-2 District, RMH District232 sq ft (double sided); 20 sq ft (single sided)
CB District615 ft per sign36 sq ft

Zone-by-Zone Sign Requirements in Montour Falls(sample of 3 of 4 zones)

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Permanent Sign (16 sq ft or more)No universal max; see zone/district rulesUnlock§160-28A, B, C, Q
Temporary Sign (Portable Signs except Sandwich Board)Unlock§160-28M
Public SignsNo restriction; exception to content/wording rules.Unlock§160-28F(5)
Traffic Directional/Informational Signs (Entrance/Exit/Parking)No greater than necessary for normal visionBusiness siteUnlock§160-28N
Special Event/Political/Event Banner64 sq ft total surface area maxUnlock§160-28O
Neon Sign4 sq ftUnlock§160-28Q
Commercial Directory Sign8 ft20 sq ft per side (complex ID), 10 sq ft per side (each business)Any nonresidential lotUnlock§160-28P
Master Signage Plan200 sq ft aggregate for businesses on Routes 14 or 224, 100 sq ft in other casesUnlock§160-28G, H

RLB District, RD District, HC District, B-1 District, GD District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Freestanding Sign (Pole Sign)20 ft32 sq ft (both sides combined)Minimum 25 ft from highway right-of-way, side yard setbacks per district for principal structures.Max 1 per lot or one per 200 ft frontage, up to total of 3.Minimum 25 feet setback from edge of highway right-of-way.Unlock§160-28I(1)
Freestanding Sign (Ground Sign)6 ft64 sq ft (both sides combined)See pole sign for 25 ft from highway right-of-way and side yard setbacks.Max 1 per lot or one per 200 ft frontage, up to total of 3.Unlock§160-28I(2)
Wall SignNo part may exceed 1/2 its distance from highway R-O-W in height. No part above roof line or outside wall ends.No explicit limit; governed by allowed areaAttached to business building and not projecting more than 18 inches.Unlock§160-28J
Name Plate Sign2 sq ft1 per lotUnlock§160-28I(3)

CB District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements — available with a free PermitPal account)Ordinance Citation
Sandwich Board / A-frame Sign10 sq ft2Within 10 feet of the principal building entrance.Unlock§160-28L(1)
Awning/Canopy/Marquee Sign16 sq ft per signAwning, canopy or marqueeUnlock§160-28L(2)
Changeable Letter or Fuel Price Sign36 sq ft1Unlock§160-28L(3)
Flag (Nongovernmental)24 sq ftUnlock§160-28L(4)
Freestanding Sign (CB)15 ft per sign32 sq ft (per sign), 100 sq ft aggregate max, or 1 sq ft per linear foot of lot frontage, whichever is lessNumber as permitted by aggregate area (100 sq ft/1 sq ft per frontage foot), but no individual sign >32 sq ft.Unlock§160-28L(5),(6)
Projecting Sign32 sq ft1 (substitute for freestanding sign; see note)Unlock§160-28L(5)

PermitPal covers all 4 zoning districts in Montour Falls — full sign requirements for every zone, plus illumination rules, size formulas, and permit requirements for every sign type — with a free account.

See all 4 zones for Montour Falls — start free

Prohibited Signs in Montour Falls

  • All signs shall be immediately removed when the reasons for their erection no longer apply.
  • Signs shall not be permitted on the roof or above the roof line of the building to which they are attached.
  • No part of any sign shall project above the top or beyond the ends of the wall surface upon which it is located or extend more than 18 inches perpendicular from such surface.
  • Signs other than official traffic signs shall comply with side yard setbacks as established for principal structures in the district where the sign is located.
  • No sign, except a public sign, visible from a public street, shall use the words 'stop,' 'danger,' or any other word, phrase, symbol or character that could be interpreted by a motorist as being a public safety warning or traffic sign.
  • No light shall be permitted that by reason of intensity, color, location, movement or directions of its beam may interfere with public safety.
  • No sign or other advertising material or merchandise displayed for such purpose shall be attached to any tree, utility pole, public structure or other object not intended for such use.
  • No sign shall exceed in height 1/2 its distance from the highway right-of-way, notwithstanding any other height limitation which may also be applicable.
  • Portable signs, except for sandwich board signs as permitted, shall not be permitted except as temporary signs for use a maximum of 30 days per calendar year.
  • No owner of any sign or lessee or owner of any land upon which the sign is located shall permit such sign to become unsightly or in disrepair so as to endanger the public or to become a public nuisance.

Exempt Signs in Montour Falls

  • Signs to provide for the normal and safe flow of traffic into and out of the place of business such as entrance, exit and parking signs are permitted in excess of the limitations provided herein, provided such signs are of a size no greater than necessary for persons of normal vision to observe.
  • Special advertising signs or banners not exceeding 64 square feet in total surface area, including those announcing commercial sales days, cultural or entertainment attractions, charitable activities, or political signs, are permitted for the length of the activity, but in no case exceeding 30 days after the event.

Sign Plan & Submission Notes for Montour Falls

  • Permanently placed signs of 16 square feet or more in surface area on one side require sign permits issued by the Code Enforcement Officer.
  • All freestanding signs and wall signs of 24 square feet or more in total surface area on one side require submission to the Planning Board for review and approval prior to permit issuance.
  • Business and property owners are encouraged to submit master signage plans specifying all sign details for the property; such plans must be prepared by a qualified professional.
  • Master signage plans shall be submitted for approval to the Planning Board, which may waive standards relating to numbers or sizes of signs if the plan meets Design Guidelines and aggregate sign area limits.
  • When a master signage plan is approved, no further permits are required for any sign in compliance with the plan.

Source: ecode360 municipal code