Questions? Call us at (262) 218-2915

Sign Regulations in Montgomery Town, New York

Montgomery Town, New York has specific sign regulations covering 20 sign types across 5 zoning districts. Regulated sign types include Professional or Announcement Sign, Real Estate "For Sale" or "For Rent" Sign / Construction Sign, Temporary Sign. Height restrictions apply. Permits are required for most commercial signs. Use PermitPal to get instant access to the complete regulations.

Data last verified: April 28, 2025

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

Sign Regulation Overview for Montgomery Town, New York

Sample Sign Requirements in Montgomery Town

Sign TypeMax HeightMax AreaSetback
Professional or Announcement Sign6 feet above natural ground (home occupations/professional); varies for others2 sq ft for home professional offices or home occupations; 12 sq ft for churches or other places of worship, 6 sq ft for parish house, club, school, or public/semi-public buildingsProfessional/home: 15 ft from all property lines; church/worship: 15 ft front, 25 ft others
Personal Identification SignNot listed2 sq ftNot listed
Real Estate "For Sale" or "For Rent" Sign / Construction SignNot listedMinimum 8 sq ft, Maximum 24 sq ftAt least 5 feet from right-of-way or traveled way, whichever is greater

* Sample data shown. Actual requirements may vary by zone. Use PermitPal for complete, location-specific regulations.

PermitPal Coverage for Montgomery TownFull Coverage

Sign Types Covered

20

  • Professional or Announcement Sign
  • Real Estate "For Sale" or "For Rent" Sign / Construction Sign
  • Temporary Sign
  • Business Identification Sign - Wall Identification Sign
  • +2 more types

Zoning Districts

5

Different zoning districts with specific sign regulations

Data Includes

  • Permit requirements
  • Height restrictions
  • Illumination rules

Official Resources for Montgomery Town

Municipal Code2 permit application links available

Frequently Asked Questions

In Montgomery Town, the height limit for Business Identification Sign - Ground Identification Sign (Industrial Use) in the I-1 District is 18 ft (ground-mounted) (Sec. 235-13.5B(2)). Other zones and sign types can have different limits. Run a code check for an exact address to see the limit that applies there.

Most commercial signs in Montgomery Town require a permit. From the submission notes on this page: All signs which exceed 15 feet in height shall require plans approved by a licensed professional engineer or architect. Run a code check for an exact address to see the permit requirements for that zone.

Montgomery Town's sign code covers 20 sign types, including Professional or Announcement Sign, Real Estate "For Sale" or "For Rent" Sign / Construction Sign, Temporary Sign, and Business Identification Sign - Wall Identification Sign. Most commercial signs need a permit. The ordinance lists 1 exemption. One of them: Identification-directional signs of eight square feet or less per side at each lot access may be permitted, as long as they do not obstruct motorists' view and do not exceed 10 feet in height. The full list is on this page.

In Montgomery Town, Identification-Directional Sign (Access Point) must be set back 5 feet from property line (Sec. 235-13.1B(2)). Setbacks for other zones and sign types can differ. Run a code check for an exact address to see the setback that applies there.

Rules in Montgomery Town's sign ordinance that cover digital, changing, or flashing signs: Intermittent or flashing lights shall not be used on or in any sign or in conjunction with any sign. Moving or animated signs shall be prohibited. Run a code check for an exact address to see the full illumination rules for that zone.

AI-Powered Research

Ready to Research Montgomery Town Sign Permits?

Stop spending hours searching through municipal codes. Enter your address and PermitPal returns the sign rules that apply to your property in Montgomery Town, New York, with citations from the municipal code.

Need the sign code for this address?

PermitPal is an independent research tool for sign companies. We are not the city's permit office.

No credit card required · Get results in seconds

Montgomery Town, New York Sign Rules at a Glance

Montgomery Town, New York regulates 20 sign types across 5 zoning districts. Identification-Directional Signs (Access Point) are capped at 10 feet tall and 8 sq ft per side, set back 5 feet from property line (Sec. 235-13.1B(2)). Most commercial signs in Montgomery Town require a permit.

Detailed Sign Ordinance Requirements for Montgomery Town, New York

Sign Rules by Zoning District in Montgomery Town (5 zones)

Zoning DistrictSign Types RegulatedMax HeightMax AreaPermit Required
Residential and Agriculture Districts46 feet above natural ground (home occupations/professional); varies for othersMinimum 8 sq ft, Maximum 24 sq ftNot listed
Business Districts (B-1, B-2, B-3 and Crossroads Commercial Overlay District)520 ft measured from street centerline100 sq ft per side (double-faced allowed)Not listed
I-1 District850 ft measured from street centerline300 sq ft per side (double-faced)Not listed
I-2 District, I-3 District6Height of building (not to exceed 35 ft)Minimum 8 sq ft, Maximum 24 sq ftNot listed
General Regulations For All Zones710 feet8 sq ft per sideNot listed

Zone-by-Zone Sign Requirements in Montgomery Town(sample of 3 of 5 zones)

I-1 District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Professional or Announcement Sign6 feet above natural ground (home occupations/professional); varies for others2 sq ft for home professional; 12 sq ft churches; 6 sq ft others (as per §235-13.2)Not listedProfessional/home: 15 ft from all property lines; church/worship: 15 ft front, 25 ft others1 per premises; churches/worship: 1 per street frontage; clubs/schools/etc.: 1 per street frontageOn building wall or in required front yard (at least 15 ft from all property lines for home professional/occupation); 15 ft front, 25 ft other property lines for churches/worshipNot listedUnlock§235-13.2A-E
Business Identification Sign - Wall Identification Sign (Business Use)Not listed2 sq ft per horizontal foot of building wallNot listedNot listedNot specifiedWallNot listedUnlock§235-13.5A(1)
Business Identification Sign - Ground Identification Sign (Business Use) (Route 208 or Town/County Roads)25 ft measured from street centerline100 sq ft per side (double-faced or single-faced)Not listedNot listedNot specifiedErected where building is set back 40 ft or more from street lineNot listedUnlock§235-13.5A(2)(a),(c),(e)
Business Identification Sign - Ground Identification Sign (Business Use) (Interstate 84)50 ft measured from street centerline300 sq ft per side (double-faced)Not listedNot listedNot specifiedErected where building is set back 40 ft or more from street lineNot listedUnlock§235-13.5A(2)(b),(d),(e)
Business Identification Sign - Wall Identification Sign (Industrial Use)Not listed2 sq ft per horizontal foot of building wallNot listedNot listed1 per street from which access is providedWall, facing each street from which access is providedNot listedUnlock§235-13.5B(1)
Business Identification Sign - Ground Identification Sign (Industrial Use)18 ft (ground-mounted)Not listedNot listedAt least 1/2 the depth of the required front yard1 per street from which access is providedFacing each street from which access is providedNot listedUnlock§235-13.5B(2)
Real Estate "For Sale" or "For Rent" Sign / Construction SignNot listedMinimum 8 sq ft, Maximum 24 sq ftNot listedAt least 5 feet from right-of-way or traveled way, whichever is greater1 per public street frontage for single lots/buildings; 2 subdivision signs per frontage per approved subdivisionNot listedNot listedUnlock§235-13.1A; §235-13.6A
Temporary SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§235-13.1A; §235-13.6B

I-2 District, I-3 District

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Professional or Announcement Sign6 feet above natural ground (home occupations/professional); varies for others2 sq ft for home professional; 12 sq ft churches; 6 sq ft others (as per §235-13.2)Not listedProfessional/home: 15 ft from all property lines; church/worship: 15 ft front, 25 ft others1 per premises; churches/worship: 1 per street frontage; clubs/schools/etc.: 1 per street frontageOn building wall or in required front yard (at least 15 ft from all property lines for home professional/occupation); 15 ft front, 25 ft other property lines for churches/worshipNot listedUnlock§235-13.2A-E
Business Identification Sign - Wall Identification SignHeight of building (not to exceed 35 ft)2 sq ft per horizontal foot of building wallNot listedAt least 1/2 the depth of required front yard1 per street with accessOne per street access, wall or ground, facing street from which access to the lot is providedNot listedUnlock§235-13.4A,C
Business Identification Sign - Ground Identification SignHeight of building (not to exceed 35 ft); if building <18 ft, max height 18 ftNot listedNot listedAt least 1/2 the depth of required front yard1 per street with accessGround, facing each street from which access is providedNot listedUnlock§235-13.4A,C
Identification Sign (at each point of access)Not listed2 sq ftNot listedNot listed1 per point of accessAt each point of access to lotNot listedUnlock§235-13.4B
Real Estate "For Sale" or "For Rent" Sign / Construction SignNot listedMinimum 8 sq ft, Maximum 24 sq ftNot listedAt least 5 feet from right-of-way or traveled way, whichever is greater1 per public street frontage for single lots/buildings; 2 subdivision signs per frontage per approved subdivisionNot listedNot listedUnlock§235-13.1A; §235-13.6A
Temporary SignNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§235-13.1A; §235-13.6B

General Regulations For All Zones

Sign TypeMax HeightMax AreaMax WidthSetbackSigns AllowedLocationPermit RequiredPremium Details(Illumination, Size Formula, Permit Requirements, Additional Requirements, available with a free PermitPal account)Ordinance Citation
Identification-Directional Sign (Access Point)10 feet8 sq ft per sideNot listed5 feet from property line1 per access pointAt each point of access to a lotNot listedUnlock§235-13.1B(2)
On-site Directional Sign10 feet (unless mounted on a building/structure)8 sq ftNot listedNot listedNot listedOn-siteNot listedUnlock§235-13.1B(3)
Wall Sign - Multiple on Same WallNot listedLimited to cumulative permitted area on wall per zoning regulationsNot listedNot listedMore than one permitted on same wall; see main limitsEach wall surfaceNot listedUnlock§235-13.1B(4)
Illuminated Sign - Lighting/Color RestrictionNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§235-13.1B(5); §235-13.3C; §235-13.4C
Sign Exceeding 15 feet in HeightNot listedNot listedNot listedNot listedNot listedNot listedNot listedUnlock§235-13.1B(1)
Business or Industrial Ground-mounted Sign (Special Permit)Max letter height 4 ft, minimum as per table; overall sign size minimum needed for message as found by Planning BoardNot listedNot listedNot listedNot listedGround-mountedNot listedUnlock§235-13.1C(1)-(3)
Real Estate or Construction Signs (General Requirements)Not listed8 to 24 sq ftNot listedAt least 5 feet from right-of-way or traveled wayNot listedNot listedNot listedUnlock§235-13.6A,C

PermitPal covers all 5 zoning districts in Montgomery Town. Run a code check for your exact address to get the zone that applies to your property and its full sign requirements with a free account: illumination rules, size formulas, and permit requirements for every sign type.

Run a free code check

Prohibited Signs in Montgomery Town

  • Intermittent or flashing lights shall not be used on or in any sign or in conjunction with any sign.
  • Moving or animated signs shall be prohibited.

Exempt Signs in Montgomery Town

  • Identification-directional signs of eight square feet or less per side at each lot access may be permitted, as long as they do not obstruct motorists' view and do not exceed 10 feet in height.

Sign Plan & Submission Notes for Montgomery Town

  • All signs which exceed 15 feet in height shall require plans approved by a licensed professional engineer or architect.
  • Permanent real estate development or subdivision signs shall only be allowed as part of a landscape plan for said development that has been approved by the Planning Board as part of a site plan or subdivision.
  • Temporary directional signs indicating the location of a real estate subdivision are permitted as special permit uses for a period of one year, with extensions subject to Planning Board approval.

Source: ecode360 municipal code